Why Does My Car Keep Saying No Remote Detected?

by | Last updated on January 24, 2024

, , , ,

What does it mean when your car says key not detected? It means that

the vehicle can not receive a signal from a working key, often caused by weak batteries inside the key fob

. Other possible issues include the wrong key is being used, or the key is damaged, which is common if the key has been exposed to water.

How do I resync my car remote?

Press and hold the

“Lock” button on

your car remote for one second within five seconds of putting the key into the ignition and turning it to the “On” position. Turn the key to the “Off” position; the lights should turn off.

Why is my Ford saying no key detected?


A valid key must be located inside your vehicle to switch the ignition on and start the engine

. The keyless starting system may not function if the key is close to metal objects or electronic devices such as cellular phones, or if the key battery has no charge.

Do you have to reprogram a key fob after changing the battery?

No.

You do not need to reset

or reprogram your key fob after replacing the cell. Your key fob does not use a battery.

Can I start my car without key fob?

Automakers know that your keyless ignition may need to work if the fob dies, and the system has been designed to work even with a non-functioning remote. Some cars are equipped with a means of starting the car

manually

, and some have a backup built into the key fob that works without a key.

How do I resync my Vauxhall key fob?

  1. Switch on igntion, system will then remain in synchronizing mode for 30 seconds.
  2. Press and hold either the Lock or Unlock button for a few seconds.
  3. Remove key and test remote functions.

What would causes a remote start to stop working?

The single biggest thing that can cause a remote starter not to engage is

a faulty or missing hood switch

. This device gets installed under the hood of your vehicle and prevents the engine from starting when the hood is up.

How do you reprogram a car remote?

  1. STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed. …
  2. STEP 2-Press the lock button. …
  3. STEP 3-Turn off the ignition. …
  4. STEP 4-Repeat the process with other key fobs. …
  5. STEP 5-Restart the process.

Why won’t my car start if the battery isn’t dead?

If your vehicle won’t start, it’s usually caused by a dying or dead battery, loose or corroded connection cables,

a bad alternator or an issue with the starter

. It can be hard to determine if you’re dealing with a battery or an alternator problem.

How much does it cost to reprogram a key fob?

Several factors determine the cost to reprogram a fob. While it’s hard to give a universal estimate, the general cost is

between $50 and $250

for reprogramming.

How much is a key fob battery?

Key Fob Battery Replacement

First, key fobs use widely available batteries that usually cost

less than $5

.

How do I know if the chip in my key is bad?

Problematic

emergency signal

– if your car’s emergency signal suddenly goes off without the slightest hint of cause, or if you cannot turn it off after it has been activated, chances are your transponder key is malfunctioning.

How do I know if my key fob battery is low?

In many cars, a key fob has a

little LED light

that illuminates when pressing any of the fob buttons. If the LED light doesn’t light up at all, the fob battery is dead or there is some other problem with the fob.

How long does it take to reprogram a car key?

Most dealers we contacted said key-fob programming typically takes just

15-30 minutes

, and the whole process, including cutting the mechanical spare key, rarely takes longer than an hour.

How do you reset a remote car starter?

Press the

Lock button

on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.

Can remote starter drain battery?

All remote starters, whether from Compustar, Arctic Start, or another brand, draw power from your battery. … However, it is still possible for a remote car starter to consume too

much

power from your battery.

Do remote starters go bad?

Are Remote Starters Bad for a Vehicle’s Battery? The other knock on remote car starters is

that they can damage a vehicle’s battery

. … If your car did not come with a remote starter and you want to install an aftermarket model, improper installation could lead to issues with your battery and electrical systems.

How do I reprogram my Ford key fob?

  1. Shut the car doors, then open the driver-side door. Press the UNLOCK button the driver-side door.
  2. Now, turn the ignition from OFF to RUN 8 times. …
  3. Press any button on the Ford remote to program it. …
  4. Have more than one key fob? …
  5. Lastly, turn the ignition OFF.

Why isn’t my key opening my car?

An old lock might just need some

lubrication

in order to turn properly. In this event, use some professional lubricant like W-D 40 to get the gears sliding better, then try the key again. If the problem was just debris or rust, lubricant will solve it.

Who can program a keyless remote?


Call a local locksmith

; they can usually program a key fob significantly cheaper. Average price for programming a key fob is about $60.

How do I reprogram my Ford Focus key?

  1. Close all doors on your vehicle. …
  2. Turn the ignition from OFF to RUN 8 times, within 10 seconds. …
  3. At this point, the door locks will lock and unlock. …
  4. Within 8 seconds, push any button on your Ford remote to begin programming.

How do I start my Ford Focus with a dead key fob?

Simply place the key fob in the rear cup holder and start the car as normal. After inserting the key fob, buttons facing the back of the car, in the exposed slot, use

the Start / Stop ignition button and brake pedal

to start your vehicle as usual.

What are the signs of a bad alternator?

  • Car Won’t Start. A dead battery almost always lies behind a car that won’t start. …
  • Engine Stalling. A dead alternator almost always leads to a car that won’t start. …
  • Electrical Issues. A dying alternator can lead to a wide range of other electrical issues. …
  • Unusual Sounds.

What does it mean if your car won’t start but the lights come on?

Broken or Damaged Ignition

If your headlights can turn on, but your car won’t crank, that means that

your battery is charged

, but either the starter or ignition is the problem. If the starter or ignition is the problem, a starter engine can be jumped by using a charged battery.

How do you tell if its your starter or your battery?

Last, Check The Starter

The battery sends a

burst of energy to the start

which uses this energy to turn the engine over and get it car started. If you put the key in the ignition, but only hear a click when you turn the key, you’ve got a problem with your starter.

What do I do if my key fob doesn’t work?


Bad Battery

– The most common reason your key fob has stopped working is because of a dead battery. A simple swap with a fresh battery that you can find at most big box stores should do the trick to get things working again. Try opening your car door with a second key fob.

Timothy Chehowski
Author
Timothy Chehowski
Timothy Chehowski is a travel writer and photographer with over 10 years of experience exploring the world. He has visited over 50 countries and has a passion for discovering off-the-beaten-path destinations and hidden gems. Juan's writing and photography have been featured in various travel publications.