Wait until you can see clearly around the first train in both directions. Never walk around or behind lowered gates at a crossing. Do not cross the tracks
until the lights have stopped flashing
and it is safe to do so. You can be fined for failure to obey these signals.
What must you be certain of when crossing railroad tracks?
Flashing red lights at a railroad crossing mean
STOP
! A full stop is always required. Make sure that there is no train traveling on the tracks and proceed.
What is the proper procedure for crossing railroad tracks?
- GET OUT IMMEDIATELY. Evacuate your vehicle. …
- Move away. Walk toward the oncoming train, and away from the tracks at a 45-degree angle. …
- Locate the emergency phone number. …
- Call for help!
When at a railroad or train crossing What should you do first?
Get yourself and any other passengers out of the vehicle immediately
. If a train is coming, get out immediately and move quickly toward the oncoming train and away from the tracks at a 45-degree angle. This is to protect you if the train does hit your vehicle.
What is the appropriate action to take when approaching a railroad?
Explanation When approaching an unmarked railroad crossing,
slow down and be prepared to stop
. Before you cross, be sure that no trains are approaching from either direction on any track. If you see or hear a train coming, stop at a safe distance from the nearest track and wait to proceed until after the train passes.
Are you supposed to stop before crossing railroad tracks?
Always stop before crossing railroad tracks when:
You are transporting two or more young children in a passenger vehicle
. Explanation Expect a train on any track, at any time, traveling in either direction. If you need to stop after crossing the tracks, wait until you can completely cross the tracks before proceeding.
What steps will you take when crossing railroad tracks quizlet?
When you come to any railroad crossing you
should always slow down
. You should stop on railroad tracks only if the vehicle ahead of you has stopped. Always wait for the vehicle ahead of you to clear the tracks before you start across. Never stopped on the railroad tracks.
When approaching a railroad crossing with flashing lights you must?
Explanation Any driver or pedestrian approaching a railroad crossing
must stop within 50 feet, but not less than 15 feet, from the nearest rail of the railroad
when warning lights are flashing, crossing gates are lowered, or drivers are otherwise instructed to stop.
What should you do when approaching a railroad crossing without mechanical gates or lights?
- Cross the tracks as quickly as possible.
- Slow down to 15 mph and be prepared to stop if necessary.
- Stop on the tracks and look both ways.
- Approach the railroad tracks at 25 mph.
What are 6 railroad crossing safety tips?
- Trains do not run on set schedules. …
- Always yield the right of way to the train. …
- Never ignore active warnings at crossings. …
- Trains will arrive at a crossing faster than you anticipate. …
- Look and listen when you see advance warning signs indicating a rail-highway crossing.
What is the appropriate action to take when approaching a railroad crossing that does not have signals such as lights or crossing gates quizlet?
Slow down and be prepared to stop
. Do nothing; all railroad crossings have signals. Increase speed to get across the tracks quickly.
What is the appropriate action to take when approaching a railroad crossing that does not have signals quizlet?
What is the appropriate action to take when approaching a railroad crossing that does not have signals to direct traffic?
Slow down and be prepared to stop.
What action should you take when approaching a railroad crossing quizlet?
Terms in this set (5) Railroad crossings are always dangerous.
Drivers should listen and look both ways for an approaching train, and for signals indicating an approaching train
. Never proceed until you are certain it is safe to do so.
Who must always stop before crossing railroad tracks?
Explanation
Trucks transporting hazardous loads
must stop before they cross railroad tracks.
Which vehicles must stop before railroad tracks?
Watch for vehicles that must stop before crossing railroad tracks. Be prepared to stop when you are following
buses, school buses, and large trucks carrying hazardous loads
, whether or not there is an approaching train at the crossing.
What should you do as you approach a Crossbuck?
Crossbuck signs indicate
there is a railroad crossing
. They should be treated similar to yield signs. If a train is approaching, the driver should never try to beat the train across the tracks. Instead, they should stop and wait for it to pass.
What are five 5 things to remember when you approach a railroad crossing?
- The cross buck sign means yield. Trains must be given the right-of-way at all times! …
- Always expect a train. …
- Trains cannot stop quickly. …
- Do not try to beat the train. …
- Never drive around lowered gates. …
- Do not get trapped on the tracks. …
- Look for a second train.
When approaching a railroad crossing with no signal lights or crossing gates you should?
Explanation
Always be prepared to yield to any oncoming trains
before crossing railroad tracks, particularly if there are no lights or gates controlling the crossing. Never start to cross the tracks until there is room for your entire vehicle on the other side of the tracks.
