Well, if you use Newton’s second law, force equals mass times acceleration, and since you’re dealing with gravity, that acceleration will be g. And so, we’ll calculate weight as mass times g. And therefore, in our example, the pressure will be
m g, divided by the area
.
How do you find weight from pressure and area?
For example, if you push on an object with your hand with a force of 20 pounds, and the area of your hand is 10 square inches, then the pressure you are exerting is 20 / 10 = 2
pounds per square inch
.
How do you convert pressure to weight?
PSI is a unit of measure for pressure, and pressure (PSI) is the amount of force (lbf) applied per unit of area (in2). The equations below illustrate this. To convert PSI to lbs,
simply multiply the pressure by the area over which the force is applied.
How do you find weight from area?
- Calculate weight in kilograms: 210 pounds ÷ 2.2 = 95.45 kg.
- Calculate height in centimeters: 6 feet, 3 inches = 75 inches x 2.54 cm/inch = 190.5 cm.
- Multiply height by weight and divide by 3600. (190.5 cm x 95.45 kg) ÷ 3600 = 5.
- Take the square root of 5 = 2.24 m
2
How do you calculate force with pressure and area?
Pressure and force are related, and so you can calculate one if you know the other by using the physics equation,
P = F/A
. Because pressure is force divided by area, its meter-kilogram-second (MKS) units are newtons per square meter, or N/m
2
.
What is area formula?
| Table 2. Area Formulas | Shape Formula Variables | Square A =s2 s is the length of the side of the square. | Rectangle A=LW L and W are the lengths of the rectangle’s sides (length and width). | Triangle A=12bh b and h are the base and height |
|---|
What is the formula for weight?
Weight is a measure of the force of gravity pulling down on an object. It depends on the object’s mass and the acceleration due to gravity, which is 9.8 m/s
2
on Earth. The formula for calculating weight is
F = m × 9.8 m/s
2
, where F is the object’s weight in Newtons (N) and m is the object’s mass in kilograms.
How do you find the weight if you have the density and area?
You can determine its weight simply
by multiplying the density by the size, or volume, of the item
. Write down the volume and the density of the item you’re measuring.
What is pressure and how is it calculated?
Pressure is defined as
the force divided by the area perpendicular to the force over which the force is applied
, or. P=FA. A given force can have a significantly different effect depending on the area over which the force is exerted, as shown in Figure 1.
What is pressure force and area?
Pressure is a measure of how much force is acting upon an area. Pressure can be found using the
equation pressure = force / area
. Therefore, a force acting over a smaller area will create more pressure.
What is formula of stress?
The stress equation is:
σ = F/A
.
F
denotes the force acting on a body and A denotes the area. Units of stress are the same as units of pressure – Pascals (symbol: Pa) or Newtons per squared meter. Positive stress means that the object is in tension – it “wants” to elongate.
What is work formula?
To express this concept mathematically, the work W is equal to the force f times the distance d, or
W = fd
. If the force is being exerted at an angle θ to the displacement, the work done is W = fd cos θ.
What is pressure a measure of?
Pressure is defined as
the amount of force (exerted by a liquid or gas) applied to a unit of “area” (P=F/A)
, and the common units of pressure are Pascal (Pa), Bar (bar), N/mm2 or psi (pounds per square inch).
How do you find pressure at the bottom of a tank?
In the case of the water stored in a tank, the pressure at its bottom is the weight acting on a unit area of the surface where the tank is kept. To translate that into an equation:
Pressure = weight/area, and weight = mass (m) * acceleration due to gravity (g)
. This means pressure = m * g/ area.
