Just use the
HDMI 1 port
on the back of your TV. Connect the other end of the cable to your receiver. You’re looking for something labeled HDMI Out; it’s usually a different color. If necessary, connect a digital optical cable to the back of your TV (optical out), and the other end to your receiver (optical in).
How do I connect my Yamaha sound system to my TV?
- Turn OFF both devices.
- Plug the optical cable in TV output and soundbar input.
- Select optical as audio output source on TV.
- Select Optical as input on soundbar.
- Play something and enjoy.
How do I get my TV to play through my surround sound?
- Connect an HDMI cable to the HDMI ports labeled ARC, or the port identified in your manual that supports ARC.
- Set Speakers to Audio system. The steps below are an example on Android TV or Google TV. …
- Turn on the Control for HDMI setting on both the TV and the receiver or home theater system.
How do I connect my old Yamaha receiver to my new TV?
Your TV has analog audio outputs via a mini jack so all you need to do is connect all your sources to the TV (with HDMI etc) and connect the TV audio out to any input on the receiver (except phono). You will need an
audio cable with
a stereo mini plug on one end and a pair of RCA connectors at the other.
Why won’t my surround sound connect to my TV?
Make sure that
Control
for HDMI or BRAVIA Sync of your TV and audio device is set to ON. Make sure that the ARC feature of your audio device is set to ON or AUTO. Verify that sound is output from the TV after turning on the TV and then the audio device. Make sure that your audio device is set to TV input.
How do I get my Yamaha soundbar to turn on with my TV?
- Connect the HDMI Out (ARC) of the Yamaha Sound bar to the ARC connection on the TV. …
- Enable the HDMI control function of the unit to activate the ARC. …
- Check the setup menu of the TV to verify that ARC (HDMI CEC Control) is enabled.
How can I connect my surround sound to my TV without a receiver?
You can also add speakers to the TV without a receiver is the
3.5 to 3.5mm audio cable
. This is pretty easy to do as the first step is to switch the audio source back to source number one. Then take the first end of the cable and plug it in the auxiliary port.
How do I connect my surround sound to my TV without HDMI?
Whether it’s your TV, your receiver, or both devices that don’t have HDMI connections available, you can use
an RCA cable and/or a converter
to connect the two. You’re never more than a few cables away from getting the sound off your Television and into your sound system.
How do I hook up my old stereo to my new TV?
Your simplest option is to pick up a
small external box called an HDMI audio extractor
, which isn’t hard to find online or at electronics retailers. It splits out the audio portion of an HDMI signal and gives you a set of audio outputs – usually RCA connectors – that you can connect to your stereo.
How do I connect my Yamaha receiver?
- Press the BLUETOOTH button on the remote.
- Press and hold the MEMORY button on the remote for 3 seconds. …
- Access the Bluetooth function on the mobile device (phone, tablet, etc.)
- Select the Yamaha receiver.
Why does my surround speaker not work?
Try selecting a different size (small or large) for the rear surround speakers in the menu.
Verify that the A/V receiver is set to a surround sound mode
. IMPORTANT: … If your source is a DVD or Blu-ray Disc® player, verify that the surround sound is enabled in the menu for the player itself.
Can you use HDMI and optical audio at the same time?
From box both HDMI and
optical can take in same time
.
Why is my surround sound not working?
Try different cables
to verify this is not a bad set of cables. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. … Check each speaker to make sure they are properly connected to the A/V receiver. Perform a Test Tone function to verify if the speakers are working correctly.
Does HDMI carry surround sound?
Fiber optical cables support surround sound with up to 5.1 channels. While
HDMI supports Dolby Digital Plus, TrueHD formats, and DTS HD
. Almost all the television programming gets broadcast in surround sound but there are many Blu-ray discs offering enhanced sound quality.
How do I pair my Yamaha sound bar?
- Press the Bluetooth button on the Yamaha remote. The BLUETOOTH indicator on the sound bar will flash.
- On the mobile device (Bluetooth device) access the Bluetooth settings.
- On the mobile device (Bluetooth device) select the Yamaha sound bar. * *“Yamaha YAS-109” is displayed in the list.
How do I connect my wired speakers to my TV?
