“Lockout/tag out” refers to specific practices and procedures to safe- guard workers from the unexpected energization or startup of machinery and equipment , or the release of hazardous energy during service or maintenance activities.
What does the term lockout/tagout refer to quizlet?
Group Lockout/Tagout. refers to a leader locking/tagging out for workers under his or her immediate control on the same work crew. Hazardous Energy Sources. Electrical, mechanical, hydraulic, pneumatic, and chemical. Lockout.
What does the term lockout/tagout refer to OSHA?
The OSHA standard for The Control of Hazardous Energy (Lockout/Tagout), Title 29 Code of Federal Regulations (CFR) Part 1910.147, addresses the practices and procedures necessary to disable machinery or equipment, thereby preventing the release of hazardous energy while employees perform servicing and maintenance ...
What is a lockout/tagout used for?
To protect one or more circuit breakers in an electrical panel , a lockout–tagout device called the Panel Lockout can be used. It keeps the panel door locked and prevents the panel cover from being removed. The circuit breakers remain in the off position while electrical work is done.
What is another name for lockout tagout?
Proper lockout/tagout ( LOTO ) practices and procedures safeguard workers from hazardous energy releases. OSHA’s Lockout/Tagout Fact Sheet describes the practices and procedures necessary to disable machinery or equipment to prevent hazardous energy release.
When you come across a tag or lock on a switch?
In general, the following procedures are used: Electrical energy – Switch electrical disconnects to the off position. Visually verify that the breaker connections are in the off position. Lock the disconnects into the off position .
What is OSHA’s Lockout/Tagout standard is designed to prevent?
l47), which is more commonly known as the Lockout/Tagout Standard, is a Federal Occupational Safety and Health Administration (OSHA) program, It is designed to prevent the unexpected startup, or energizing, of machinery and equipment during service and maintenance operations which could cause injury to employees .
What is the purpose of LOTO?
The purpose of LOTO is to prevent injury to servicing and /or maintenance employees due to the unexpected energization or startup of machines, equipment or processes; or the release of stored energy.
What is the meaning of LOTO?
Answer — LOTO ( Lock Out Tag Out ) is the physical restraint of all hazardous energy sources that supply power to a piece of equipment, machinery or system. LOTO also includes applying a Warning Tag on the physical restraint device.
What are the exceptions to the lockout/tagout requirements?
- Continuity of service is essential;
- Shutdown of the system is impractical;
- Documented procedures are followed; and.
- Special equipment is used which provides effective employee protection.
What are the steps of lockout tagout?
Shut Down – Power down the machine or equipment. Inform employees that will be affected by the shutdown of the equipment. Isolation – Make sure all sources of energy have been isolated. Turn off power, close valves, block moving parts, or disengage and block lines, etc.
Who should remove a lockout tagout?
The Lockout Tagout devices are finally removed from an energy isolating device, only by the worker who applied it. The removal of employees lock without his knowledge can be dangerous, as a general rule, the Lockout Tagout device should be removed by the employee himself/herself . 5.
When should lockout/tagout procedures be used?
The term “lockout tagout” refers specifically to procedures used to ensure that equipment is shut down and inoperable until maintenance or repair work is completed . They are used to keep employees safe from equipment or machinery that could injure or kill them if not managed correctly.
What is the difference between lockout and tagout in industries?
Lockout means to place a lock on a device that prevents energy release. Tagout means to place a tag on a switch or other shut off device that warns not to start that piece of equipment.
How do you implement a LOTO system?
- 1: Evaluate and Plan. ...
- 2: Equipment Appraisal. ...
- 3: Machine Specific Procedures. ...
- 4: Assessment of isolation devices. ...
- 5: Procedure awareness & Training. ...
- 6: Implementation. ...
- 7: Review your program regularly.
What is LOTO training?
Lockout/Tagout, aka LOTO, is one of those safety terms that gets thrown around a lot. ... A LOTO program addresses the steps necessary to disable machinery or equipment that could release hazardous energy or start unexpectedly during servicing or maintenance activities.
