ALE (Address Enable Latch) is the control signal which is nothing but a positive going pulse generated when a new operation is started by microprocessor. So when pulse goes high means ALE=1, it makes address bus enable and when ALE=0, means low pulse makes data bus enable.
What is the use of pins in microprocessor?
The pins on a CPU chip are used as input and outputs to the CPU . We say that a signal is “asserted” if the CPU is requesting the operation that is conveyed by the signal. To assert a request, the manufacturer of the CPU can choose either the value 0 or the value 1 for that signal.
What is the use of ALE pin in 8085?
ALE (Address Enable Latch) is the control signal which is nothing but a positive going pulse generated when a new operation is started by microprocessor. So when pulse goes high means ALE=1, it makes address bus enable and when ALE=0, means low pulse makes data bus enable.
What is ale microprocessor?
ALE stands for Address Latch Enable . Functions:- 1) Address line and data line in the architecture are low and multiplexed in order to get the address we use ALE that take the address from the line.ALE control signal to de-multiplexed the lower order address and data bus.
What is function of AD0 AD7 pins?
AD0-AD7 constitutes the Address/Data bus . They are time multiplexed. These pins are used for least significant bits of address bus in the first machine clock cycle and used as data bus for second and third clock cycle.
Which pin of 8085 is multiplexed?
Pins 12 to 19 of 8085 are AD0 – AD7 which is the multiplexed address-data bus. Multiplexing is done to reduce the number of pins of 8085.
How many pins are there in 8085 microprocessor?
| General information | Predecessor Intel 8080 | Successor Intel 8086 |
|---|
What is purpose of Sid and sod?
Ans: SID (Serial input data line): It is an input line through which the microprocessor accepts serial data . SOD (Serial output data line): It is an output line through which the microprocessor sends output serial data.
What is the use of test pin in 8086?
| A17/S4 A16/S3 Function | 1 1 Data segment access |
|---|
Which is used to connect more microprocessor?
| Q. The _______ is used to connect more microprocessor | B. cascade | C. i/o devices | D. control unit | Answer» b. cascade |
|---|
What is the difference between microprocessor and microcontroller?
Microprocessor consists of only a Central Processing Unit, whereas Micro Controller contains a CPU, Memory, I/O all integrated into one chip. ... The microprocessor uses an external bus to interface to RAM, ROM, and other peripherals, on the other hand, Microcontroller uses an internal controlling bus .
What is the full form of ale?
| Definition : Address Latch Enable | Category : Academic & Science » Electronics | Country/ Region : Worldwide | Popularity : | Type : Initialism |
|---|
What are the 2 modes of 8086?
8086 is designed to operate in two modes, i.e., Minimum and Maximum mode .
What is the use of S0 and S1 pins?
Status signals(S0 and S1):
These are output status signals used to give information of operation performed by microprocessor . The S0 and S1 lines specify 4 different conditions of 8085 machine cycles.
Why the microprocessor pins are multiplexed?
The main reason of multiplexing address and data bus is to reduce the number of pins for address and data and dedicate those pins for other several functions of microprocessor . These multiplexed set of lines used to carry the lower order 8 bit address as well as data bus.
What is the function of IO M?
IO/M` stands for ‘input-output/memory`’. When IO/M` is logic 0, it means that the address sent out by the processor is for addressing a memory location . When IO/M` is logic 1, it means that the address sent out by the processor is for addressing an I/O port.
