The red is for 16-inch-on-center spacing . The common framing spacing is for wall studs, floor joists and roof rafters. There will be red marks on the tape measure if you decide to space frame at 24 inch centers.
What is Diamond on measuring tape for?
The black diamonds on the tape measure represent that spacing . The first black diamond is at 19.2 inches” and after that black diamonds appear at 38.4, 57.6, 76.8, and 96 inches or 8 feet. That is one less stud for every 8 feet of wall, counting the beginning and end studs.
What is the little dot on a tape measure mean?
Many tape measures add red numbers (or some other graphical standout) every 16-inches, a very common spacing for studs in house framing. ... The black diamonds on the tape measure represent that spacing . The first black diamond is at 19.2” and after that black diamonds appear at 38.4”, 57.6”, 76.8” and 96”, or 8-feet.
Why are there 16 inches on a tape measure?
Tape measures usually have a red mark every 16 inches. This makes it convenient to mark off wall studs or joists , which typically are 16 inches apart.
What are the Red Arrows on a tape measure?
Arrows or Stud
Every 16 inches , you may see a double arrow, a number marked in red, or the word “STUD.” This helps you locate every stud that may run across a wall once you've located the first one.
What is the tape measure trick?
Instead of just scribing a short mark, hold the tape measure against the open edge of material with your index finger and press lightly down on the hook . As you move across the material, the hook will scribe a cut line. This provides the ease of a scribing tool and the accuracy of a marking gauge.
What is the 8 foot rule?
It's called the 8-foot rule. A leader at a manufacturing facility recently gave the direction to his leadership team to engage with their employees every time they come within eight feet of one of their employees . It's a simple rule that is simply brilliant!
What do the marks on a ruler mean?
Rulers are etched with markings that denote the measurement of distance . Every inch of a 12-inch ruler is marked out, and between each inch, every 1/8 of an inch or 1/16 of an inch is marked. Likewise, a ruler of a similar length measuring centimeters will have each of 30 centimeters marked out.
How many parts is an inch divided into on a standard tape measure?
An inch is divided into 2 equal halves . a unit are to be taken (also Funk & Wagnalls Std. Dictionary). In 1⁄2”, the numerator is 1.
What is the meaning of pull push rule?
A push pull rule is a measuring tape that coils into a compact case . It is used for measuring long, short, straight lengths.
Why does a tape measure have a diamond at 19 3 16?
The black diamonds which appear every 19 3/16” on metal tape measures are for spacing I-beam “timbers .” Several wood-product manufacturers offer I-beam “timbers” as a substitute for solid lumber floor joists. The diamond marks on tape rule blades are for spacing these engineered floor joists in new construction.
What comes after 3 4 on a tape measure?
Here they are: 1/16 , 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and the inch mark.
What is 7/8 as a decimal?
Answer: 7/8 is expressed as 0.875 in its decimal form.
What is the distance between the little black diamonds?
The black diamond marker on a tape measure falls between the 16-inch and 24-inch spacing . This marker is commonly used in building a concrete block chimney. But, it has other uses too. Marked at 19.2 inches apart, using this type of placement also allows for more weight loads with fewer pieces of wood.
How does tape measure retract?
When the tape is pulled, the spring inside the casing is extended. Pulling out the end of the tape measure further causes the spring inside the casing to extend. When the user releases the end of the tape measure , it retracts into the unit, and the spring returns to its original position.
