A regular reboot of your Tablo solves many minor problems
and should always be your first troubleshooting step. To reboot your Tablo DVR, quickly press and release the blue reset button on the back right of the unit. Wait for the Tablo's blue LED to stop flashing. When the blue LED is solid, the reboot is complete.
How do I access my Tablo remotely?
If you
head to your Tablo's Settings > Tablo Connect and enable the feature by checking the box next to “Remote Access”
, you will see one of two possible messages. If you see “Your Tablo is ready for remote access”, this means everything is all set up and ready to use.
How do I watch Tablo on my phone?
Android fans can enjoy live and recorded TV
via the Tablo app
for Android smartphones and tablets. Any newer generation Android device running Android 4.4+ can be used with the Tablo app. If you want to watch TV while working on your Windows PC, you can enjoy live and recorded content from Tablo via the Windows 10 app.
Why won Tablo won't connect to Wi-Fi?
You will need to look in your router's configuration settings to determine the new SSID and password. In this case, use the Edit Wi-Fi option to configure the Tablo to access the network with updated credentials. If Tablo is still unable to connect,
verify that the router is set for WPA or WPA2 authentication
.
How do you use Tablo Ripper?
Select your Tablo from the drop-down list, and select a directory on your PC where you want the files saved. Then you'll get a list of recordings. Move a recording to the box on the right, and hit the start button. Repeat as necessary.
How do I reset my Tablo?
Make sure your Tablo's blue LED is solid.
Hold down the blue reset button on the back of the unit for 7+ seconds
. The blue LED on the front of the Tablo DVR will begin to flash faster and faster. Once it again turns solid, the Tablo will begin to factory reset.
How long does Tablo take to reboot?
To reboot your Tablo, quickly press and release the blue reset button on the back right of the box. Wait for the blue LED on the front of the Tablo to stop flashing. This should take
around one (1) minute
.
Why is my Tablo flashing blue?
Pulsing –
If your Tablo is using firmware version 2.2. 26 or above, its blue LED will pulse when it is ready to be added to your Wi-Fi network
. (This blink is not present on TV-connected DVRs like Tablo DUAL HDMI) Solid – Tablo is on, connected and your LED setting is On.
Does Tablo work with Roku?
The Tablo channel is available in the Roku channel store under the ‘TV & Movies' category.
The Tablo app is supported on the current generations of the Roku 1-4 and HDMI stick
. It is not currently possible to use Tablo Connect (our out-of-home streaming feature) via the Roku app.
Does Tablo work with Firestick?
The Tablo app is compatible with the Amazon Fire TV Stick Lite, Amazon Fire TV Stick, Amazon Fire TV Stick 4K, Amazon Fire TV Cube, and Smart TVs running the Amazon Fire TV platform.
How many devices can connect to Tablo?
Designed to be whole-home devices, network-connected Tablo DVRs let you stream live and recorded OTA HDTV content to
as many as 6 devices
on your local network at the same time. Or if you're on the go, you can stream your local TV shows anywhere in the world over WiFi or mobile data connections using Tablo Connect.
How do I connect my Tablo?
Select Wi-Fi under the settings menu. Your Tablo will appear in the Wi-Fi list. To connect to your the Tablo's WiFi network, select it from the list
. Once you have connected to your Tablo's Wi-Fi network, return to the Tablo app.
Does Tablo work with Locast?
NOTE –
Locast is NOT compatible with Tablo OTA DVRs
.
Does Tablo work with Wi-Fi?
Connecting via Ethernet or WiFi
Connecting your Tablo via Ethernet or WiFi is simple
.
How do I reset my Tablo Wi-Fi?
To reboot your Tablo,
press and quickly release the blue reset button on the back right of the box
. The Tablo will then boot into Wi-Fi setup mode. Instructions for this process can be found here. If you want to switch from Wi-Fi to Ethernet, attach the Ethernet cable to your router, then Tablo.
How do you reset a Tablo quad?
To perform a reset of the Tablo,
push and release the reset button immediately
. The blue LED on the front of the Tablo will begin to flash rapidly for a few seconds indicating a reboot process has started. Once the LED has turned solid, your Tablo is connected and ready for use.
Does the Tablo need to be connected to the router?
Yes. You definitely DO need internet access to use network-connected Tablo Over-the-Air DVRs
. Like many modern gadgets, most Tablo DVRs are network-connected devices, designed to have consistent high-speed internet access and will not function optimally without it.
What format does Tablo record in?
Recorded programs on Tablo are stored in an
HLS file
that can be reassembled into a standard MPEG file. There is no DRM.
How do I download a Tablo recording?
Tablo doesn't currently offer a built-in way to save your recordings for offline viewing. Fortunately,
a free Windows program called Tablo Ripper can pull those recordings onto your computer
.
How do you call Tablo?
Call
1-844-822-5688
or submit an email ticket.
How do I reset my Tablo dual HDMI?
Power cycling the Tablo HDMI can and will resolve the majority of most minor issues. This can be done safely by
removing the Tablo HDMI's power adaptor from the back of the unit for 2-3 seconds, and then reinserting it
. The Tablo HDMI will take 2-3 minutes to boot back up.
How do I contact Tablo?
Need help?
Call 1-844-822-5688 or email
[email protected]
.
Why does my Tablo keep buffering?
To resolve this, try reducing the Live TV or recording quality settings on your Tablo, switching to a different WiFi channel, upgrade to a newer router, try connecting the viewing device and/or Tablo via Ethernet, or move the router closer to the Tablo DVR and/or your viewing device.
Is Tablo TV free?
All Tablo OTA DVRs include a free 30-day trial of our Tablo TV Guide Data Service subscription
. Once your trial is complete you can choose to use Tablo without a subscription. However, to enjoy the full Tablo experience, a subscription to our optional TV Guide Data Service is recommended.
