Slow down and stop for a steady yellow light, unless you are already within the intersection or cannot safely stop before entering the intersection.
What must you do when you reach a steady yellow traffic light?
When you see the yellow light, you should stop , if you can do so safely. If you can’t stop, look out for vehicles that may enter the intersection when the light changes.
What do you do in a yellow signal?
Yellow traffic light rules
Hence, when you see the yellow light, you should start slowing down to come to a stop in anticipation of red light . Also, in case, for any reason, you can’t stop, then you should look out for vehicles that might be entering the intersection around the same time.
What is yellow traffic light?
Yellow Light – The yellow light on traffic signals is a warning light , it is used for two purposes; one to indicate that you should slow your vehicle and prepare to stop for the red light,But if you have already crossed the intersection you should continue driving.
What should you do if you approach a yellow traffic light quizlet?
Reduce your speed, exercise caution at the intersection and proceed through the intersection at a reduced speed . A flashing circular yellow indication means caution. You should slow down, look carefully for hazards and proceed with caution.
What does a yellow signal mean for a train driver?
A yellow aspect ( Caution ) tells the driver that the next signal is red (danger) and that they must slow down in preparation to stop at the next signal.
What do traffic light Colours mean?
This diagram shows how a traditional traffic light works. Picture 1: A red light means stop. Picture 2: A green light means go. Picture 3: A yellow light means slow down and be ready to stop .
How do you follow a traffic signal?
Anticipate or have room to get surprised by a member of this group when you start. Similarly, if you are about to cross a traffic signal that is already GREEN then reduce your speed (instead of increasing to catch the GREEN light) and expect somebody to jump their RED light!
What does a yellow light or arrow means?
Any flashing yellow signal means you must proceed with caution. The yellow color means warning . A signal showing an arrow applies to turning traffic (you can only turn in the direction of the arrow) A flashing yellow arrow does NOT give you the right of way.
What should you do when approaching a steady green traffic light?
When approaching an intersection with a steady green traffic light, yield to pedestrians in the crosswalk and vehicles still in the intersection . You may continue driving, but should approach the intersection at a speed that will allow you to slow down and stop if the light changes before you get there.
What do yellow lights on train tracks mean?
When in doubt, remember that the colors for railroad lights are universally recognized. Similar to traffic lights, red means “stop,” yellow means “slow” or “caution ,” and green means “go.”
How do train signals work?
The basic signal consists of flashing red lights, a crossbuck and a bell, attached to a mast. At most crossings, the signals will activate about 30 seconds before the train arrives. ... At many crossings, there will be a gate added to the signal. The gates will be fully lowered 15 to 20 seconds before the train arrives.
When approaching a traffic signal displaying a steady yellow arrow drivers should?
A steady yellow arrow indicates that a red arrow is about to appear . Stop unless you are already within the intersection.
What does a double yellow signal mean?
Double yellow means that the next signal is yellow and you should be slowing down. Single yellow means the next signal is red. Red signal means you must stop, because there is a train in between the signal or the route has been set for another train.
Why are traffic signals red yellow green?
The rail road companies to ensure safety of its passengers, they introduced traffic lights; they used Red to stop, white to go and green for caution. ... Eventually, the Railway companies then started to move to green color, which means go and the color yellow to proceed with caution .
Is it OK to go through a yellow light?
There is no law in California that forbids drivers from being in an intersection during a yellow light.
How long do traffic lights stay yellow?
Federal guidelines recommend yellow lights last from 3 to 6 seconds . Local authorities set the duration based on many factors including: traffic volume, speed, roadway grade and intersection design..........
What does a steady yellow light at an intersection mean?
A steady yellow means the signal is changing to red . You must stop if it is safe to do so. ... Legally, every driver has to stop at a yellow light unless he or she is too close to the intersection to stop safely before entering the intersection.
Why must we follow traffic rules?
Traffic rules help protect you on the road as well as everyone else driving on the same road . ... Moreover, someone behind any bigger vehicle should also understand that there is limited visibility of the driver, and they should not try to come in the way of such vehicles which can be dangerous for both parties.
Why do you need to obey traffic rules?
It is important to follow all traffic laws to keep everyone safe on road . The amount of traffic accidents and losses drops significantly when people are obeying the rules on the road. ... Following traffic laws is one of the most essential aspects of driving and can increase your safety as well as of the people around you.
What does the yellow arrow show?
A flashing yellow arrow means YIELD to oncoming traffic and pedestrians and then proceed with caution . This indication replaces the common circular green indication for left turns.
Where should train signals be placed?
Signals are placed on the right side of the track . Trains are only allowed to go past signals that are on the right hand side from direction of travel. A train in automatic mode will not drive on a track if it would pass a signal on the left side unless there is also a signal on the right side at that signal.
What do train whistle signals mean?
The train whistle, or horn, is an important part of our safety practices. The horn alerts people that a train is approaching a railroad crossing . It can also be used to warn animals or trespassers in our right-of-way along a section of track.
Why do train lights flash?
Flashing red lights at railroad crossings are often accompanied by other types of warning devices. When you approach a railroad crossing and you see flashing red lights, this means that either a train is on the tracks or a train is approaching . In either instance, you should stop.
What skills does a train driver need?
- Good mechanical knowledge.
- Good hand-eye co-ordination.
- The ability to concentrate for long periods of time.
- Physical stamina.
- Good communication and interpersonal skills.
- The ability to deal with members of the public.
- Good reaction times.
- A good memory.
Who gives signal to the train?
(1) The Driver and the Guard of a train shall exchange signals with each other, at such time and in such manner as may be prescribed by special instructions.
How are automatic signals controlled?
The system controls the movement of trains between the blocks using automatic signals. ... The automatic operation comes from the system’s ability to detect whether blocks are occupied or otherwise obstructed, and to convey that information to approaching trains.
What does a green signal mean for a driver?
Green Traffic Light
A green light means ‘ GO’ . Yield to vehicles, cyclists, and pedestrians still in the intersection. Always approach an intersection at a speed that allows you to slow down and stop if the light changes.
How do trains communicate?
In the modern CBTC systems the trains continuously calculate and communicate their status via radio to the wayside equipment distributed along the line . ... These points are communicated to make the trains automatically and continuously adjust their speed while maintaining the safety and comfort (jerk) requirements.
What comes after double yellow signal?
A flashing double yellow (only used in 4-aspect signalling) means that the next signal is showing flashing single yellow . A flashing single yellow means that the next signal at the junction is showing (steady) single yellow with an indication for a diverging route, and the signal beyond the junction is at danger (red).
