We offer a wide selection of Solo Portable Sprayer Nozzles
to meet the majority of spraying needs. From basic adjustable nozzles to nozzles ideal for spraying delicate plants and flowers. Prevents spray tip from leaking when not in use.
Where are Solo sprayers made?
In Australia, we are the sole distributor of SOLO products, which are
manufactured in Germany
. A world-leader in two-stroke technology, SOLO produce garden and rural products for spraying pesticides and weed control agents.
What are the different types of spray nozzles?
- Flat fan nozzles. Flat fan nozzles produce a line of spray. …
- Hollow cone nozzles. Hollow cone nozzles produce a ring of spray. …
- Full cone nozzles. Full cone nozzles produce a solid circle of spray. …
- Tank cleaning. …
- Air atomising nozzles.
What happens if the nozzle of the sprayer is clogged?
Distribution is interrupted
. The spray tends to get “lumpy” with heavy areas and voids. Flow rates are reduced. With passages clogged, less liquid gets through the nozzle.
How do I choose a nozzle size?
The best nozzle size to choose is a 0.4mm nozzle for most standard 3D printing
. If you want to 3D print highly detailed models, use a 0.2mm nozzle. If you want to 3D print quicker, use a 0.8mm nozzle. For filaments that are abrasive like wood-fill PLA, you should use a 0.4mm nozzle or larger.
What do the numbers on a sprayer nozzle mean?
Most companies identify their flat-fan nozzles with a four or five digit number (Figure 2).
The first numbers are the spray angle and the other numbers signify the discharge rate at rated pressure
. For example, an 8005 has an 80 degree spray angle and will apply 0.5 gallons per minute (GPM) at rated pressure of 40 psi.
What are major parts of the sprayer?
BASIC COMPONENTS OF SPRAYER
Components of a sprayer are as follows (1) Nozzle body (2) Swirl plate (3) Filter (4) Over-flow pipe (5) Relief valve (6) Pressure regulator (7) Cut-off valve (8) Spray boom (9) Drop legs (10) Nozzle boss (11) Nozzle disc (12) Nozzle cap (13) Nozzle tip (14) Spray lance (15) Spray gun.
What is the nozzle size?
The orifice size of the nozzle determines the operating pressure of your machine
. As a rule of thumb, the smaller the orifice, the greater the restriction of water flowing through the machine. This causes the pressure to increase. Choosing a nozzle with too large of an orifice will reduce operating pressure.
How far apart are sprayer nozzles?
They are available in spray-fan angles of 65, 80, and 110 degrees and are usually spaced
20 inches
apart on the boom at a height of 15-24 inches. Figure 1. Flat Fan Nozzles angled 5 degrees from the boom. The normal recommended operating pressure for regular flat-fan nozzles is 20 to 30 psi.
Who owns Solo sprayers?
The current Managing Director,
Mr R J Vale
, took over from his father in 1985. The company now sells all types of sprayers for many different purposes but the original SOLO sprayer is still made.
What is knapsack sprayer?
Definition of knapsack sprayer
:
a spraying apparatus consisting of a knapsack tank together with pressurizing device, line, and sprayer nozzle, used chiefly in fire control and in spraying fungicides or insecticides
.
How do you unclog a backpack sprayer?
How do you unblock a sprayer?
How do you unclog a sprayer?
What does 517 mean on a spray tip?
It’s the combination of fan-width and orifice-size that determines how thick of a coating you’ll spray. Case in point – a 317 tip and a 517 tip both have the same orifice size – 17-thousandths of an inch. But, the 517 tip
sprays a 10-inch-wide fan
, while the 317 sprays a 6-inch-wide fan.
What do colors of spray nozzles mean?
The first color scheme, the color of the spray nozzle tip,
describes the capacity (flow rate) of the nozzle orifice at 40 PSI
and is based on Standard 10625 of the International Standards Organization (ISO) (Table 1). Nozzle flow rates are mainly a function of orifice size & pressure.
What is a 417 spray tip used for?
Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints
. 8 inch spray pattern ideal for larger surfaces such as interior or exterior walls.
Which nozzle covers the entire area at small range?
6. Which nozzle covers the entire area at small range? Explanation:
Solid cone nozzle
covers the entire area at small range. The construction is similar to hollow cone nozzle with the addition of an internal jet which strikes the rotating liquid just within the orifice of discharge.
What are the different types of sprayer?
- Knapsack Sprayer.
- Portable Power Sprayer.
- Knapsack Power Sprayer.
- Mist Dust Sprayer.
- HTP Sprayers.
- Orchard Sprayers.
What is the difference between sprayer and duster?
The main difference between dusters and sprayers is the thing that hose on sprayers are the one’s that are attached to the meters the patricide are.
Sprayers mainly spray the water as showers whereas the duster only pushes the water in single go
. This is the main light difference between sprayer and the duster.
How wide can a .4 nozzle print?
With a 0.4 mm nozzle, you can print extrusion widths from
0.24 mm to 0.8 mm
. A high extrusion width produces stable, fast printed objects.
Does a nozzle increase pressure?
In a convergent nozzle, there is an increase in velocity and a
decrease in pressure
, but we know that pressure is inversely proportional to area.
What does nozzle diameter mean?
A larger-diameter nozzle lays down wider perimeters, which means that it uses fewer perimeters than a smaller-diameter nozzle to print a wall of the same thickness
. A nozzle with a larger diameter also allows for printing with increased layer height. Combining these two effects leads to a noticeably shorter print time.