- At the rear of your TV or cable box, find the color-coded audio output jacks. …
- Plug the red RCA audio cable into your TV’s red RCA audio jack and plug the white RCA audio cable into your white RCA audio jack. …
- Switch on your TV and, one by one, check each speaker.
How do you hook up wall speakers to a TV?
Connection Cable
You can wire an
analog cable from your TV
to the amplifier and plug it in, set your TV to line output and you’ll enjoy TV sound through your ceiling speaker system! Two things to watch out for 1) Most modern TV’s are now dropping the analog output, most commonly the 3.5mm headphone jack.
How do I connect my old Kenwood receiver to my new TV?
- Turn off your TV and Kenwood receiver. …
- Locate the audio output ports on your TV. …
- Connect the appropriate cable to the audio output port on your TV.
- Locate an appropriate input on your Kenwood receiver. …
- Plug the other end of the cable into the input on your receiver.
How do I connect speakers to my Smart TV?
If your TV doesn’t use RCA connectors for audio output, it may have a
headphone out port (3.5mm port)
. You can use this to connect your TV to the speakers. They’re the same connector used on phones, tablets, laptops, etc. For this, you’ll need to use a 3.5mm audio jack on the TV end and a RCA jack on the speaker end.
How do you hook up surround sound without optical?
There are many ways to avoid using HDMI or optical connections. You can
connect wirelessly with Bluetooth
, or use a 3.5 mm AUX cable, RCA cables, or even an auxiliary device that converts coaxial cable to another kind of connection.
How do I convert my old stereo to wireless?
If you have a traditional stereo amplifier or receiver it is easy to make it Bluetooth capable with a
Bluetooth adapter
. You simply connect the adapter to one of the LINE level inputs on the amplifier/receiver using the RCA female cable that is included with the adapter.
What is PCM audio?
PCM: This stands for “
pulse-code modulation
.” Use this setting if the external device you’ve connected to the HDMI port has already processed the sound, and you just want it to come out of your TV’s speakers.
How do I get my TV to play sound through my stereo?
- HDMI connection using the Audio Return Channel (ARC) feature.
- Connection using Coaxial Digital Cable, Optical Digital Cable, or Audio Cable.
What is ARC HDMI?
What is HDMI ARC? Most Samsung TVs support the HDMI feature called
Audio Return Channel
. HDMI ARC is designed to reduce the number of cables between your TV and an external Home Theatre System or Soundbar. … In other words, you don’t need a second optical/audio cable connected to an HDMI ARC compatible speaker.
How do I connect my Yamaha natural sound receiver?
- Press the BLUETOOTH source button on the remote for more than 3 seconds to enter pairing mode. …
- Turn on the Bluetooth function on your smartphone or tablet to pair with the receiver.
- From the Bluetooth connection list on your device, select Yamaha.
Do Yamaha receivers have Bluetooth?
The Yamaha RX-V383BL Receiver is
capable of pairing with Bluetooth-enabled devices
, which allows you to stream music from them. Bluetooth is the most common type of wireless technology used to connect devices over short distances.
How do I get my 5.1 surround sound to work?
Press
Windows key + R and type “mmsys
.
Hit Enter to open the Sound dialog box. Go to the Playback tab, select your 5.1 surround speakers and click on Properties. Next, go to the Advanced tab and use the drop-down menu below Default Format to change the audio format to 24 bit, 96000 Hz (Studio Quality).
How do I get my 5.1 speakers to work?
Check Your PC’s Sound Settings
Right-click the speaker icon on the right-hand corner of your screen and select “Sounds.” Click on “Playback.” Find your 5.1 speakers on the list, right-click on the icon and select “Set as default device.” Click on the speaker again and hit “Configure.”
How do I connect my Yamaha speakers?
- Open the App Drawer.
- Go to Settings.
- Tap Bluetooth. You may need to select Connections first.
- Ensure Bluetooth is On and then select your device from the list below.
Why is my Yamaha surround sound not working?
First, power off the AV Receiver/Sound Bar and TV,
disconnect all the HDMI cables
, and unplug the power cables. … Check the setting of HDMI Control on the TV. Please check the setting of the synchronized operations is “ON” and the TV is set to output audio from the external speakers.