If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves .
How do you light a self igniting water heater?
- Open the door/cover over the pilot light access. ...
- Use a flashlight or a headlamp to find the burner inside. ...
- Turn the gas knob to “Pilot,” press and hold it down. ...
- While still holding the gas down, light that pilot.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves .
How much does it cost to relight a pilot?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100 . Have you ever relit your own pilot light?
What do I do if pilot light goes out?
- Turn off your appliance at the power switch or thermostat.
- Find the gas valve control knob and turn it to select “pilot.”
- If pilot light controls are sticky, do not apply force or use oil. ...
- Press the red button while simultaneously holding a match to the pilot burner.
Does leaving the pilot light use much gas?
How much gas does a pilot light require? Most pilot lights consume around 600 BTUs of gas every hour . If you leave your pilot light on for an entire day, it would roughly consume 14,400 BTU's every day.
Why do pilot lights go out on hot water heaters?
If the pilot light goes out, the thermocouple senses the drop in temperature and signals for the gas valve to close . If you have a faulty thermocouple is the most common reason that your pilot light is malfunctioning. Over time your water heater will collect dirt, dust and other kinds of debris.
How much does it cost to relight a water heater?
If you follow safe procedures, you can relight this component on your own. This would save you a service call fee, which could range from $45 to $150 per hour . If it doesn't light, you could have thermocouple or valve issues.
Is it bad if your pilot light goes out?
The pilot light is a small, blue flame that is used to ignite the natural gas being pumped into the main burner. ... This tube is fitted with a safety valve (the thermocouple), which stops the flow of gas if the pilot light goes out. This prevents gas from building up in your furnace, posing a safety hazard .
Should pilot light always be on water heater?
The pilot should be on the water heating the house . The pilot flame can be difficult to see through a window. To know if the pilot is on or off, you need to remove the access door and shield and look at the burner and pilot through it.
Can you get carbon monoxide poisoning from a pilot light?
A pilot light should be a crisp blue colour. ... A yellow or orange pilot light will produce carbon monoxide – an odourless, colourless gas that can fill your home and cause carbon monoxide poisoning. Symptoms of this condition include dizziness, headache, fatigue, nausea, unconsciousness, brain damage and death.
Should I turn off pilot light in summer?
As the weather warms up , it is time to put your gas fireplaces and furnaces to rest for the summer. Since it will be several months before you need to fire up the heat again, it is worth considering turning off your system's pilot light.
Is it OK to leave gas fireplace on overnight?
DON'T leave the unit on overnight . DO leave the flue open so that excess carbon monoxide is vented. The main concern with a gas-burning appliance is the exhaust of carbon monoxide and leaving the unit on overnight is simply risky.
What to do if you accidentally left the gas on?
If you smell gas , and no stove burners were left on, evacuate the house as quickly as possible and call 9-1-1. Then, call your natural gas provider (your utility). Please note: a utility does not provide propane. Another situation in which you may smell gas is when you leave your stove on by accident.
How do you know if you have a bad thermocouple?
If you can't get the flame to light at all, and you're sure the gas is on, there's probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds , that's the sign of a thermocouple malfunction.
How much does it cost to replace a thermocouple on a water heater?
The thermocouple is an apparatus that senses whether the pilot light is lit and triggers the gas control valve. Repairs typically cost about $150 to have it done professionally, though a new thermocouple itself only costs about $20 on average.
