As mentioned at the beginning of the article, the numbers on a drill represent the amount of torque the tool can apply to an object (such as a screw) or for hole drilling. The numbers usually range from 1 to 20 (or more) with 1 representing the least amount of torque and 20, the greatest.
What are the 3 settings on a drill?
Every drill in this category has three mode settings: hammer, drill, and drive . The differences are simple and help to ensure that the drill operates at peak performance for a given application.
What are the different settings on a drill?
The adjustable gearing provides versatility based on the task you will be performing. Setting 1 is low speed/high torque and is best for driving screws. Setting 2 is a medium speed/torque and can be used for drilling or driving. Setting 3 is the highest speed and is meant for drilling or driving fasteners.
What are the 2 settings on a drill?
When a drill has 2 speed settings, the RPM is indicated twice as well; once for the lower gear (low RPM) and once for the higher gear (high RPM) .
What setting should my drill be on to drill a hole?
Setting 1 is low speed and high torque, which is ideal for uses such as driving screws into the material. Setting 2 is high speed and low torque, which is good for drilling holes.
What is a clutch setting on a drill?
The drill's clutch gives a user more control over the amount of torque applied to a screw to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. The clutch automatically disengages the bit from the motor when the torque on the bit exceeds a preset value.
What are the numbers on top of a drill?
The numbers on a drill driver refer to the amount of torque the drill will apply to a fastener (usually a screw) and once that torque setting is reached, the drill will stop turning/driving the fastener.
What is the 1 and 2 setting on a drill?
The adjustable gearing provides versatility based on the task you will be performing. Setting 1 is low speed/high torque and is best for driving screws. Setting 2 is a medium speed/torque and can be used for drilling or driving. Setting 3 is the highest speed and is meant for drilling or driving fasteners.
Do corded drills have a clutch?
Corded drills do not have adjustable clutches . Instead, a pressure-sensitive trigger adjusts the speed.
What does drill capacity mean?
Drilling capacity is not the depth of the hole that can be drilled, but the maximum diameter of drill bit that can be used . It's always worth checking that drill bits are compatible with the drill you are using.
What is a good torque for a drill?
Newton Metres (Nm) on drills:
4 to 15Nm is fine for all of those smaller screw driver tasks around the home. 15 to 35Nm is a great all-rounder to drill and drive medium sizes screws and hole drilling. 35Nm upward will tackle all of those more serious project with bigger screws and holes.
How do I know if my drill has a safety clutch?
The size of the bit and the wattage of the drill will determine how you get on. The better drills will have a safety clutch for when (not if) the bit snags and tries to spit you off the ladder.
How do you drill wood without splinters?
You can drill a hole in wood without splintering by using sharp and well-maintained drill bits , drilling a hole at higher speeds, avoiding putting pressure on the drill & letting the bit find its way through the wood. To avoid wood splintering, use another wooden board at the bottom that you let drill in.
Why is my drill not making a hole?
The most common reason a drill won't penetrate a wall at all is because the drill is spinning in the wrong direction . If the drill bit enters the wall and then hits resistance, the typical cause is a metal plate or masonry obstruction.
