What Are The Disadvantages Of Shaded Pole Motor?

by | Last updated on January 24, 2024

, , , ,
  • Very low starting torque.
  • Low power factor.
  • High losses.
  • Less efficiency.
  • Difficult in speed reversal as it requires expensive copper rings.
Contents hide

Why is the shaded pole motor less efficient?

The shaded pole induction

does not have any centrifugal switch

. Thus, the chances of failure of the motor are less. The centrifugal switch is the type of electrical switch that starts operating by using the centrifugal force, generated by the rotating shaft. It is also used for controlling the speed of the shaft.

What are shaded pole motor most likely used?

Because their starting torque is low, they are best suited to

driving fans or other loads that are easily started

. They may have multiple taps near one electrical end of the winding, which provides variable speed and power by selection of one tap at a time, as in ceiling fans.

How does a shaded pole motor work?

The working principle of shaded pole induction motor is simple, the

main winding carries alternating current and produces magnetic flux in the stator coil

. … By lenses Law, the flux in the shade band opposes the main stator flux. It causes a slight magnetic imbalance and generates a rotating magnetic field.

How the shaded pole motor is started?

Definition: A shaded pole induction motor is a simple single-phase induction motor, which is self-starting with

one of the poles shaded by the copper ring

. The other name of the copper ring is a shaded ring, where it acts as a secondary winding motor. … This motor is made up of stator and a rotor which is cage type.

When was the shaded pole motor invented?

From Wikipedia, the free encyclopedia

The shaded-pole motor is the original type of AC single-phase induction motor, dating back to

at least as early as 1890

.

Who invented the shaded pole motor?

A reversible shaded-pole motor was made by

Barber-Colman

several decades ago. It had a single field coil, and two principal poles, each split halfway to create two pairs of poles.

Do shaded pole motors need a capacitor?

Shaded Pole Motor

Also called a single phase induction motor, simply connecting to a single voltage line and

an external capacitor is required to

make this motor turn.

What is the difference between shaded pole and PSC motors?

Shaded pole motors use alternating current (AC) applied sequentially around the stator ring to generate an almost rotating magnetic field. … Permanent split capacitor (PSC) motors use a capacitor in one of the windings to

increase the current lag between

the two windings to make the rotor turn.

What is the speed of a shaded pole motor?

A shaded pole motor is a type of induction motor, just using some neat magnetic tricks to generate a second phase. It runs at slightly below synchronous speed, the slip depends on the torque. For a simple 2 pole motor, you'd expect it to run at perhaps

90% of 3000 rpm (50 Hz countries)

, or 3600 rpm (60 Hz).

Why are shaded pole motors self starting?

Shaded pole motor is a self-starting motor because it is a small squirrel-cage motor in which the auxiliary winding is composed of a copper ring or bar surrounding a portion of each pole. This auxiliary single-turn winding is

called

a shading coil.

How does a shading coil work?

A short-circuited coil for partially delaying change in magnetic flux by using the current generated by mutual inductance between the magnetic pole of a DC electromagnet that has been partially encased and an excitation coil. Shading

coils reduce the vibration of the moving parts

.

What determines the rotation of a shaded pole motor?

It's easy to determine the direction of rotation of a shaded pole motor. The rotor will always turn from the middle of the pole towards the “shaded” portion of the pole. … The stator contains the shading poles.

The position of shading poles

determines the direction of rotation of the rotor.

Is a shaded pole motor efficient?

The efficiency of shaded pole motors generally is

only between 15 and 30%

. And the power factor is rather low as well. A low power factor and efficiency is probably ok for applications where there is only one small fan (shaded pole motors are generally 40 W or less).

Is a shaded pole motor synchronous?

Shaded-pole synchronous motors are

a class of AC motors

. … Because of this, these motors are often used to drive electric clocks and, occasionally, phonograph turntables. In these applications, the speed of the motor is as accurate as the frequency of the mains power applied to the motor.

Which motor is used in hair dryer?

Conventional hair dryers traditionally make use of

AC universal motors

capable of achieving high-speed rotation while operating on single-phase power supplies commonly used in households.

