We repair our entire current product portfolio as well as a large selection of historical products
. If your product is not listed in the form below or you are unsure, please contact our customer service.
Does Zeiss have a lifetime warranty?
Every product we make is backed by an industry leading,
limited lifetime, transferable warranty
(www.zeiss.com/us/warranty).
How do you service binoculars?
Binoculars can also be serviced, where they will be
completely stripped down to be thoroughly cleaned both inside and out, new lubricants put on all moving parts and then sealed up once again
. Any small repairs will also be carried out as well as checking for any collimation issues.
Where is the serial number on Zeiss binoculars?
On the binoculars of the VICTORY Pocket models you will find the serial number
on the bottom between the left tube and the hinge
. CONQUEST HD binoculars: On the binoculars of the Conquest HD models you will find the serial number on the bottom inside the centre of the hinge.
How do you know if binoculars are out of collimation?
How do I fix my binocular lens?
How do I return Zeiss binoculars?
ZEISS will cover the cost to ship the repaired or replaced product back to the owner via standard ground delivery.
Claims can be initiated on-line at www.zeiss.com/us/service, or by calling ZEISS Sports Optics Customer Service at 1-800-441-3005
.
How long is Zeiss warranty?
Every product we make is backed by an industry leading,
limited lifetime
, transferable warranty (www.zeiss.com/us/warranty).
What is the warranty on Swarovski binoculars?
Swarovski Optik offers a
fully transferable Limited Lifetime Warranty against factory defects
. If the problem or damage is caused by the owner, there may be some costs involved, although this is not always the case.
How do you clean Zeiss binoculars?
All mechanical surfaces of the system can be cleaned by
wiping them with a damp cloth
. Do not use any aggressive or abrasive cleaning agents. Clean off any residue using a mixture of 50 % ethyl alcohol and 50 % distilled water plus a dash of household dish-washing liquid.
How do you reset binoculars?
How do you fix blurry binoculars?
Open the eye that was closed, and shut the other eye. Look at the same object, and turn the diopter ring until the subject is clearly focused. Now, open both eyes and look through the binoculars at the same object. It should be clear and crisp, which means your binoculars are now calibrated for your vision!
How can you tell if Zeiss binoculars are fake?
Are Carl Zeiss Jena binoculars any good?
The optical quality is good and although the edge performance is not great, the overall performance is very good
. The Minolta Standard 10×50 has a field of 7.8 degrees and may weigh a bit less. The Zeiss is more durable than the Minolta.
Do Zeiss scopes have serial numbers?
Zeiss West serial numbers were assigned per model
and while they still have records and will answer when asked nicely, there is no public database of those.
What is collimation binocular error?
As far as binoculars are concerned, collimation means that
the images from the two optical tubes must merge within very tight tolerances
. The night sky is very demanding of optical systems, so a slight misalignment that you may not notice in daylight can become especially apparent under the stars.
How do you collimate binoculars Skymaster?
Why do I see double when looking through binoculars?
Double vision
usually indicates that the binoculars are out of collimation
. Now, what is collimation? It is the process of aligning all components in both lenses of binoculars to bring light to its best focus. If this process somehow gets interrupted, the binoculars register different images on each side.
How do you disassemble a binocular eyepiece?
- Turn and remove the protective ring on the lens or the cap on the front end lens of the binoculars. …
- Unscrew the retaining lens with a spanner wrench. …
- Loosen the eccentric ring with a jeweler’s straight slot screw driver that is no larger than 1.5 mm.
How do you fix Double Vision with binoculars?
In order to adjust the vertical,
adjust the screw closest to the objective lens
. When finished, if you pried up the rubber to get to the screws, use some quality rubber glue if your rubber won’t snap back over them. If you cut open the rubber grip just over the screws you should be fine.
Why won’t my binoculars focus?
If the image is blurry when you look with your left eye, it means that
you need to adjust the focusing ring, in the center of your binoculars
. The focusing ring puts the object that you’re looking at in focus while the diopter on the right eyepiece compensates for the differences between your left and right eye.
What rifle scopes have a lifetime warranty?
Built for a lifetime of performance – if at any time your
Leupold riflescope, mounts, red dot, binocular, or spotting scope
doesn’t perform, we will repair or replace it for free – whether you’re the original owner or not.
