When following another vehicle, you should look through, over, and around that vehicle . The first step in following and meeting traffic is managing the distance between your vehicle and the vehicle ahead. A high risk area from a sudden stop from another driver might be the lanes next to parked vehicles.
What do you do if an approaching vehicle does not dim his lights?
Explanation If an approaching driver fails to dim their high beams, glance toward the right side of the road . This will keep you from being blinded by the other vehicle's headlights and will allow you to see enough of the road to stay on course until the other vehicle has passed.
How far in advance feet must your bright lights be dimmed before meeting and overtaking another vehicle?
If you are driving with your high-beam lights on, you must dim them at least 500 ft from any oncoming vehicle, so you don't blind the oncoming driver. You must use low-beam lights if you are within 200-300 ft of the vehicle you are following.
How long do you have to drive when following another car?
When following another vehicle, how much driving time should you maintain between yourself and the vehicle you are following: 2 seconds .
What is the correct response when your vehicle starts to skid?
Most skids occur when conditions are slippery. If you find yourself in a skid, take your feet off the pedals. Stop braking and stop accelerating . Then, quickly turn the steering wheel in the direction you want to go.
When driving in the fog you should use which of the following?
Explanation If you must drive in foggy conditions, you should use your low beam headlights , as well as your fog lights, if your vehicle has them. High beams direct their light upwards, where it can bounce off the fog and into your eyes, reducing visibility even more.
When following another vehicle you should quizlet?
That is, leave at least four seconds of following distance behind the vehicle ahead of you . (At speeds of 30 mph or less, a three-second following distance may be sufficient.) Under more hazardous driving conditions, you should increase your following distance even more.
When following another vehicle you should use low beams?
Use your low beams when you come within 500 feet (about one block) of an oncoming vehicle. Also use your low beams when following another vehicle within 300 feet . Slow down when nearing a curve if you are driving the maximum posted speed limit.
When you overtake a vehicle you should?
- Scan for hazards, e.g., oncoming vehicles, vehicles approaching from rear, merging vehicles;
- Check for blind spots;
- Signal your intention and accelerate into passing lane;
- Accelerate quickly to an appropriate speed;
- Concentrate on the path ahead;
What is the sight distance rule?
Sight-Distance Rule
You are going too fast for your sight distance. You must not drive faster than the distance you can see . If you do, you are not safe and could injure or kill yourself or others.
Which of the following are used as left edge lines on divided highways?
Which of the following are used as left-edge lines on divided highways? Single, solid, yellow lines are used as left-edge lines on divided highways.
How is following distance determined?
A following interval (or following distance) is the distance between you and the car in front of you . ... Basically all you do is count the seconds between when the car ahead of you passes something stationary (a road sign, a tree, the guy selling watermelons on the side of the road) and when you pass it.
What is the following distance in Florida?
To avoid striking the vehicle in front of you, keep at least two seconds following distance .
How close should you drive behind another car?
The two-second rule is a rule of thumb by which a driver may maintain a safe trailing distance at any speed. The rule is that a driver should ideally stay at least two seconds behind any vehicle that is directly in front of his or her vehicle.
How far can an object extend from the left side of your car?
Do not carry anything in or on a passenger vehicle which extends beyond the fenders on the left side or more than 6 inches beyond the fenders on the right side.
What is the correct response when your vehicle starts to skid on ice quizlet?
What is the correct response when your vehicle starts to skid on ice? Take your foot off the accelerator, don't use the brake, turn the steering wheel in the direction of the skid.
What should you do when you begin to skid quizlet?
What should you do when you begin to skid? Turn the steering while in the direction in which the rear end of the car is skidding. Reduce pressure on the gas pedal.
When driving in the fog what should you use to safely guide yourself when you can barely see the road?
- Slow down. Fog makes it very difficult to judge speed—check your speedometer to make sure you have slowed down. ...
- Slow down in patchy fog conditions—be sure you turn on your vehicle's low-beam headlights. ...
- If the fog becomes so thick that you can barely see, pull safely and completely off the road.
How do you skid a car?
- Come off the brakes and accelerator.
- Steer into the skid; this means you look and steer in the direction you wish to go in which is the direction the back of the car is skidding. So if the car is sliding to the right, steer to the right.
When driving in fog you should quizlet?
Slow down before you enter fog . Use low-beam headlights and fog lights for best visibility even in daytime, and be alert for other drivers who may have forgotten to turn on their lights. Turn on your 4-way flashers. This will give vehicles approaching you from behind a quicker opportunity to notice your vehicle.
