| Materials Price Per Square Foot Cost Per 100 Square Feet (with labor) | Rock Base $0.65 $95 | Crushed Stone/ Limestone $2 $230 | Rock Pebbles $1.50 $180 |
|---|
What is the cost of gravel per ton?
Cost of Driveway Gravel
The per-ton price can range from $35 for standard gravel to $230 or more for limestone , pebblestone or other materials.
How much is aggregate per ton?
| Rock Type Per Foot Per Ton | Crushed & Recycled Asphalt $0.52 – $1.85 $10 – $27 | Aggregate & Drainage Rock $1.00 – $3.00 $25 – $50 | Stone Dust or Screenings $1.00 – $5.00 $30 – $145 | Caliche or Arizona Gravel $1.17 – $6.62 $45 – $253 |
|---|
How much is a ton of 57 gravel?
#57 Granite Gravel— $56 per ton . Description: Typical construction, driveway, and drainage gravel. This gray granite gravel ranges from .
How much does it cost to put in a gravel driveway?
The average cost to put in a gravel driveway is between $1,500 and $6,000 , or about $2 to $5 per square foot for materials and installation.
Is asphalt cheaper than gravel?
Economical option. Homeowners appreciate the sleek appearance of an asphalt-paved driveway at a lower cost than concrete or paver surfaces. Asphalt driveways typically cost $2 – $5 per sq foot to install – more than gravel , but much less than many other options. ...
Is Exposed aggregate more expensive?
Explanation: Exposed aggregate is more expensive than standard aggregate because it requires more material expense and labor expense. ... Explanation: A standard poured driveway with no colorings, stains or aggregates can be as low as $4 per square foot in some cases.
How many yards are in a ton?
Regarding this, “how many yards in a ton?”, generally for estimating purpose 1 yard of gravel weighs around 3000 pounds and 1 US ton = 2000 pounds, so yards in a ton = 2000/3000 = 0.66 cubic yards , therefore, there are 0.66 yards in a ton.
How many ton of gravel do I need?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
What is the best size gravel for a driveway?
A commonly used gravel size for driveway base layers is #3 gravel . This rock is generally 1-2 inches in diameter and does double duty by establishing a solid, reliable foundation and providing adequate drainage; both critical factors in driveway construction.
How much is a ton of 57 rock?
In Northern Virginia, you can expect to pay somewhere between $40 and $65 per ton for this type of rock depending on the size of the order.
What is #2 gravel?
This primarily 1′′ crushed, washed gravel with a top size of 1-1/2′′ is often used for drainage around perforated pipe, under concrete slabs, and as a coarse driveway topping for soft, very muddy driveways.
Why is it called 57 stone?
A crusher breaks down the rock into various sizes. Crushed stone varies in size. The number “57” is a number that refers to the size sieve that was used to screen and sort the stone . It means that the stone was put through the #57 sieve which produces gravel stones of about 1” to 1.5” in size.
How much does 2 tons of gravel cover?
Understanding Size and Coverage
Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton ; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.
Is gravel cheaper than concrete?
Gravel is a whole lot cheaper than a concrete , asphalt, or other paved surface. It can cost less than 1/2 of paved driveways. Even though you will have to maintain the gravel, it is inexpensive to do so.
What is the cheapest gravel for driveways?
Cheapest gravel for driveways. The cheapest gravel for driveways is crusher run, crushed shells, crushed concrete, slate chips, recycled asphalt, and pea gravel , which all cost $15 to $30 per yard, or less than $1 per square foot when purchased in bulk from a quarry.
