Which Device Makes All Network Devices Connected?

by | Last updated on January 24, 2024

, , , ,


A

connects networks together. Routers operate at the networking level of the TCP/IP protocol stack. On Home networks the router is responsible for connecting the home network to the Internet and provides several important networking services like: DHCP.

Contents hide

What device connects networks?

5.

Routers

– A router is a device like a switch that routes data packets based on their IP addresses. The router is mainly a Network Layer device. Routers normally connect LANs and WANs together and have a dynamically updating routing table based on which they make decisions on routing the data packets.

Which device is used to connect multiple networks?

1

Routers

.

A router

is a hardware device that connects two or more networks. Routers are the primary backbone device of the Internet, connecting different network technologies into a seamless whole.

What device in layer 3 connects two networks together?


A router

is considered a layer-3 device because its primary forwarding decision is based on the information in the layer-3 IP packet, specifically the destination IP address.

Which device that connects to a network without the use of cables?

A device which can be connected to a network without using cable is called

wireless device

.

Which device connect multiple devices?

The correct answer is the

hub

. An hub, active hub, network hub, repeater hub, multiport repeater, or simply hub is a network hardware device for connecting multiple Ethernet devices together and making them act as a single network segment.

What is a bridge network device?

A network bridge is

a computer networking device that creates a single, aggregate network from multiple communication networks or network segments

. … If one or more segments of the bridged network are wireless, the device is known as a wireless bridge.

What is a layer 4 device?

Layer 4 refers to the fourth layer of the Open Systems Interconnection (OSI) Model, known as the transport layer. It provides

the transparent transmission or transfer of data between end systems or hosts

and is responsible for end-to-end error recovery, as well as flow control.

What is Layer 1 devices in networking?

Examples of layer 1 devices include

hubs, repeaters & Ethernet cable connectors

. These are the basic devices that are used at the physical layer to transmit data through a given physical medium which is suitable as per the network need.

What is layer3 device?

The layer 3 in the OSI model is the network layer. The device that comes under this layer is

the router

. The functions include address handling,logical address and names to physical address translation ,routing and traffic management.

What device separates a single network?

Que. What device separates a single network into two segments but lets the two segments appear as one to higher protocols? b.

Bridge
c. Router d. Gateway Answer:Bridge

What is a modem connected to?

Your modem connects

to one port on the router

—usually (but not always) labeled “Wide Area Network,” or “WAN”—and all of your devices connect to the other ports, or wirelessly over the Wi-Fi standard.

When computers are connected in LAN then?

Computers connected to a LAN can

share information and/or share peripheral equipment

.

What is difference between hub and switch?

KEY DIFFERENCES

A Hub is a networking device that allows you to connect multiple PCs to a single network, whereas

a Switch connects various devices together on a single computer network

. A Hub operates on the physical layer, whereas Switch operates on the data link layer.

Which device is called intelligent device in networking?

Explanation:

network switch

(also called switching hub, bridging hub, officially MAC bridge) is a computer networking device that connects devices together on a computer network by using packet switching to receive, process, and forward data to the destination device.

Is switch a networking device?

Switches are

networking devices operating at layer 2 or

a data link layer of the OSI model. They connect devices in a network and use packet switching to send, receive or forward data packets or data frames over the network. A switch has many ports, to which computers are plugged in.

What is switch router and hub?

A

switch transmits data from one device to another in form of frames

while a router transmits data from one network to another in form of packets. A hub transmits data from one device to another in form of binary bits.

What is a Level 3 network?

Layer 3 is

the network layer

and its protocol is the Internet Protocol or IP. … Traditionally, the network device most associated with Layer 3 has been the router, which allows you to connect devices in different IP networks.

What is Layer 3 routing?

Simply put, a layer 3 switch

combines the functionality of a switch and a router

. It acts as a switch to connect devices that are on the same subnet or virtual LAN at lightning speeds and has IP routing intelligence built into it to double up as a router. … This is how a layer 3 switch acts as both a switch and a router.

Is a PC a Layer 3 device?

For a PC to be considered a Layer 3 device it would have to make all it's decisions based on L3 information such as IP-addresses.

Is UDP an IP?

