Pommel : the front of the saddle, which is raised higher than the seat both to provide security for the rider and to give the horse’s withers clearance. Cantle: the back of the saddle, which is raised higher than the seat to give security.
What are the parts of the English saddle?
Cantle : The back of the saddle that gently curves upwards for backward seat support. Twist: The “twist” is the part of the saddle tree that sits just below the pommel in front of the “seat” of the saddle (circled in the image). This is a part of the saddle that determines how the saddle sits between the rider’s legs.
What is the front part of a saddle called?
Swell {swel} : n. The front of the saddle tree that holds the two bars together and provides a base for the horn. Also known as the saddle fork or pommel . The saddle swell or fork (or, if you’re English, pommel) is the part of the saddle that holds together the bars of the tree.
What are the names of the parts of a saddle?
Saddles can be broken up into three areas: the pommel, the seat, and the cantle . Think of these simply as the front, middle, and back of the saddle.
Where is the panel on an English saddle?
Gusseted panel: The panel has a wedge-shaped piece sewn in under the rear half of the saddle , from the rear of the flap back.
What is the front of a western saddle called?
A pommel is the rounded knob on a horse’s saddle that a rider grips with one hand. The raised front of the saddle itself can also be called a pommel. Some saddles, particularly the modern western type, have a metal grip at the front, known either as a horn or a pommel .
Can you jump in a dressage saddle?
You simply will not have the necessary support in a dressage saddle to work with the horse over a jump; you simply will not be able to do proper dressage in a close contact jumping saddle which does not allow the rider to sit properly balanced with a shoulder-hip-heel straight line.
What is a Latigo strap?
Latigo, a strap used on a Western saddle to connect the cinches to the rigging .
What is treeless saddle?
A treeless saddle is simply a saddle without a tree . ... The tree is made so it conforms to the horse’s back and the rider’s seat. Traditionally, saddle trees were made of wood but today, they can be made of materials such as fiberglass combined with metal, plastic and many still, have some wood in their construction.
What is a slick fork?
The term “slick fork” classifies a fork that is widest at the bottom where the fork connects to the bars . (A fork that goes wider and then comes in to meet the bars is a swell fork.) It can be any “width” within that limit with narrower forks being called “slicker” than wider ones.
Do Western saddles have girths?
Western cinches are typically sized in 2-inch increments, between 26 and 34 inches . To measure, place an unrigged saddle on your horse’s back. With the help of a friend, place a soft measuring tape beneath the girth area to measure between the saddle’s dee rings.
What is a cinch on a saddle?
A girth, sometimes called a cinch (Western riding), is a piece of equipment used to keep the saddle in place on a horse or other animal . It passes under the barrel of the equine, usually attached to the saddle on both sides by two or three leather straps called billets.
What are the different parts of a western saddle?
- Fenders: Fenders are multifunctional wide leather pieces. ...
- Stirrups: Stirrups attach to the bottom of a saddle’s fenders. ...
- Strings: They are strips of leather hanging by the saddle’s sides and attached to the pommel and the back.
How long do foam panels last?
Whether it is class A fire rated or not, the foam has a shelf life. About 7 years after acoustic foam panels are produced, the foam will begin to flake out and sprinkle dust particles into the air.
Are English saddles bad for horses?
Summary. Saddles aren’t bad for horses and are essential to use when riding horses. An adequately fit saddle distributes a riders’ weight, making carry a passenger more comfortable than without one.
What is a drop panel saddle?
A drop panel (DP) is another way of adding more depth into a panel but instead of the front like a front gusset it sits underneath the saddle directly onto the horse. Drop panels are great when your horse is naturally higher withered with atrophy or just quite angular built.
