How Much To Repair Rear Axel 2003 Mazda Protoge?

by | Last updated on January 24, 2024

, , , ,
Car 2003 Mazda ProtegeL4-2.0L Turbo Service Service typeAxle / CV Shaft Assembly – Passenger Side Front Replacement Estimate Estimate$400.81 Shop/Dealer Price Shop/Dealer Price $476.64 – $674.88

How much is a rear axle repair?

Rear Axle Repair Costs

The cost of parts to repair an axle make up the majority of the cost and run from about $430 to $480 dollars . Labor on a rear axle repair is usually around $50 to $70.

How much does it cost to replace worn axles?

CV Axle Replacement Expenses

Replacement axle shafts can be bought for between $60-150.00 each , and labor is generally between 1.5-3 hours to replace, bringing labor to around $150-350.00.

Is an axle expensive to fix?

The cost of fixing a car axle depends on the type of car you drive as well as whether you need to repair the front or rear axle. Most drivers find they need to spend anywhere between $450 and $750 on this essential service.

Can a rear axle be repaired?

Q : Is a broken axle repairable? In most cases, replacement is the best way to fix a bent or broken axle . Patching up an axle crack or break is too risky, as it can fail while you’re driving.

How much does a axle cost?

The average cost for axle shaft replacement is between $740 and $823 . Labor costs are estimated between $159 and $200 while parts are priced between $581 and $623. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

Is a car totaled if the axle is bent?

In most cases, insurance companies will categorize a broken axle as “serious damage” that is already enough to declare the car totaled . There are some instances where a broken axle can still be repaired, but most insurance companies would rather declare it a total wreck instead.

How do I know if my axle is broken?

  1. Leaking.
  2. Brake Pad Misalignment. ...
  3. Wheel Wobbling & Vibrations. ...
  4. 4. “ ...
  5. Vehicle Strains. Car axles are fairly resilient, but when they’re under pressure, you’ll feel it in the gas pedal. ...
  6. Car Won’t Budge. The most obvious sign of a broken axle is when your car tires won’t rotate. ...

How long does it take to fix an axle?

On the 2006 Navigator, if a professional mechanic is replacing the axle(s), it is assumed to take about 1 hour to replace one axle (i.e., one side) whether it is the rear axle or the front axle.

What causes a broken axle?

Even though axles are built to be tough, an overloaded vehicle can sometimes crack or break an axle. Bad carrier bearings or bad potholes are other common causes of axle problems.

Can you drive a car if the axle is broken?

You cannot drive a car with a broken axle . Doing so will cause steering instability and can result in a car accident. There are two axles in a car located on its front that establish a connection between the car and its wheels.

What causes a bent axle?

This can occur during an auto accident, running over a curb, or even hitting a particularly deep pothole at higher speeds . The result is a bent axle.

How long can you drive with a broken axle?

How long can you drive on a broken axle? Using bad CV axles, you can drive your vehicle for approximately five months . However, if you live in a dry, snowless environment free of dirt or rain, you might be able to drive your automobile for six months.

Can a broken axle mess up your transmission?

The answer is yes, it absolutely can . If the CV axle breaks and leaves the driveshaft off-center in the differential, then power will not be transmitted to your wheels properly. A broken CV axle could mess up your vehicle’s transmission and this is why it is important to get it repaired as soon as possible.

Can a bent axle be fixed?

It really depends on the severity of the damage. In some cases, the cost to repair a severely damaged axle may not be cost effective, however, many axle shops lacking the ability to fix a bent axle, will simply have you replace it .

How do I know if my rear axle is bad?

  1. Vibrations. A bad differential can cause vibrations that increase in intensity as you speed up and reduce as you slow down. ...
  2. Grinding Gears. Grinding gears is another significant sign that your differential is failing and that the gears are wearing themselves out. ...
  3. Whining Noises.

How do I know if I need a new axle?

  • Loud clunking noises. ...
  • Grease leaking from underneath the vehicle. ...
  • Malfunctioning brakes or inability to accelerate. ...
  • Vehicle tyre misalignment.

What happens when axle breaks?

Broken axles don’t happen in an instant, and you’ll usually notice the warning signs early on, including: Loud clanking or clicking noises . Your car will pull to one side. Oil leaking from the CV joint.

Can you replace an axle on a car?

If a car axle is bad, it should be replaced and not repaired . If only part of the axle is damaged, such as the CV boot, it can be replaced without replacing the rest of the axle. You do not need to replace both sides if only one is bad. The cost to replace a CV axle is around $150 to $450.

How do you know if your axle shaft is bent?

Shaft/axle wobble and vibration – When your vehicle has a bent or broken axle shaft, one of the clearest ways you’ll notice is how at lower speeds the car might seem to wobble . At higher speeds (over 20 mph), the wobble may turn into what feels more like a general vibration.

How does a broken axle sound like?

Clunking Noise

If the axle is the issue, the clunking sound you hear indicates your automobile’s inability to transfer the power and torque from the engine and transmission to the wheels to get them moving. It might be that the power/torque transfer stops at the broken axle.

Can you break an axle by hitting a curb?

Hitting a curb hard enough can shift your axle and wheel shaft into the transmission . Even a slight jolt to the case can do harm. If you run over a curb and scrape the bottom of your car, it can even disconnect linkages and cables from the transmission case housing itself.

David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.