| John Deere 1010 Power | Drawbar (claimed): 30 hp 22.4 kW | PTO (claimed): 36.13 hp 26.9 kW | Drawbar (tested): 30.00 hp 22.4 kW | PTO (tested): 36.13 hp 26.9 kW |
|---|
What year did John Deere make 1010?
| Model history | Model discontinued 1965 | Model status Discontinued | Superseded by John Deere 1020 | Engine Specification |
|---|
What is the horsepower of a John Deere 1010 tractor?
| John Deere 1010 Power | Engine (net) 40 hp 29.8 kW |
|---|
How much does a John Deere 1010 dozer weight?
| John Deere 1010 Crawler Engines | John Deere 1.9L 4-cyl gasoline | John Deere 2.4L 4-cyl diesel | Fuel tank 12 gal 45.4 L | Engine details … |
|---|
How much oil does a John Deere 1010 hold?
| Engine Detail | John Deere | Starter volts 12 | Oil capacity 5 qts 4.7 L | Coolant capacity 11 qts 10.4 L |
|---|
What is a John Deere 1010 special?
$3,500 (1965 ) The John Deere 1010 was available in multiple versions. Row Crop (R), Single Row Crop (RS), Row Crop Utility (RU), Orchard (O), Utility (U), and Industrial Wheel (W) in addition to two crawler types. Also a low-cost Special
Row Crop Utility
(RUS) version was made that was $300 less than regular models.
How much horsepower does a John Deere 1020 have?
| John Deere 1020 Power | Drawbar (claimed): 33 hp 24.6 kW | PTO (claimed): 38.82 hp 28.9 kW | Drawbar (tested): 31.81 hp 23.7 kW | PTO (tested): 38.92 hp 29.0 kW |
|---|
How much horsepower does a John Deere 40 have?
| John Deere 40 Power | Drawbar (claimed): 16.77 hp 12.5 kW | Belt (claimed): 21.13 hp 15.8 kW | Drawbar (tested): 21.71 hp 16.2 kW | Belt (tested): 24.25 hp 18.1 kW |
|---|
How do you check the hydraulic fluid on a John Deere 1010 tractor?
- Remove the cap from the reservoir, which is usually located behind the driver’s seat on John Deere tractors. …
- Pull out the dipstick and read the level. …
- If you do need to add fluid, use a clean funnel to pour the oil into the reservoir slowly.
How much does a John Deere 350 Dozer weight?
| ENGINE | MAKE John Deere | OPERATIONAL | OPERATING WEIGHT 10600 lb 4808.1 kg | FUEL CAPACITY 22 gal 83 L |
|---|
How many horsepower is a John Deere 1520?
| John Deere 1520 Power | Drawbar (tested): 38.48 hp 28.7 kW | PTO (tested): 47.86 hp 35.7 kW | power test details … |
|---|
How many horsepower is a Ford 2000 gas tractor?
| Ford 2000 Power | Engine: 36 hp 26.8 kW | PTO (claimed): 31 hp 23.1 kW | Drawbar (tested): 28.10 hp 21.0 kW | PTO (tested): 32.09 hp 23.9 kW |
|---|
Where is the serial number on a John Deere 1010 crawler?
| Serial Number: Year Made: Plate Location: | 10001 1960 PLATE ON RH SIDE OF ENGINE BLOCK |
|---|
What years did John Deere make the 1020?
The John Deere 1020 was built
from 1965 to 1973
in Dubuque, Iowa, USA, Mexico and Mannheim, Baden-Württemberg, Germany.
What does a John Deere 60 weigh?
| John Deere 60 Weight | Shipping: 5,300 lbs 2404 kg | Operating : 5,800 lbs 2630 kg | Ballasted: 7,400 lbs 3356 kg |
|---|
What does a John Deere 50 weigh?
| Dimensions & Tires | Wheelbase: 90 inches 228 cm | Weight: 4855 lbs 2202 kg | Front tire: 5.50-16 | Rear tire: 10-38 |
|---|
What is a John Deere 40?
The 40 marked a turning point in John Deere history. It was
the replacement tractor of the John Deere M.