When should you use fog lights on a car?
Fog lights are designed to be used at low speed in fog, heavy mist, snow and other poor-visibility situations . They're different from daytime running lights. They are an extra pair of lights mounted low on the vehicle, with the thinking that fog doesn't settle on the road surface but hovers 12 to 18 inches above it.
When you are driving a motorhome and are following another vehicle you should quizlet?
Slow down and check your following distance again. The two-second rule applies to any speed in good weather and road conditions. If road or weather conditions are not good, double your following distance . You should also double your following distance when driving a motor home or towing a trailer.
When following another vehicle you should motorcycle?
To protect a tailgating motorcyclist while following another vehicle, you should increase your following distance . When a motorcycle is overtaking you, you should maintain speed and lane position.
What should you do when a motorcycle is following your vehicle?
Following Another Vehicle
In traffic, motorcycles need as much distance to stop as other vehicles. Normally, you should maintain a two-second following distance . To gauge your following distance: Ahead of you, pick out a marker such as a pavement marking or lamp post.
When should you follow a car?
When following a car, you should try to:
Ride where the other driver can see you in their rearview mirror . Ride next to another car to be more visible. Stay in the left side of your lane. Stay in the right side of your lane.
In what situation should you use high beams?
High beam headlights should be used at night , whenever you're unable to see enough of the road ahead to drive safely. Low visibility at night can be scary for even the most experienced drivers.
When overtaking another vehicle on the road the correct steps are to?
Stay central in the lane, make sure you pass with sufficient room to the slower car but by the same token don't get to close to the shoulder – contact with either can have dire consequences. While overtaking, make sure that you maintain a safe distance with the vehicle ahead .
What is sight distance in transportation engineering?
Sight distance available from a point is the actual distance along the road surface , over which a driver from. a specified height above the carriage way has visibility of stationary or moving objects.
What are two things that define your sight distance?
- Seeing something.
- Recognizing it's a hazard.
- Deciding whether to brake or steer around the object.
- Reacting.
When following a large vehicle you should?
TIP #1: Maintain a Safe Following Distance
In crashes, large trucks most often hit the vehicle in front of them. Did You Know? If you are driving below 40 mph, you should leave at least one second for every 10 feet of vehicle length .
When should you not overtake another vehicle?
Driving scenarios when overtaking is dangerous
Don't overtake when others are wanting to overtake if you can't get past the vehicle at a courteous speed difference , i.e. don't hold others up behind you by taking too long to overtake.
What is meeting sight distance?
Meeting Sight Distance Distance required to enable the drivers of two vehicles traveling in opposite directions on a two-way road with insufficient width for passing to bring their vehicles to a safe stop after becoming visible to each other.
What is the purpose of keeping a following distance?
The following distance is a space between your car and the car ahead of you. It is recommended to keep a reasonable following distance so you can safely stop in a case of an emergency , e.g., if the car ahead of you stops suddenly.
How much of a following distance should you allow?
Ideally, you should always try to maintain a 3-second following distance or more whenever possible. This will give you more time to react in case the vehicle in front of you slams on the brakes or hits another car.
How can you count following distance drivers ed?
As the vehicle in front passes the object, begin counting seconds (one- thousand-one, one-thousand-two, one-thousand-three). If it takes at least three seconds before the vehicle passes the object, a motorist should have enough distance for a sudden stop.
What is a left edge line?
Left edge lines are solid yellow lines . Edge lines help drivers stay on the road during low visibility conditions, such as fog, rain, and snow. Other lines may appear around the edges of medians or obstructions to guide drivers around them.
What indicates the right edge of the traffic lane?
A solid white line indicates: The right edge of the traffic lane on a road.
In which of the following situations are you not allowed to pass another vehicle on the right?
Passing on the right is permitted in all of the following situations: Passing on the right is permitted when driving in a lane set aside for right turns. When a lane is set aside for left turns , you must not pass on the right.
What's the following distance for cars?
The rule of thumb is to maintain at least a three-second following distance , giving you time to react and avoid potentially dangerous situations. You can calculate this by using a fixed object, such as a pole or an overpass to determine how far in front of you the car is.
What is following distance?
Following distance is the space between your vehicle and the vehicle in front of you while driving . It's important for all drivers to maintain a safe following distance, so that they have time to safely stop in case the vehicle in front of them brakes abruptly.
What is the distance that needs to be maintained with the vehicle it is following?
You can do it using a very simple trick known as the three-second rule. This rule states that you should leave at least three seconds of space between you and the car in front.
