Playground Fall Zone Requirements
Fall-related injuries on swings and slides are especially common. To meet fall zone requirements, surfacing in front of a slide’s exit should extend four feet plus the height of the slide, with
a minimum of six feet and a maximum of 14 feet
.
How many feet are in a front of a slide?
Requirements for slides:
high should be at least 7′′ but not more than 15′′
. The fall zone around slides should be at least 6 ft on all sides, except at the slide’s exit.
How do you measure a playground slide?
Generally for slides
the length is about twice the deck height it is made to fit
. For example, a slide that is meant for a 5 ft deck height will be approximately 10 ft long.
What slope should a slide be?
The target angle for fun and safety is
between 30-45 degrees
. According to the CPSC Playground Safety Handbook and ASTM F1487-11, an embankment slide should be designed to an average angle of 30 degrees and it must not exceed 50 degrees at any point.
What should the height of a swing be?
The seat of swings for preschool-age children should be at least 12 inches from the ground
, the seat of swings for school-age children should be at least 16 inches from the ground, and the seat of tot swings should be at least 24 inches from the ground.
How do you measure fall height?
Measure from the highest point where a child would be standing to the floor in inches
. Note that the measurement would be taken from the bottom of the child’s foot. Next round the inches to the next full “foot”. For example, if the highest level is 38 inches, that is 3 feet and 2 inches.
What does fall height mean?
Fall height is a measurement defined as the “
vertical distance between a designated play surface and the protective surfacing beneath it
.”
What is fall from a height?
They comprise a significant percentage of blunt trauma cases and emergency department (ED) admissions. [1] A fall is defined as an injury to a person that occurs after landing on the ground after falling from a higher place, such as a ladder, scaffold, building, roof, or other elevated place or work area.
Which leg do you slide with?
The
bent-leg (or feet-first)
is the most important slide to learn because it’s the most common form of slide, and it’s also the safest way to slide.
How do you slide your feet first?
How can I practice sliding at home?
What is the length of a slide?
Standard (4:3) slides have a size of
10 x 7.5 inches
or 25.4 x 19.05 cm. Widescreen (16:9) is the default slide size in Microsoft PowerPoint 2013, 2016 and 365. Widescreen (16:9) slides have a size of 13.33 x 7.5 inches or 33.867 x 19.05 cm.
What is the slope of a playground slide?
Slide and Embankment Steepness: Per the Consumer Product Safety Commission’s (CPSC) Public Playground Safety Handbook toddler slide chutes should have an average slope
no more than 24 degrees
. No section of a toddler slide should be steeper than 30 degrees.
How steep are slides?
The simple rules are that
the overall angle from top to bottom must not exceed 40 degrees
. 35 degrees is more normal, 40 is a little steep. A drop slide can be as steep as 60 degrees at the top, but will need a much longer run out at the bottom to make the overall average angle stay within the 40 degree guideline.
How long should a playground slide be?
What is the length of the slide? Generally for slides the length is
about twice the deck height it is made to fit
. For example, a slide that is meant for a 5 ft deck height will be approximately 10 ft long.
How do you slow down a playground slide?
Use a friction modifier – Place a strip of duct tape in the center and down the length of the entire slide surface
. This will solve the problem without causing permanent damage to your slide. Duct tape comes in dozens and dozens of colors and you can get one that matches the color of your slide.
How much space do you need at the bottom of a slide?
The minimum clearance between the bottom of the tire seat and the protective surface (ground cover) is
12 inches
. Slides are composed of materials that are appropriate for the climate (e.g. metal slides not used in hot, sunny climates).
How tall is a backyard swing?
The typical height for a home swing set is anywhere
between five and seven feet
. If you have children and a backyard, odds are, you have considered building or buying a play set. Play sets allow your children to pass the daylight hours in close proximity to your home.
How high is a swing set beam?
Standard single beam height is
8′
, also available in 10′ configuration. 10′ long, includes vertical ladders on both ends.
How tall can you make a swing set?
First, we recommend selecting an appropriate space for the swing set. The playset plans for the Classic A-Frame specify a finished product that is about 12 feet wide,
8 feet tall
and 8 feet deep. It should be installed on fairly level ground, and there should be about six feet of clearance from obstructions.
How long would it take to fall 1500 feet?
A typical skydiver in a spread-eagle position will reach terminal velocity after about
12 seconds
, during which time they will have fallen around 450 m (1,500 ft).
What is ASTM F1292?
The scope of ASTM F1292
establishes minimum performance requirements for the impact attenuation of playground surfacing materials installed within the use zone of playground equipment
. The standard is specific to surfacing used in conjunction with playground equipment.
Which type of fall surfacing is safe for outdoor environments?
Step 1: Select Appropriate Materials
Appropriate material examples include loose-fill material (wood products, sand, pea gravel, and crumb rubber) and unitary surface material (rubber tile, poured-in-place, and other artificial surfaces).
