Where To Get Skateboard Wheels?

Skateboard wheels cost anywhere

between $10 and $50 or even higher

depending on the brand, quality, size, and durometer rating.

Are skateboard wheels sold individually?

Skateboard wheels come in sets of four and require eight bearings (

sold separately

) to properly function.

Can you replace wheels on a skateboard?

What skateboard wheels are best for street?

A lower millimeter wheel

is usually preferred for street skating, as they are lighter for flip tricks but more difficult to ride on rougher surfaces. The most popular street skating wheel sizes are between 52-54mm. A larger wheel helps you skate rougher ground and ride up transitions easier.

Are 52mm wheels good for street?

Small 51mm – 52mm wheels

This is a great size for starting out, particularly for younger skaters.

Wheels of this size are suitable for any type of street and transition skateboarding

. They won’t pick up too much speed when learning to ride down hills.

How hard are skateboard wheels?

Skateboard wheels are made from polyurethane (PU) and their hardness is measured in durometer.

Most range between 75a to 104a

. Any wheel in the 78a to 90a range is considered a soft wheel, 90a to 98a is in the middle, 99a+ is referred to as a hard wheel.

Are bigger skateboard wheels faster?

Larger wheels will give you a faster ride

while smaller wheels may slow you down. However, because they are lower to the ground and easier to control, smaller wheels are the best wheels for street skating.

Do skateboard wheels come with bearings?

Every skateboard wheel is equipped with two bearings

. If you want, you can fill the space between them with a spacer. This small metal cylinder prevents the bearings from being forced into the centre of the wheels when tightening the axle nut and getting damaged.

Are 99A wheels good for street?

96A-99A Skateboard Wheels

These are a fairly balanced set of wheels that

will adapt to street skating

, skatepark riding, bowls, ramps, and nearly all smooth surfaces. The setup is often used by beginners because it provides good grip and moderate speed characteristics.

Why do skaters put their wheels inside out?

How long do skate wheels last?

In general, the average lifespan of ordinary skateboard wheels is about

3 months

. That said, it may be impossible for us to determine the exact lifespan of a new skateboard wheel because there are factors to consider. Some wheels wear out faster while others last a little longer.

Are skateboard wheels supposed to spin?

Your skateboard wheels should be tight enough that they spin freely

. However, you don’t want the wheels so loose that they wiggle on the truck’s axle. To see if you need to tighten your wheels, put the board on its side, and flick the wheel as fast and as hard as you can with one hand.

Are Bones STF wheels good?

BONES STF wheels

outperform all other wheels

, and because they wear so well, they last several times longer than normal wheels, making STF wheels the best for less. BONES STF wheels are available in the original 103A and the new 99A Street Tech FormulaTM for greater roll, control and softer landings on rougher terrain.

Are soft wheels good for tricks?

The main difference between soft vs hard skateboard wheels is that soft wheels are better for cruising and maintaining a higher speed. While hard wheels are better balanced while remaining stationary, and

best for learning how to ollie and other beginner tricks

.

What wheels do pro street skaters use?

Most pro street skaters choose classics as they’re narrow and slide insanely well. However, some skaters like their wheels a little wider than classic. That’s why they may go for

conicals

. Conicals are wider and offer a little more grip and stability.

What wheels does Tony Hawk use?

BONES WHEELS SPF Pro Tony Hawk Talon Skateboard Wheels P5 Sidecut 60mm 104A 4pk

– BONES WHEELS.

What size wheels do I need for a 8.0 deck?

Is it easier to Ollie with smaller wheels?

Small wheels make it easier to land tricks, even when they feel a bit sketchy

. Bigger wheels will cause you to fall when you land a trick a bit sketchy but smaller wheels still allow you to land a trick without running the risk of hurting yourself.

What size wheels does Tony Hawk Ride?

Do bearings make you go faster?

Answer 1:

Ball bearings make skateboards (and anything else with wheels)go faster

because they reduce the friction between the wheels and their axles. In general >when things slide over each other, the friction between them causes a force that tends to slow them down.

What are the softest skateboard wheels?

Longboard wheels

are the softest wheels you can ride on. They range between 75a to 85a on the durometer scale. Now, 75a is super soft, and 85a is just soft. Manufacturers design these wheels for use over all sorts of pavements.

Are ABEC 11 bearings real?

ABEC from a precision standpoint refers to the Annular Bearing Engineering Committee (ABEC) of the American Bearing Manufacturers Association (ABMA). ABEC precision levels do indeed stop at level 9 (

there is no ABEC 11 precision level

).

Do pros use bearing spacers?

Bearing spacers are totally optional

; longboarders and casual skaters likely won’t put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard.

Are speed rings necessary?

Speed Rings are an often overlooked part of your skateboard, but

not having them could be greatly jeopardizing your performance

! Speed rings go on the outside of your bearings to give more clearance, allowing an uninhibited continuous roll.