UDP is

an alternative to Transmission Control Protocol

(TCP). Both UDP and TCP run on top of IP and are sometimes referred to as UDP/IP or TCP/IP. … On the other hand, UDP sends messages, called datagrams, and is considered a best-effort mode of communications.

What network devices operate at OSI Layer 2?

The devices that operate at the Network Access layer include

Layer 2 switches and bridges

(operating on the Data Link layer) and Layer 1 hubs and repeaters (operating on the Physical layer).

What is Ethernet connection?

Ethernet is

a way of connecting computers and other network devices in a physical space

. This is often referred to as a local area network or LAN. The idea of an Ethernet network is that computers and other devices can share files, information and data between each other efficiently. Ethernet was released in 1980.

Is a router a Layer 1 device?

Bridges and Switches are considered Layer 2 devices while routers are

considered Layer 3 devices

. Network Interface Card or NICs operate at Layer 2 of the OSI model.

What does a multilayer switch do?

A multilayer switch is

a network device that has the ability to operate at higher layers of the OSI reference model

, unlike the Data Link Layer (DLL) traditionally used by switches. A multilayer switch can perform the functions of a switch as well as that of a router at incredibly fast speeds.

What is L2 network connectivity?

Layer 2 refers to the

data link layer of the network

. This is how data moves across the physical links in your network. It's how switches within your network talk to one another. Installing Layer 2 on your infrastructure gives you high-speed connectivity between devices.

Which of the following devices is not a networking device?

(C)

CPU

is not a network device.

Is the LAN connected to Internet?


A LAN does not require Internet access

, however, and its sole purpose can be to transfer files easily between computers that are within close, relative proximity to one another, or to share printers, fax machines or other hardware.

Which of the following computer networks is built on the top of another network?

Which of the following computer networks is built on the top of another network? Explanation:

An overlay network

is a computer network that is built on top of another network.

What is Layer 2 ethereum?

Layer 2 is

a collective term for solutions designed to help scale your application by handling transactions off the Ethereum Mainnet

(layer 1) while taking advantage of the robust decentralized security model of Mainnet. … This can make using Ethereum very expensive.

What is computer in a LAN called?


A local area network

(LAN) is a computer network that interconnects computers within a limited area such as a residence, school, laboratory, university campus or office building. … Ethernet and Wi-Fi are the two most common technologies in use for local area networks.

Which of the following is an example of Bluetooth?

Que. Bluetooth is an example of b. local area network c. virtual private network d. none of the mentioned Answer:

personal area network

Which of the following terms is just the collection of networks that can be joined together?


Intranet

is the collection of networks that can be joined together.

What is the old name of Internet?

This eventually led to the formation of

the ARPANET (Advanced Research Projects Agency Network)

, the network that ultimately evolved into what we now know as the Internet. ARPANET was a great success but membership was limited to certain academic and research organizations who had contracts with the Defense Department.

What does LAN stand for?

A

local area network

(LAN) consists of a series of computers linked together to form a network in a circumscribed location. The computers in a LAN connect to each other via TCP/IP ethernet or Wi-Fi.

What is repeater router?

A Wi-Fi repeater, extender, or booster is

a device that forwards wireless signals from the router to cover a larger area

, such as multiple floors of a house. The repeater creates a new network based on signals from the originating network, and the clients that connect to the repeater are thus on a separate network.

What is a WIFI hub?

A wireless router, also known as a Wi-Fi hub, is

the small electronic device supplied by your internet service provider that allows you to connect to the internet

. It connects to your home broadband line and sends data from the internet cable to your internet-connected devices.

How is LAN different from WAN?

LAN has a higher data transfer rate whereas

WAN has a lower data transfer rate

. LAN is a computer network that covers a small geographic area, like a home, office, or group of buildings, while WAN is a computer network that covers a broader area. The speed of LAN is high whereas the speed of WAN is slower than LAN.

What are the three common types of computer networks?


LAN, MAN, and WAN

are the three major types of networks designed to operate over the area they cover.

Charlene Dyck
Author
Charlene Dyck
Charlene is a software developer and technology expert with a degree in computer science. She has worked for major tech companies and has a keen understanding of how computers and electronics work. Sarah is also an advocate for digital privacy and security.