ATF MV is a high performance
fully synthetic, high quality automatic transmission fluid
manufactured for multi-vehicle automatic transmissions.
What does MV stand for in transmission fluid?
Mercon V
is Mercon V. in Mazda speak, MV is the equivalant of FNR5 fluid, they are not compatible, and we have seen complete trans failures due to the use of Mercon V in a MV application. C.
What is Mazda ATF MV?
Mazda Automatic Transmission Fluid
[ATF M-V (Type M5)]
The fluid is a highly specialized oil optimized for the special requirements of a transmission, such as valve operation, brake band friction and the torque converter as well as gear lubrication. Details. Excellent oxidation and thermal stability.
What is compatible with ATF MV?
It is suitable for use in automatic transmissions calling for
GM DEXRON® II/III/IIE/IIIH, Allison C-3 & C-4
, CAT TO-2, Ford MERCON®LV, Chrysler ATF+3 +4, Honda Z-1, DW-1, Hyundai/Kia SP-II/III/IV, JASO 1A, 2A, Nissan Matic Fluids, Toyota T-III, T-IV, WS and many other American, Asian and European OEM’s performance …
Is ATF MV the same as Mercon V?
NOTE:
ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V
OR MERCON®LV ATF. ATF M-V (TYPE M5) HAS A GREATER VISCOSITY THAN MERCON®V AND MERCON®LV ATF IN LOW TEMPERATURES. … TRANSMISSION FLUID FLUSHING SHOULD ONLY BE PERFORMED WHEN INSTRUCTED BY THE WORKSHOP MANUAL OR ANY OTHER MAZDA PUBLICATION.
What is in ATF fluid?
While traditional transmission fluid is made from
crude oil
and the reshaping of hydrocarbons for specifications of different vehicles, synthetic transmission fluid is created through different chemical reactions. This type of transmission oil is less likely to break down, oxidize or thin out in high temperatures.
Does Mazda recommend transmission flush?
All Mazda vehicles equipped with SKYACTIV
®
TECHNOLOGY
*
have lifetime transmission fluid that only needs to be changed when a major transmission component
or the entire transmission needs replacement.
Should I use OEM transmission fluid?
The only time to use a Genuine fluid is
if it’s still under warranty and you don’t have to pay for it
. … These are exact same as Genuine fluid but are a much better value. If your car is more than 3 or 4 years old select an OEM part when the repair is not covered under warranty and you have to pay for it yourself.
What is ATF m3?
Mabanol Radon Gear ATF III MV is
an automatic transmission fluid
which complies with Ford Mercon V as well as the General Motors standards Dexron. It can be equally used in automatic trans- missions of passenger cars and heavy-duty vehi- cles as well as in steering systems.
What kind of transmission fluid does Mazda 3 take?
Valvoline MaxLife Synthetic Transmission Fluid Multi-Vehicle
1 Quart.
Can I use ATF instead of ATF 4?
ATF +4 is a synthetic fluid for finely-tuned transmissions, so if you use a
non-synthetic ATF
instead of ATF +4 in a car or truck that calls for it, you could damage the transmission. You may use ATF +4 in most applications that call for older Dexron and Mercon fluids.
Can I use Dexron 3 instead of T IV?
The T-IV is a different type and is
not a substitute
for Dexron II or III.
What type of ATF fluid do I need?
Dexron III/Mercon
– This is one of the most common fluids on the market. Most GM and Ford units call for this type of ATF, as well as many imports. If your owners manual recommends any form of Dexron, or any Mercon – other than Mercon V – this is the fluid you want.
Is Pennzoil transmission fluid good?
Pennzoil
®
Automatic Transmission Fluid (ATF) is a
high-quality automatic transmission
fluid that provides consistent, reliable, and smooth operation of transmission systems requiring the performance levels listed below, generally used in older passenger cars.
Is M5 mercon 5?
ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V ATF. ATF M-V (TYPE M5) HAS A GREATER VISCOSITY THAN MERCON®V ATF IN LOW TEMPERATURES. … USE MERCON®V MAY CAUSE TRANSMISSION DAMAGE.
What kind of transmission fluid does a 2012 Mazda 3 take?
The type of transmission fluid that should be used in the 2012 Mazda3 is
Mazda FZ-ATF or DEXRON VI
. The capacity for the vehicle iS6. 1 pints for the manual and 3.7 quarts for an initial fill oR8. 2 quarts for a total fill for the automatic transmission.
