How To Repair Apc-Index-Mismatch Window 8.1?

1. Solution 1: Install the Latest Updates.
2. Solution 2: Check System Files with System File Checker.
3. Solution 3: Update the Driver or Reinstall the Driver.
4. Solution 4: Disable Realtek HD Audio Manager from Starting.
5. Solution 5: Reset or Reinstall Windows.

What causes APC index mismatch?

A common cause for the APC Index Mismatch blue screen error is outdated or corrupted audio drivers , especially for Realtek components. You can easily fix it by downloading and installing the latest compatible drivers for your system.

What does stop code APC index mismatch mean?

As an APC Index Mismatch BSOD is usually caused by a faulty driver , a good way to resolve the issue is to check your PC for new updates. You can check for new drivers through the Windows Update system. While you’re there, it’s a good idea to install any new system updates to fix bugs and improve your system stability.

How do I fix APCindexmismatch on Windows 8?

– Boot into Safe Mode by repeatedly tapping the F8 key during boot-up. – Once in Safe Mode – Start > Search > type “cmd” without the quotes. – To turn off Driver Verifier, type in cmd “verifier /reset” without the quotes. – Restart and boot into normal Windows.

What does DPC_Watchdog_Violation mean?

DPC Watchdog Violation (error code: DPC_Watchdog_Violation) is a common issue in the Windows operating system. It’s occurred due to some specific reasons, like unsupported SSD firmware, old SSD driver version, hardware incompatibility issues, or system files are corrupted .

What critical process died?

What is Critical Process Died? Critical Process Died blue screen of death, with the error code 0x000000EF, means that a critical system process is your computer died . The process can be so critical that it could damage your hard disk, your memory or, even very rare, your processor.

How do I fix Windows stop code APCindexmismatch?

1. Install latest Windows Updates.
2. Update driver automatically to fix APC_INDEX_MISMATCH BSOD.
3. Update device drivers via Device manager.
4. Check for system file issues.
5. Remove the DisplayLink driver to fix APC_INDEX_MISMATCH BSOD.
6. Disable Realtek HD Audio Manager.

How do I fix Windows stop in code memory management?

1. Restart Your Computer. Have you tried switching your computer off and turning it back on again? ...
2. Update Windows 10. ...
3. Run Windows 10 Memory Diagnostic Tool.
4. Run MemTest86. ...
5. Update Your Drivers. ...
6. Update Your GPU Drivers. ...
7. Run CHKDSK. ...
8. Run SFC.

How do I fix uncorrectable blue screen Whea?

1. Get all the latest updates with Windows Update. Go to Start > Settings > Windows Update , and then select Check for updates.
2. Try restoring Windows back to an earlier point in time.

How do I fix Ntkrnlmp EXE?

1. Update your graphics card driver.
2. Disable C-states and EIST in BIOS.
3. Repair corrupt system files.
4. Check for virus and malware.
5. Configure Driver Verifier Manager.

What is Windows Stopcode?

When Windows crashes, it generates a stop code that it displays on the BSOD. The stop code is a hexadecimal code that starts with 0x, followed by a string of eight other characters . Each stop code refers to a unique Windows error and directs you to help to fix the error.

What is memory management error?

As the name suggests, the memory management error relates to the computer’s memory, which can be a physical problem with the installed RAM . The Windows Memory Diagnostic Tool can help discover if this is the root of the problem. When Windows restarts, it will tell you if something is wrong with your memory.

How do I fix DPC watchdog violation Windows 8?

1. Remove All Connected External Devices.
2. Update Firmware Of Your Solid State Drive.
3. Check Corrupted System Files On Your Windows.
4. Scan And Fix System Files.
5. Use BlueScreenView To Find Out The Cause.
6. Restore Your Windows System To Fix DPC_Watchdog_Violation Error.

Can RAM cause DPC watchdog violation?

The Blue screen problem DPC WATCHDOG VIOLATION may caused for several reasons e.g. faulty device or software drivers, damaged RAM or Disk drive, etc.

How do I fix watchdog violation?

1. Remove all external devices on your computer.
2. Change SATA AHCI controller.
3. Update the SSD firmware.
4. Check and fix disk errors with CHKDSK.
5. Remove newly installed software.
6. Scan and fix system files.
7. Run Event Viewer.

How do I fix Windows critical process died?

1. Run the Hardware and Device Troubleshooting Tool. ...
2. Run the Deployment Imaging and Servicing Management Tool. ...
3. Run the System File Checker. ...
4. Run an Antivirus Scan. ...
5. Update Your Drivers. ...
6. Uninstall Recent Windows Updates. ...
7. Perform a Clean Boot. ...
8. Restore Your System.

Is critical process died fixable?

Critical Process Died FAQ

It is easy to fix the “critical process died” stop code in Windows 10 and the solutions are various, such as run an SFC scan, update your drivers, perform a clean boot, go for system restore, uninstall the latest software, check disk errors, etc.

How do I fix critical process died boot loop?

1. #1) System Restore. How To Create System Restore Point. ...
2. #2) Run SFC Scan.
3. #3) Run Full System Antivirus Scan.
4. #4) Update Drivers.
5. #5) Safe Mode.
6. #6) Clean Boot.
7. #7) Run Hardware And Device Troubleshooting Tool.
8. #8) Run DISM To Fix System Image.

What failed FltMgr Sys?

The FltMgr. sys file error typically occurs whenever Windows fails to process or read files that are kept on hard drivers , due to the fact that your system’s FltMgr is either damaged or corrupted. When things like this happen, your hard drive will stall and the blue screen error will come up.

How do I use the blue screen troubleshooter?

In Windows 10 you can access the Blue Screen Troubleshooter via Settings > Update & Security > Troubleshoot . Run it and see if it can fix your problem.

What causes memory management stop code?

It is possible that the computer has outdated hardware drivers, or a rogue or faulty hardware driver is causing the MEMORY_MANAGEMENT stop code. Check for drivers that need to update, or update all hardware drivers at once.

How long does RAM last for?

How Long Does RAM Physically Last? According to Sr. principal engineer at DELL EMC, Mark Farley, if your RAM lasts for the initial 6 months of operation, it will last for the next 20 years and more . After this time frame, the silicon will begin to degrade.

How do I know if my RAM is faulty?

1. Search for “Windows Memory Diagnostic” in your start menu, and run the application. ...
2. Select “Restart now and check for problems.” Windows will automatically restart, run the test and reboot back into Windows. ...
3. Once restarted, wait for the result message.