For a 5×5 tent, it’s best to use about 1000 watts (High-Pressure Sodium) lights. HPS lights appear to be yellow in color, but these have the color spectrums yellow and red. Both spectrums are great for flowering plants. However, this doesn’t mean that HPS can only be used for flowering plants.
How many plants can a 1000 watt light cover?
The 400 and 1000 watt lights are the most useful. A 1000 watt grow light can light up an area of about 7 feet square when the light is suspended 2 feet above the plants . A 400 watt light would work for an area of about 4 feet square.
How much area does a 1000 Watt HPS cover?
1000-Watt HPS grow lights are the most powerful and cover a wider area of around 49 square feet .
How far should a 1000 watt HPS light be from plants?
The stronger the light, the further you’ll need to hang it, so if you have a 1000w you may want to hang it at least 15′′ (38cm) away. Depending on the strength of your light, you won’t want to go higher than 30 inches (76cm) above your plants.
How much can you yield off 1000 watts?
The yield from a single 1000w lamp is about 2 lbs per harvest . For me, sometimes 1.5 Lbs and sometimes 2.25Lbs max. Each strain has different yields.
How many plants can I grow with a 600w LED light?
2 month plants should give about 40g per plant, so with about 9 you’ll be able to easily fill a square meter and get up to 400g per 600w light. 3 month autoflowering plants grow much bigger, however, so you should only plant 4 per 600w light .
How many plants can you fit in a 4×4 tent?
In the ScrOG method, you can grow 2 plants in a 4×4 space. But if you try SOG, you can house 15-20 plants.
How many watts does a 1000 watt HPS light use?
| Metal Halide (MH) High Pressure Sodium (HPS) System Watts (approximate) | 250w HPS 295 watts | 400w HPS 460 watts | 750w HPS 840 watts | 1000w HPS 1100 watts |
|---|
What size grow tent for 1000 watt LED?
4′ x 4′ Grow Tent – Perfect for the footprint of a 1000w HID or LED grow light (4-6 plants)
How many amps does a 1000 watt grow light use?
Electrical Safety for the Indoor Growrooms
A 1000w HPS or Metal Halide light takes 9 amps at 120 volts so you can only run one on a wall outlet circuit. A standard dryer outlet is 220 volts and 30 amps so you can power up to six 1000 watt lights on that circuit.
How far should HPS light be from plants?
HPS lights should not be placed inches from the plants, as you would place fluorescent lights; you should set HPS lamps higher, generally between 5 and 8 feet from the plants. Whether you have a reflector with your HPS light makes a difference for how close you can keep it from the plants.
How many lumens does a 1000 watt HPS produce?
1000 Watt High Pressure Sodium bulbs provide incredibly high levels of light, outputting between 120,000 and 145,000 lumens .
Can you have too much light in a grow tent?
Cannabis plants will show a number of key signs when they’re getting too much light . The most obvious indicator is leaf burning. This typically causes yellow leaves at the top of the plant directly under the grow lights. While the inside veins stay green, the leaves take on a yellow, burnt look.
How do you know if a light is too close to a plant?
The first signs look like thin outlines on the outside of the leaves, so if you catch this quickly you will have a chance to avoid further damage. If some of the leaves start curling up , it might also be a sign that the plant is too close to the light. Good ventilation usually also helps with this issue.
Are LED grow lights better than HPS?
LEDs are much the same. Though they’re generally more efficient than HPS (with some clocking 2.8 μmol/joule), some LEDs are less efficient than high-quality HPS fixtures, and they give you less light.
Can you veg under HPS?
In response to the general question, can you use an HPS bulb for veg, the answer is yes .
Does more light equal more yield?
Light Intensity and Yields
The light intensity rule of thumb is that a 1% increase in light equals to a 1% percent increase in yield . In a study by Wageninen University, they discovered this to be true of all horticultural crops they evaluated including, fruiting (vine) crops and flowers.
Does wattage affect yield?
HPS Lights and CO2
If you’re using an HPS light, you should remember that more watts don’t necessarily lead to higher yields . Plants can only utilize that extra light if they are also supplied with extra carbon dioxide.
How many amps will one 1000 watt light pull on 240v?
How Many Amps Do You Need When You Have a 1000 Watt Ballast? Generally, most standard outlets have a capacity of 15 amps. When you plug a 1000 watt ballast in your 110 volts power supply, it draws nine amps .
How many plants can I grow under 1000W LED?
Yield Lab 1000W HPS+MH Cool Hood Reflector Grow Light Kit (Price: $239.95) — With a 1000w grow light, you’ll get 130,000 lumens from an HPS bulb and 110,000 lumens from an MH bulb. That’s sufficient to provide coverage for up to 6 plants .
What size tent do I need for 4 plants?
| # of plants Plant Density Size of Tent | 4 plants 0.75 plant/ sq. ft. 2’x2′ | 6 plants 0.75 plant/ sq. ft. 2’x4′ | 8 plants 0.75 plant/ sq. ft. 4’x3′ | 9 plants 0.75 plant/ sq. ft. 4’x3′ |
|---|
How many grow lights do I need for a 10×10 room?
| Grow Room Size Square Feet Recommended # of Plants in Veg | 6′ x 6′ 36 Up to 36 | 4′ x 8′ 32 Up to 32 | 8′ x 8′ 64 Up to 64 | 10′ x 10′ 100 Up to 100 |
|---|
How many plants 3×4 grow tent?
This size indoor grow room fits 4-6 plants from seed to flower. If you are wanting to use this a vegetative only tent, you can fit up to 10 smaller plants.
How many plants can I fit in my tent?
| Tent Guide | 200cm x 300cm 4 – 16 plants | 240cm x 240cm 4 – 16 plants | 360cm x 240cm 6 – 24 plants | 300cm x 300cm 6 – 24 plants |
|---|
How many plants 2×2 grow tent?
So, in your 2×2 grow tent you can grow 5-6 plants in this style. If you’re up for Pruning then you can grow only 1 plant in your grow tent. If you’re thinking about Low-stress training, then you can grow 4 plants/sq.
