The easiest way to find replacement lawn mower blades is
with the OEM number
. The OEM number is the numerical part number of the blade assigned by the manufacturer. In most cases, just typing this number with the manufacturer name into a search engine or online store will be enough to bring up some promising results.
Are all riding mower blades interchangeable?
In short,
the answer is yes
. However, you must ensure that the centre hole and length of the blade is the same as the one you are replacing.
What size blades go on a 42 inch deck?
AYP Blade fits 42′′ Cut Decks.
AYP Blade fits 42′′ Cut Decks, needs two blades. Size:
Length: 21′′, Center Hole: 5/8′′Star, Width-thickness: 225-149
. Replaces # 127843, 138498, 131323, 138791 & 532127843. {Blades are sold individually} If you purchase 10 of these blades you get FREE SHIPPING.
Are riding mower blades universal?
So, are lawn mower blades universal?
Lawnmower blades are not universal
, they are mower specific. A mower blade must be an exact fit and torqued to the manufacturer's specification.
Are all lawn mower blades the same size?
Mower blades can be 1 1/2′′ to 4 1/4′′ in width, and are available in thicknesses ranging from about 1/10′′ to almost 1/3′′. [Back to top] Number of Holes Lawn mower blades will have either one or three holes in them for where they attach to the machine.
What size are my mower blades?
LENGTH:
Length is measured diagonally from one tip of the blade to the opposite tip of the blade
. It is important to measure the length correctly. Measuring from end to end will result in the wrong blade length. All length measurements must be made diagonally.
Can I use any brand mower blade?
No, lawn mower blades are not universal, they are mower-specific
. You can replace a certain manufacturer's blades with another manufacturer's blade, provided that they match up with your mower in length, thickness, width, hole numbers, hole shapes, and hole sizes.
Are lawnmower blades standard?
Most mowers will come with a regular blade fitted as standard
, until you went out and bought a mulching mower.
How do you install a universal lawn mower blade?
How do I know what size mower deck I have?
- Measure the actual mower deck size using a tape measurer and extend the tape from the widest point on one side of the deck to the opposite side of the deck. …
- The average riding lawn mower, also referred to as a garden tractor, is between 48 inches and 63 inches wide with the discharge chute in the upright position.
What size blades do I need for a 54 deck?
AYP Gator Mulching 3-in-1 Blade fits 54′′ Cut Decks, needs
three blades
. Size: Length: 18-1/2′′, Center Hole: 5/8′′Star, Width-thickness: 250-187. Replaces # 187254. {Blades are sold individually} If you purchase 6 of these blades you get FREE SHIPPING.
What size blades do I need for a 52 inch deck?
2 Blades Required for 36′′ &
3 Blades
Required for 52′′ Cut.
What is a 3 in 1 mower blade?
In order to emphasize their greater versatility,
mulching blades
often are called 3-in-1 blades because they can perform three jobs instead of just two. They are able to discharge or bag clippings, and they can chop them into a fine mulch and leave them on the lawn.
Can you mix lawn mower blades?
Well,
it depends
. Lawn mower blades are mower specific and not universal. But most manufacturers have multiple types that will fit your mower.
Are lawn mower blades the same?
Final Thoughts. When you need to replace your lawn mower blades, you may wonder if they are universal. The fact is that
they are not
. Different lawn mowers use different blades, and you will need to know the make and model of your mower to know what type of blade you need.
What is a 4 in 1 mower blade?
Eliminator Blades cross cut for quick shredding and mulching
. Replace your mower blade with a 4-in-1 Eliminator blade for Mulching, Discharge and Bagging plus shredding to ensure a clean, healthy cut for beautiful lawn results.
How many blades does a riding lawn mower have?
How many blades are there on a rider mower? It depends on the model.
Most riding mowers use a single long blade, but larger mowers sometimes use a pair of blades that may be anywhere from 6-32 inches (15-81 cm) in length
.
How many blades does a lawn mower have?
The main parts of a cylinder or reel mower are: Blade reel/cylinder: Consists of numerous (
3 to 7
) helical blades that are attached to a rotating shaft.
Are all push mower blades the same?
Although a mower is restricted to using blades that correspond to a matching configuration of holes and measurements,
most mowers will still have several blade type options available that are compatible
. Lawn mower blade types employ different designs that offer a variety of “lift” and mulching options.
When should I replace my mower blades?
You'll know that you need to sharpen your lawn mower blades when the tips of your grass are brown and ragged. When this happens, your grass becomes less capable of storing water and more susceptible to disease. Some lawn mower manuals suggest sharpening or replacing blades
after every 25 hours of use
.
How do I know if I have a mulching blade?
The easiest way to tell the difference between mulching and standard lawn mower blades is to look at their shape. A standard blade will have fewer cutting edges and a straight shape, while
the mulching blade will have several cutting edges and a curved shape
.
Can you put a mulching blade on any mower?
The vast majority of mowers will accept mulching blades, but not all of them
. In order for a mulching blade to work with your current mower, it must be able to fit under the deck comfortably and be tightened securely.
What is a 2 in 1 mower blade?
Standard blades, sometimes referred to as 2-in-1 blades, are
designed to cut grass and then either discharge or bag the clippings
. Standard and high-lift blades are straight and aerodynamic as possible to create a powerful lift that will expel the grass clippings from under the deck.
