noun. 1
A cutting blade or other device positioned at the side of a tool
, machine, etc. 2(In plural) a pair of strong blades incorporated into a pair of pliers, typically used for cutting wire; (also) a pair of hand-held clippers having such blades, used only for cutting wire, sheet metal, etc.
What is the use of a side cutter?
Side cutters are
used on wire and the leads of electronic components, as well as to strip insulation
. Stripping refers to safely removing the outer layer without damaging the conductors underneath. If they do get nicked, the connection may break or it could cause an electrical short circuit.
What is aside cutter?
Side Cutters for Electronics Work
Side cutters are
used to cut wire and the leads (or legs) of components in electronics
. They can also be used to strip the insulation from wire. The video below shows small electronic side cutters being used to strip the insulation from the wires of a battery clip.
Why are they called side cutters?
The
plane defined by the cutting edges of the jaws intersects the joint rivet at an angle or “on a diagonal
“, hence the name.
What are side cutters called?
Whizzotech Diagonal Pliers
(Side Cutter)
They are known by several different names, such as side-cutters, diagonal cutters, “dikes,” or even “diags.” In the electrical trade, these cutters are used for cutting soft copper or aluminum electrical conductors.
Do pliers cut metal?
There are a number of pliers that are designed with a
cutting blade
that will allow you to cut metal or wire, including the standard model pliers. The cutting edge of the pliers is normally located in the back of the jaws and has a serated or sharpened edge, allowing you to cut the metal without too much trouble.
Whats the difference between a flush cutter and a side cutter?
The term “flush” means level or straight and on the same plane, so flush cutters cut a wire level. Side cutters or angle cutters, cut on an angle, meaning the
wire edge will be cut to one side
. The choice of use is totally up to you, the wire jewelry maker. … This is also known as “double cutting.”
What is the function of side cutter pliers?
Use the correct pliers or wire cutters for the job. Proper use of side cutting (lineman’s) pliers: Many applications including electrical, communications and construction work.
Use to grip, splice or cut wires, and strip insulation
.
Are pliers the same as wire cutters?
Remember that wire strippers are best for removing the insulation from wire, while
cutters are best for
(you guessed it) cutting wire. Pliers help you reach, bend, grab, cut, hold and loop wire, and crimpers are the best tool to join two pieces of ductile material together.
Are used to remove the inside bur which is left from cutting a pipe in two?
Reamers
are normally used to remove the inside bur left from cutting a pipe or tube.
What is the importance of pliers?
Pliers are
a hand tool used to hold objects firmly
, possibly developed from tongs used to handle hot metal in Bronze Age Europe. They are also useful for bending and compressing a wide range of materials.
Are diagonal pliers the same as side cutters?
Diagonal pliers are specifically used to cut wire. … The name given to these pliers differs also in other countries e.g. they are called snips in Ireland and the United Kingdom, but on the other hand, in Canada and Australia, they are called
side cutters
.
Can wire cutters cut through metal?
For the most basic application of cutting cables, you can use the
wire cutters to cut copper, brass, aluminium, iron and steel wire
. To protect you from being shocked by the electric cables you are working with; some wire cutters have insulated handles.
What does wire cutter look like?
Flush cut wire cutters (also called “combination” or “lineman’s pliers”) look like
an ordinary pair of pliers
but feature a pair of cutting blades flush to the outside edge and directly behind one of the plier’s gripping jaws.