To aggressively address the competition, it introduced John Deere’s first standard three point hitch and hydraulic TOUCH-O-MATIC controls. The 40 was produced in Dubuque, Iowa, between 1953 and 1955.
Does tractor hydraulic fluid go bad?
Hydraulic fluid may not expire like milk
, but it will degrade over time even when your machine’s not running. … Another way that hydraulic fluid can “wear out” involves it becoming dirty or contaminated over time. No matter how clean you run your system, you are still going to have issues with hydraulic contamination.
Should tractor be running to check hydraulic fluid?
IMPORTANT:
Never check the hydraulic fluid level with the tractor running
. The engine must be turned off to get an accurate read. View the oil level in sight glass (A). The level should be between the marks on the glass with the optimal level being just beneath the top mark.
How full should a hydraulic tank be?
Hydraulic system reservoir: Sizing a hydraulic reservoir suggests that its volume (rule-of-thumb) should
equal three times the rated output of the system’s fixed-displacement pump
or mean flow rate of its variable-displacement pump. This means a system using a 7-gpm pump should have a 35-gal reservoir.
How much does a d3 Dozer weigh?
| Operating Weight 20639.68 lb 9362 kg | Operating Weight – LGP 21369 lb 9693 kg | Operating Weight – LGP, 762 mm/30 in 21810 lb 9893 kg | Note (2) For machine with ripper, add 554 kg (1,222 lb). For machine with ripper, add 554 kg (1,222 lb). |
|---|
How much does a 450 John Deere Dozer weight?
| Cooling System Fluid Capacity 4 gal (15 l) | Fuel Capacity 31 gal (117 l) | Hydraulic Fluid Capacity 7 gal (27 l) | Operating Voltage 12 V V | Operating Weight 15630 lbs (7,090 kg) |
|---|
How much does a John Deere crawler weigh?
450KCrawler Dozer. Operating Weight:
7 959–8 522 kg (17,510–18,752 lb.)
Track on Ground: 2 184 mm (86 in.)
What horsepower is a 1520 Ford tractor?
| Ford 1520 Power | Engine (gross): 23 hp 17.2 kW | Engine (net): 22 hp 16.4 kW | Gear PTO (claimed): 19.5 hp 14.5 kW | Hydro PTO (claimed): 18.5 hp 13.8 kW |
|---|
How much oil does a 1520 John Deere hold?
The capacity of the crankcase is
6 U.S. quarts
.
How many horsepower is a Ford 1700?
| Ford 1700 Power | Engine (gross): 25 hp 18.6 kW | Engine: 23.9 hp 17.8 kW | Drawbar (claimed): 19 hp 14.2 kW | PTO (claimed): 23.26 hp 17.3 kW |
|---|
How many quarts of oil does a John Deere 1020 take?
See subsection below oil viscosity chart for synthetic oil recommendations. John Deere 1020 and 301A models powered by the 2.5L 3 cylinder diesel have an oil capacity of
6 quarts
(with filter change).
How much does a 1020 John Deere weigh?
| John Deere 1020 Weight | Gas Shipping: 4210 lbs 1909 kg | Gas Operating: 4730 lbs 2145 kg | Diesel Operating: 4870 lbs 2209 kg | Ballasted: 5955 lbs 2701 kg |
|---|
How much does a John Deere 2020 weight?
| Dimensions & Tires | Wheelbase: 86 inches 218 cm | Weight: 5770 lbs 2617 kg | Front tire: 7.50-16 | Rear tire: 15.5-38 |
|---|
How many horsepower is a Ford 600 tractor?
The “600” and “700” both had
around 30 HP
on the drawbar with the “600” set up as a utility or plowing tractor while the “700” was a row crop version with high ground clearance. The “800” and “900” both had around 40 HP with the “900” as the row crop tractor.
How many horsepower is a Ford 4000 tractor?
| Ford 4000 Power | Engine (gross): 62.5 hp 46.6 kW | Drawbar (claimed): 37.8 hp 28.2 kW | PTO (claimed): 43.5 hp 32.4 kW | Plows: 4 |
|---|
