Measure for the shutter height at the left side, middle, and right side of the window opening from the top of the window to the bottom excluding any window sill. If the heights vary at each of these points, use the SMALLEST of the three measurements. This measurement will be the height of the shutter you need to order.
How do you measure for functional exterior shutters?
Measure for the shutter height at the left side, middle, and right side of the window opening from the top of the window to the bottom excluding any window sill. If the heights vary at each of these points, use the smallest of the three measurements. This measurement will be the height of the shutter you need to order.
How do you measure house shutters?
Measure for the shutter height at the left side, middle, and right side of the window opening from the top of the window to the bottom excluding any window sill. If the heights vary at each of these points, use the SMALLEST of the three measurements. This measurement will be the height of the shutter you need to order.
Can exterior shutters be longer than the window?
It is advisable to select a width size divisible into the window width. Shutter size should be between 25-50% of the window width in order to remain aesthetically pleasing. Never install house shutters that are wider than the window .
Where should exterior shutters be placed?
In most cases, decorative exterior shutter height is most appropriate when it is from the top to the bottom of the window trim . If there is a sill at the bottom of the window, exclude its height from your measurements as you want to maintain the appearance that the shutters will close over the window.
Should you put shutters on all windows?
Contrary to popular belief, not every window needs shutters. ... Proper shutters should at least appear large enough to cover the entirety of the window when shut (as that’s, you know, the whole point of shutters). Shutters should be avoided on double-mulled windows , picture windows, bay windows, and most dormer windows.
How thick should shutters be?
Shutter stiles shall be a minimum of 2-5/8 inches wide by 1 3/8 inches thick . Top rails and midrails shall be a minimum of 2 3/8 inches wide by 1 5/16 inches thick. Bottom rails shall be minimum 4 1/8 inches wide by 1 3/8 inches thick.
What is the standard width of exterior shutters?
| Window Width Shutter Width | 16′′ or smaller 7′′ | 17′′ – 22′′ 9′′-10′′ | 23′′ – 31′′ 12 “-14.5” | 32′′ – 40′′ 14.5′′-16.25′′-17.75′′ |
|---|
Do exterior shutters add value to your home?
With exterior shutters, you can improve your home’s value and a lot more. This window treatment technique protects your house, boosts energy efficiency, and improves curb appeal. Shutters also enhance privacy and help transform the exterior décor.
Should all exterior shutters be the same width?
We recommend a shutter width about 1/3 of the window . As a general rule try to keep all the shutter widths uniform as this will give you a much cleaner overall appearance but there are always exceptions to any rule.
Can you trim vinyl shutters?
It is best to trim the shutters with a stationary power saw , like a power miter saw, a table saw or a radial arm saw, because it is difficult to make accurate cuts with a hand saw. Trim the bottom of the shutters first, but do not cut off more than three-quarters of an inch.
How wide should board and batten shutters be?
Building Board and Batten Shutters
Go ahead and cut all of your boards to length on a miter saw, and then make any rips that you need to accommodate the width of your window. ... Each batten will run diagonally across the boards and should be just shy of the width of your shutter .
How far should shutters be from window?
In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim . If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.
Do shutters go on back of house?
Whether it’s high winds or flying debris, functional shutters act as a shield for your windows and help keep everything inside safe. Windows at the back of a home are just as vulnerable to weather damage as those in the front; therefore, shutters can provide the same benefits on both sides.
How much does it cost to have shutters installed?
| Window Size Shutter Price | 72”x96” $1,140 |
|---|
