Do New Motorcycles Require Special Maintenance?

by | Last updated on January 24, 2024

, , , ,


Your owner’s manual likely recommends a 600-, 1,000-, or even a 1,500-mile break-in process

where you limit throttle angle and revs, and constantly vary engine speed so that all those new internal components can get to know each other. For a new-bike owner, it’s a slow, grueling march toward your first service.

When should you get your first oil change on a motorcycle?

Some people recommend changing the oil on a new motorcycle

after that first 20-mile ride

. Then again at 50 miles and at 200 miles. You can choose to do that. There’s no harm in doing it but it’s time-consuming and costly.

How often should you service a new motorcycle?

As a general thumb rule, it is advised to service the motorcycle for

every 3000 miles (or 5000 kilometres) of distance traveled

. If your motorcycle is new, the first servicing should be done after travelling 500 miles (or 800 kilometres).

How do I prolong the life of my motorcycle engine?

  1. Check & Replace Engine Oil Regularly. …
  2. Brake-in the Motorcycle Properly. …
  3. Check & Lube the Chain Regularly. …
  4. Regular Lubrication. …
  5. Clean or Replace the Air Filter Regularly. …
  6. Ride Motorcycle Properly.

What to check on a motorcycle before riding?

What Should I Inspect on My Motorcycle? The Motorcycle Safety Foundation (MSF) suggests checking six areas before each ride. It uses the acronym T-CLOCS to help riders remember to take a look at the tires and wheels (T), controls (C), lights and electrics (L), oil and other fluids (O), chassis (C) and stands (S).

How many miles should a new motorcycle have?

The booklet that came with your new motorcycle probably says something about the maximum rpm’s for the first 1000 kilometers (often there will be a number for the first 100, the second 400 and the third 500 km’s). In most cases, you should keep them

below 4000, for the first 100 kilometers

.

What is the speed limit for new bike?

We recommend an average speed of

60-80 kmph

for riding a new bike before the first service of the vehicle as the new engine takes time to cop-up with the driving style and condition. This speed maintains the health of a vehicle and results in a good performance for a longer duration.

How many miles do motorcycles last?

For small sports bikes,

20,000 to 30,000

is on the high side. For larger bikes, 50,000 miles and up is considered high motorcycle mileage. But before you write off any models, consider that a properly maintained bike can last well past 100,000 miles!

What happens if I don’t service my bike?

It is also mentioned that bikes not serviced according to schedule and

with an authorized service center would lose warranty

. The first service of a two wheeler is done at 500 -700 KM or one month of usage. During this service, Engine oil is changed and water service is done.

What is the lifespan of a helmet?

Yes, your helmet does have a lifespan, and a fairly short one at that. The industry standard states that the lifespan of a motorcycle helmet is

five years

. That is as long as you have not cut its life short by an accident or impact to it. If that happens you should definitely not use it, time to trash it!

How long does it take to service a motorbike?

Once they are on it a service can take anything from

45 minutes to a day

– depending on the problems discovered and the complexity of your bike. As a rule of thumb, about 2 hours is a reasonable average.

How do you break-in a new motorcycle?

What happens when you dont change oil motorcycle?

When oil has not been changed for a long time,

it will begin to gel or solidify in an engine, eventually turning into sludge

. When this happens, the oil will not be able to reach all parts of the engine, leading to oil starvation in the crankshafts, bearings, camshafts, and other valve train components.

How much is a new motorcycle engine?

Parts and labor costs tend to range

between $2,500 and $4,000

for a typical engine rebuild. Basically replacing bearings and seals might be necessary when this type of engine repair is performed, as well as taking it out and replacing all fluids.

What is the most reliable motorcycle brand?

The most reliable motorcycle brands — the results

In a nutshell,

Honda and Yamaha

were the most-named most-reliable motorcycle brands. “Any Japanese” motorcycle was mentioned after that. That would include Honda and Yamaha, but also includes Suzuki and Kawasaki.

Do motorcycles last as long as cars?


Motorcycles Can Last as Long as Cars

The recipe to longevity for motorcycles is the same as it is for any piece of machinery: care, maintenance and timely repairs.

Do motorcycles hold value?


Bikes made by Harley-Davidson, BMW, and Ducati, in fact, seem to hold their MSRP value better than any others

. By brand, according to data compiled by the Kelley Blue Book Official Motorcycle Guide, Harley-Davidson motorcycles retained an average of 84% of their value over a five-year period.

How do I know if my motorcycle is in good condition?

How often should you check motorcycle oil?

  1. 1,000 miles.
  2. 2.500 miles.
  3. 5,000 miles.
  4. 7,500 miles.
  5. 10,000 miles.

How do you inspect a motorcycle?

  1. Overall Appearance. A clean bike is usually a happy bike. …
  2. Exhaust. Let’s check out the exhaust first. …
  3. Frame. As long as you’re down there checking on the exhaust, you might as well give the frame the once-over. …
  4. Clutch. …
  5. Brakes. …
  6. Suspension. …
  7. Chain and Sprocket. …
  8. Tires & Wheels.

What is breaking period?

noun.

a period during which certain restrictions or moderation in operating should be followed

, as the avoidance of high speed, rapid acceleration, or severe braking for a new automobile.

How do you break-in a new Harley Davidson engine?

  1. During the first 50 miles of riding, keep the engine speed below 3,000 RPM (5,000 RPM for VRSCTM) in any gear. …
  2. Up to 500 miles, vary the engine speed and avoid operating at any speed for long periods. …
  3. Drive slowly and avoid fast starts at wide-open throttle until the engine has warmed up.

Why do you need to break-in a motorcycle?

This minuscule size difference between parts meant that motorcycles needed a break-in period

to ensure optimal performance

. When you’re breaking in a bike, you’re making sure that the tiniest components have a chance to settle and seal well. Back then, a broken-in motorcycle had a lower rate of engine failure.

Is it true you can’t ride double on a bike until 500km?


It’s a fact or myth

. similarly after half engine work again same has to follow for 500km , does it work for engine long life or just a myth. It is advised to ride the new bike at economical speeds before the first service as the engine takes some time getting accustomed to the fuel lines.

Is it good to drive a brand new bike on a long route?


Do not ride your new bike on highways till the time you are not 100% comfortable with it

. You can practice riding your new bike on service roads or in an open area to get your clutch-gear-brake-accelerator combinations right.

Does bike mileage increase after first service?


Yes, The mileage improves after 1st service

and there on till completion of 5000 Kilometers.

David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.