What is the first step you should take in order to pass safely?
- Scan for hazards, e.g., oncoming vehicles, vehicles approaching from rear, merging vehicles;
- Check for blind spots;
- Signal your intention and accelerate into passing lane;
- Accelerate quickly to an appropriate speed;
- Concentrate on the path ahead;
Which of the following are clues that you are approaching an intersection?
- Street lights and signs.
- Roadway markings (turn lanes/crosswalks)
- Stopping or turning traffic.
- Pedestrians.
- Rows of fences or mailboxes.
- Power lines crossing over the street.
- Curb bending away/ending.
When an emergency vehicle comes up behind you you should ______?
When an emergency vehicle is approaching:
Pull over to the edge of the roadway
, clear of intersections, and stop. Remain there until the emergency vehicle has passed. Watch for others.
When approaching a bicyclist from the rear you should slow down and?
When approaching a bicyclist from the rear, you should slow down and:
Wait until it is safe to pass the bicyclist with at least three feet of clearance
. A green arrow showing at the same time as the red traffic light means: You may go in the direction of the arrow with caution.
When you are driving your vehicle catches fire under the hood?
Stop the car and turn off the ignition. Get every person out of the car, and don’t allow anyone to go back to retrieve personal items. Move far from the burning vehicle to avoid the flames and toxic fumes—at least 100 feet—and also keep bystanders back.
Call 911
.
When going downhill you should prepare to do what?
Anticipate and Prepare for Going Downhill
Shift into a lower gear
before the downgrade as well. To do so, shift into “2” or “L” if your vehicle has an automatic transmission, and stay in a lower gear if it’s a manual. This will allow the slowing power from your engine to slow the car down.
What does exempt mean at railroad crossings?
Exempt signs are intended to inform drivers of commercial motor vehicles transporting passengers or hazardous materials that
a stop is not required at certain designated railroad crossings
, except when rail traffic is approaching or occupying the crossing or the driver’s view is blocked.
What two types of vehicles must stop at railroad crossings?
- Trucks carrying dangerous goods.
- Buses.
- School buses.
When you are approaching a railroad crossing and there are no safety barriers you should?
If you are approaching a railroad crossing that has no safety barrier,
cross the tracks only after checking in both directions for any oncoming trains
. If a train is approaching, come to a complete stop at a safe distance and wait for the train to pass. Never try to outdrive a train.
What should you do when the car behind you begins to pass you?
When the driver behind you wants to pass, you
should slow down
so that there is enough room in front of your vehicle for the other driver to complete their pass. This will allow them to complete the passing maneuver in less time and more easily.
What vehicles must stop at all railroad crossings quizlet?
What vehicles MUST stop at railroad crossings?
All school buses and some school activity vehicles
. If you’re behind one of these vehicles, be prepared to stop. Other vehicles and large trucks may also be required to stop.
When approaching a railroad crossing you should *?
Slow Down
Firstly, you should slow down when approaching a railroad grade crossing. You must look around for clues that a train is on its way.
What is the appropriate action to take when approaching a railroad that does not have signals to direct traffic?
What is the appropriate action to take when approaching a railroad crossing that does not have signals to direct traffic?
Always bring the car to a complete stop. Slow down and be prepared to stop
. All railroad crossings have signals so you will never encounter this situation.
Is an approaching train is near enough to be a danger you must?
Explanation You should look and listen for trains before crossing any railroad tracks. If an approaching train is near enough or going fast enough to be a danger,
you cannot go across the tracks
. This is true even if they have no signals or the signals are not working.
When should you increase your following distance?
The
three-second rule
is recommended for passenger vehicles during ideal road and weather conditions. Slow down and increase your following distance even more during adverse weather conditions or when visibility is reduced. Also increase your following distance if you are driving a larger vehicle or towing a trailer.
When you have the right of way when you are?
You have the right-of-way when you are:
Already within a traffic circle
. Explanation A driver who enters a traffic circle or rotary must yield the right-of-way to drivers already in the circle. Vehicles entering a roadway from a driveway must yield the right-of-way to pedestrians and to vehicles already in the road.
Do semi trucks have to stop at railroad crossings?
A truck carrying any quantity of Division 2.3 chlorine, hazardous material as defined in the Hazardous Materials Regulations of the United States Department of Transportation (DOT)
must stop at railroad crossings
.
A truck carrying any cargo with a temperature above its flashpoint
must stop at railroad crossings.