Before using a fire extinguisher, make sure the fire is contained and is not spreading around the area . It is also important to make sure the room has not filled with smoke before using an extinguisher. You should also make sure everyone is evacuated from the building in case the fire spreads.
What are the three things you need to consider before using a fire extinguisher?
- #1 The Size Of The Fire.
- #2 The Location of The Fire.
- #3 What Is Burning.
- #4 The Condition Of Your Fire Extinguisher.
Which of the following conditions must be met before using a fire extinguisher to put out a fire?
For a fire extinguisher to be effective, the following conditions must be met: • The extinguisher must be right for the type of fire; • It must be located where it can be easily reached; • It must be in good working order; • The fire must be discovered while it is still small; • The person using the extinguisher must ...
Which of the following conditions must be met for a fire to occur?
A fire needs three elements – heat, oxygen and fuel . Without heat, oxygen and fuel a fire will not start or spread. A key strategy to prevent fire is to remove one or more of heat, oxygen or fuel.
Why must fire extinguishers be routinely maintained?
Fire extinguishers must be routinely maintained if they are to remain effective . There are several types of electrical hazards, all of which can cause injury or death. For this reason, you need to be aware of the dangers involved with working around electricity.
When using a fire extinguisher you should aim at?
Aim at the base of the fire . If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good. You want to hit the fuel. Squeeze the top handle or lever.
Who is responsible for using a fire extinguisher?
Every employer, owner or occupier of a business premises is accountable for fire safety and fire protection. To comply with fire safety legislation, it is a legal requirement to have an ‘appropriate person’ who is trained to carry out fire safety measures.
What is needed to start a fire?
Oxygen, heat, and fuel are frequently referred to as the “fire triangle.” Add in the fourth element, the chemical reaction, and you actually have a fire “tetrahedron.” The important thing to remember is: take any of these four things away, and you will not have a fire or the fire will be extinguished.
What are the three things needed for combustion to occur what will happen if one of these is not present?
There are three components needed to start a fire: fuel, oxygen, and heat . This is commonly referred to as the fire triangle. If any one of the components is missing, a fire cannot occur.
What is the OSHA standard for fire extinguishers?
A fire extinguisher, rated not less than 2A, shall be provided for each 3,000 square feet of the protected building area , or major fraction thereof. Travel distance from any point of the protected area to the nearest fire extinguisher shall not exceed 100 feet.
Which elements do you think need to go in a fire prevention plan OSHA?
At a minimum, your fire prevention plan must include: A list of all major fire hazards, proper handling and storage procedures for hazardous materials, potential ignition sources and their control , and the type of fire protection equipment necessary to control each major hazard.
When using a fire extinguisher to put out a fire you should sweep at the?
SWEEP from side to side, moving carefully toward the fire. Keep the extinguisher aimed at the base of the fire , sweeping back and forth until all the flames are out.
Which elements do you think need to go in a fire prevention plan OSHA quizlet?
Which elements need to go in a fire protection plan? A fire prevention plan must be in writing, kept in the workplace, and be made available to employees for review.
Where should you aim the fire extinguisher nozzle when putting out a fire?
- Aim: Aim the nozzle of the fire extinguisher low at the base of the fire.
- Squeeze: Squeeze the trigger you just pulled the pin out of. Remember to squeeze it slowly and evenly, so it is as effective as possible.
- Swipe: Swipe from side to side to cover all areas the fire may have spread to.
Where should you aim the fire extinguisher nozzle?
You should aim the nozzle, hose or horn (on a CO2) at the base of any fire because this is where the fuel is, and this is the part you need to extinguish to stop the fire from continuing. If you simply aim at the flames you will not stop the fire permanently and your extinguisher will be empty before the fire is out.
Does a fire extinguisher need to be mounted?
Fire extinguishers need to be mounted to the wall so that they are secure, visible, and readily accessible. It is also important to mount them in such a way that they cannot be easily moved or damaged.
What is pass fire extinguisher?
The ‘PASS’ system stands for Pull, Aim, Squeeze and Sweep . It describes the stages in which a fire extinguisher should be operated and explains what each stage entails, giving enough information for the operator to use the extinguisher safely.
What are the three essential requirements for combustion Class 8?
- Presence of combustible substance.
- Presence of supporter of combustion.
- Heating the combustible substance to its ignition temperature.
How do you start a fire with fire starters?
Start by sticking a long piece of kindling into the ground above your tinder at about a 30-degree angle, with the other end of the stick pointing into the wind. Then lean smaller pieces of kindling against both sides of the longer piece to build a tent. As the kindling catches fire add more, followed by your firewood.
What are the three important things needed for combustion to occur explain why?
To summarize, for combustion to occur three things must be present: a fuel to be burned, a source of oxygen, and a source of heat . As a result of combustion, exhausts are created and heat is released.
What are the conditions necessary for combustion to take place Class 8?
The conditions under which combustion takes place are as follows: Presence of combustible substance. Presence of supporter of combustion – oxygen. Attainment of ignition temperature .
Are fire extinguisher signs required by OSHA?
Both OSHA and NFPA suggest that fire extinguishers must have identifying signs . Ultimately, the best reason to conspicuously alert staff members about the locations of fire extinguishers is because it is a good safety practice.
Because gasoline fires are the most common type of boat fire, marine-rated Class B fire extinguishers are the class required on most boats.
How many fire extinguishers are needed?
Every home should have at least one fire extinguisher that is easily accessible. Some homes should have at three or more, depending on the number of rooms and floors. Of course, while fire extinguishers control or extinguish small fires, they aren’t appropriate for large blazes.
What should you consider when choosing the type of foot protection you use?
Select CSA-certified footwear (or other certified footwear if permitted in your jurisdiction). Ensure that it has the proper rating for the hazard and the proper sole for the working conditions. Use metatarsal protection (top of the foot between the toes and ankle) where there is a potential for injury.
Which of the following was a recommendation of the 1947 Fire Prevention Conference Report?
Which of the following was a recommendation of the 1947 Fire Prevention Conference report? An increased focus on prevention education.
Which of the following is one of the purposes of a fire prevention plan?
What is the purpose of a Fire Prevention Plan (FPP)? The purpose of this Fire Prevention Plan is to eliminate the causes of fire, prevent loss of life and property by fire , and to comply with the Occupational Safety and Health Administration’s (OSHA) standard on fire prevention, 29 CFR 1910.39.
What is the four 4 step process to using a fire extinguisher?
For an easy-to-remember 4-step process to operating a fire extinguisher, learn the PASS system: Pull the pin while holding the extinguisher away from you to unlock the mechanism. Aim low toward the base of the fire. Squeeze the lever slowly.
What are the 4 steps in using a fire extinguisher?
- Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. ...
- Aim. Approach the fire standing at a safe distance. ...
- Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. ...
- Sweep.
What is the purpose of a fire prevention plan quizlet?
The purpose of a fire prevention plan is to reduce the probability that a workplace fire will ignite or spread , which helps prevent injury or death, keeps the workplace safe, and helps prevent financial losses to the medical office.
What is a fire protection plan?
A fire safety plan is a detailed document that covers all aspects of fire safety for a specific building or property . The plan will outline: A safe and orderly way for occupants to evacuate the building. ... Methods of control that minimize the damage from fires when they do occur.