Which motor has more starting torque?

The

capacitor start motor

develops a much higher starting torque of about 3 to 4.5 times of the full load torque.

Can a motor run without a capacitor?

Without the capacitor the

motor will not start automatically

but without a capacitor, a flick on the shaft will make the single phase motor run in either direction, provided that the main winding is operation as it should do.

Which motor will have high power factor?

The power factor, torque pulsation, and efficiency are also improved because the motor runs as a two-phase motor. The motor will run more quickly.

Capacitor Run Motor

has relatively higher power factor.

Which type of motors are used for lathes?


DC shunt motor

is used for driving constant speed line shafts, lathes, vacuum cleaners, wood-working machines, laundry washing machines, elevators, conveyors, grinders and small printing presses etc.

What happens if you remove a capacitor?

The increase in phase shift causes increase in torque. If the fan is already running and you remove the capacitor then it is same as capacitor start motor where capacitor gets removed at a certain speed. The effect of removing capacitor will be

to reduce the torque produced by motor

.

What happens if you bypass a capacitor?

These unwanted perturbations (if not controlled) can couple directly into the circuit and cause instability or damage. In this case, the bypass capacitor is a first line of defense. It

eliminates voltage droops on the power supply by storing electric charge to be released upon the occurrence of a voltage spike

.

Can you speed control a PSC motor?

PSC Motor Speed Control

The 770-PSC Control offers a way to add existing single phase PSC or shaded pole motor fans to a building automation system. The 770-PSC control measures the motor's RPM, using an easy to attach sensor, and can

adjust

the motor's speed to match a chosen set point.

Can you vary the speed of a PSC motor?

The speed of a PSC induction motor with a fan load

can be adjusted while the motor is running

. Changing the voltage provides a continuous range of adjustment. The diagram below, shows the full-voltage torque vs. speed curve and three reduced-voltage examples.

What does PSC mean in motors?

There are two different types of blower motors for your forced air system, the PSC (

permanent split capacitor

) and ECM (electronically commutated motor).

Which motor can be run on AC as well as DC supply?


The universal motor

is a type of electric motor that can operate on either AC or DC power and uses an electromagnet as its stator to create its magnetic field.

How can a shaded pole motor be reversed quizlet?

The shaded pole motor can be reversed

by reversing the stator

.

What are the 5 types of single-phase motors used in the industry?

Types: There are a few different types of single-phase motors; some of these are

two-valve capacitor, capacitor-start, split-phase, permanent-split capacitor, wound rotor and shaded-pole motors

. Each type of motor has its own unique advantages and disadvantages.

Which motor is inherently self starting?

Which of the following motors is inherently self starting ?

Reluctance motor

is also self starting type singly excited synchronous motor.

Is it possible to change the direction of rotation of a shaded pole type induction motor explain your statement?

This copper ring act as a secondary winding for the motor. The shaded pole motor rotates only in one particular direction, and the reverse movement of the motor is

not possible

. The direction of rotation of the magnetic field is from the main (unshaded) pole to the shaded pole.

Which motor is best suited for domestic refrigerator?


Single phase induction motor

is used in household refrigerator.

What are three basic types of three phase motors?

  • Squirrel Cage Induction Motor.
  • Slip-ring or Wound Rotor Induction Motor.

What is the purpose of shading ring?

The copper ring used in a shaded-pole motor

to produce a rotating magnetic field for starting purposes, or used around a part of the core of an alternating-current relay to prevent contact chatter

. Also known as shading coil.

How does a shaded pole relay work?

Shaded Pole Type Induction Relay :

A shading ring or coil is made of copper (Cu) and

encircles the part of the pole face of each pole at air-gap

. Thus, two alternating fluxes are produced and are displaced in time and space. … This resultant torque rotates the disc, which in turn operates the relay contact mounted on it.

What determines the synchronous speed of a shaded-pole motor?

The synchronous speed (the speed at which the stator field rotates) is determined by

the frequency of the input ac power and the number of poles in the stator

. The greater the number of poles, the slower the synchronous speed. The higher the frequency of applied voltage, the higher the synchronous speed.

David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.