Dry Air Typhoon : 3 amps x 115 volts = 345 watts per hour . 345 watts per hour x 24 hours = 8,280 watts per day.
How much does it cost to run an air mover?
345 watts per hour x 24 hours = 8,280 watts per day. 8.280 watts divided by 1,000 = 8.28 Kilowatts. 8.28 Kilowatts x local cost = Daily power cost (Note: the national average per kWh is approximately $0.1063) example using approximate average = 8.28 kw x $0.1063 = $0.88 cost per unit per day.
How many amps does an air mover use?
The unique 1/3 horsepower design of the Phoenix Centrifugal Air Mover coupled with a two-speed switch allows the restoration technician to deliver the most airflow using the fewest amps. Maximum amp draw on high speed is 2.8 amps . Minimum amp draw on low speed is a mere 2.4 amps.
Can you use an air mover as a fan?
There are several uses for an air mover. While similar to a fan, it is much more effective . It has the ability to start immediately at the desired speed and stop just fast. It can quickly remove unwanted fumes from a poorly ventilated workspace as well as keep it cool.
How long can you leave an air mover on?
Depending on the amount of moisture, allowing the system to operate for up to 30 minutes should help. Using air movers should be viewed as the second half of carpet extraction.
Do air movers cool?
Air movers can keep a large workspace cool . They could similarly keep a small room cool, but it is not necessary. A small fan would work just as well to keep a small area cool without using as much electricity.
Can you rent a dehumidifier?
A dehumidifier is a sophisticated piece of machinery that may sometimes come with a substantial price tag. A 50-pint unit can run in the range of $300 to $600, while larger capacity units can cost well into the thousands. On the flip side, it costs only 40 to 50 dollars a day to rent a large dehumidifier.
Is an air mover better than a fan?
Air movers, especially centrifugal ones , are much more precise than regular fans. Centrifugal air movers work directly over the area they are placed, and the air flow angle can be adjusted, making them excellent for quick drying carpet and floors. ... The airflow cannot be aimed as well either.
What is the difference between an air mover and a fan?
Axial fans are larger, box-like machines. They work over a broad area, making them effective at drying larger rooms. Air Movers work at very high speeds . They can be set to a few different angles, so they can be directed toward the floor, aimed at furniture or faced up some to dry higher spots on walls.
Which is better in cooler fan or blower?
Airflow: ... But blowers create high pressure airflow from the cooling system with higher speed and air throw. Hence fan type coolers are ideal for entire room cooling whereas blower types are good for instant cooling in a specific area.
What size air mover do I need?
The flooring in the space where you're working will also impact the number of air movers you need. Here are some guidelines: Non-porous and semi-porous flooring: At least one air mover per 400 to 500 square feet . Direct-glue carpet installations: At least one air mover per 300 square feet of carpet area.
How do you use an air mover?
Aim the air mover in the direction of the water and turn it on. Be sure to use a commercial dehumidifier to absorb the extra moisture, otherwise, it will resettle after you turn off the air mover. If needed, change the angle of the airflow or change the position the air mover to dry other areas.
How long can you run a carpet blower?
Depending on the level of water damage, typically a carpet drying fan is used for 2-6 days and sometimes more when there is a large area to be dried.
Are air movers worth it?
Air movers are known to be excellent tools for cleaning, drying and ventilating . ... This tool is not limited for use by professionals alone, but homeowners can also use this for immediately drying newly-painted rooms, cleaning hard to reach areas and drying newly-washed carpets.
Do fans push or pull better?
A Push configuration is more efficient in cooling when its blowing cool(er) air from outside the plenum through a radiator. A Push also makes your build louder. In Pull configuration the fan or fans are drawing an air stream out of the radiator.
What is better than a fan?
While an air cooler is more effective in terms of cooling, whether you opt for one will come down to your budget and your needs. If your budget is small, and you don't mind the cooling focus being fixed, or in rotation range, a fan is your best bet. If you have a bit more to spend, an air cooler may be the way to go.
