This will allow the heater to stabilize the temperature and ensure that all equipment is working properly. After this
24-48 hour
period, you can immediately add fish once you have added Tetra AquaSafe® to the water. When you do add your fish, float them in a plastic container for 20-30 minutes.
Is it safe to add water conditioner with fish in tank?
Too much water conditioner can kill fish. That said, not using a water conditioner is far more likely to kill a fish than using too much water conditioner. Realistically speaking,
adding a water conditioner to your fish tank will not kill your fish unless you grossly exceed the recommended dosage
.
Can you add fish immediately?
You can add fish as soon as tank water is dechlorinated and to temperature, as long as you add the right bacteria
, and the manufacturer states that it is possible to do so. But for the best possible (safest,) results start to Fishless Cycle on the day that the water is dechlorinated and to temperature.
Do I have to wait 24 hours to put fish in tank?
Please take into consideration that
it is critical to allow the tank to sit for 24 hours before you add the fish
. This is purposely done to ensure the accumulation of healthy bacteria buildup inside the tank.
Does AquaSafe work immediately?
AquaSafe PLUS works instantly
to make tap water safe for fish. The PLUS BioExtract formula contains natural biopolymers and essential vitamins and minerals for healthy and clear water. Substances in tap water (like chlorine, chloramines and heavy metals) that are dangerous to fish are removed or neutralized.
Does AquaSafe plus remove ammonia?
AquaSafe Plus
does not remove ammonia
, no. It removes chlorine, chloramines, and heavy metals, making tapwater safe for all freshwater fish and intertebrates.
How often should I use AquaSafe?
Change the Filter Cartridge at least every four weeks, or when you see a noticeable reduction in water flow. * Add AquaSafe
®
or SafeStart
®
whenever you add water or fish to your aquarium
.
How fast does Betta conditioner work?
As a rule of thumb, the
chlorine is often treated within 2 minutes
and other substances such as chloramine will take 5 minutes to be neutralized. Either way, as you can tell it’s not going to be too long.
How much water conditioner should I put in my fish tank?
Directions: Use attached dosage cap and add
5 ml (1 tsp) per 10 gallons of water
. Aqueon Water Conditioner instantly neutralizes choline and chloramines typically found in tap water, making it safe for fish.
How long does it take for substrate to settle?
Sand is light and it is going to float around in the water. Some people report that it can take
up to 7 days
for the sand to settle. However, there are a few little tricks in your aquarium arsenal you can put to use to try and speed up the process.
How do I know when my aquarium is ready for fish?
When Is My Tank Ready for Fish? Your tank is ready to add fish
when your ammonia tests are quickly dropping over the course of a day, and your nitrite level has risen and subsequently dropped back to 0ppm
. Once you reach this point, you are ready to add your first fish.
How long should I keep lights off for new fish?
Following are the steps to acclimate your new fish: Turn off all aquarium lights to reduce stress on aquatic life. Thoroughly wash your hands to remove perfumes, lotions, etc. Float the sealed bag in your aquarium for
at least 15 minutes but no longer than one hour
to allow for temperature acclimation.
How do I cycle my fish tank in one day?
What happens if I use too much AquaSafe?
What happens if I have added too much Tetra AquaSafe to my aquarium?
Slightly exceeding the dosage of the Tetra AquaSafe tap water conditioner is harmless
. Even if you increase the dose by up to twice the amount, Tetra AquaSafe is not harmful.
Is AquaSafe safe for goldfish?
Tetra AquaSafe Water Conditioner is an all-in-one formula that
works to keep your aquarium safe and healthy for your goldfish in their environment
. It detoxifies harmful ammonia, neutralizes chlorine, chloramines and heavy metals and features stress reducing slime.
How do you use AquaSafe water conditioner?
Use it monthly to condition water and protect fish – works instantly. The powerful slime reduces stress. Treat water when setting up a new aquarium and with monthly partial water changes or evaporation replacement.
Add 2 teaspoons (10 mL) for every 10 gallons (38 liters) of aquarium water
.
Does AquaSafe plus remove nitrite?
does this also take out chlorine or should i be using this in combination with Aqua safe plus? This product does not remove chlorine or chloramine, however
it does reduce ammonia and nitrite
. This product has live bacteria to provide a safe and healthy environment for your fish.
Does AquaSafe reduce nitrates?
Tetra Aquasafe removes chlorine and chloramines, protects delicate areas of the fish,
removes nitrate
and ammonia and helps protect your fish from stress often present following a water change.
Does AquaSafe remove chloramine?
AquaSafe neutralizes or eliminates chlorine, chloramine and heavy metals
. If you have a small aquarium, you may want to consider using spring water, which does not contain harmful chemicals.
What are some signs of ammonia stress in a tank?
- Lethargy.
- Loss of appetite.
- Hovering at the bottom of the tank (especially for surface dwelling fish)
- Gasping at the surface.
- Inflamed gills.
- Red streaks or inflammation in the fins.
- Inflamed eyes or anus.
How long does it take for water conditioner to work?
This treatment works immediately and takes
approximately 24 hours
to cycle through depending on the dosage used and tank gallon size.
Do I need to add anything to aquarium water?
Ordinary tap water is fine for filling up the aquarium as long as you let it sit for several days before adding fish
(the chlorine in the tap water will kill the fish). You may also purchase dechlorination solutions at our store.
