Kohler Co. warrants the cast iron components of products manufactured after February 10, 2000, to be free of defects in material and workmanship during normal residential use for as long as the original consumer purchaser owns his or her home.
How do I know which Kohler faucet I have?
- The model number is printed on a tag that is attached to the cold water supply line of the faucet.
- The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
- The model number, or part number, is typically preceded by “P/N.”
Can Kohler faucets be repaired?
Although Kohler faucets are made with the highest quality, like anything else with moving parts, they may need service from time to time.
Kohler faucets are designed for the homeowner to repair
. Installing new valves in a two handle faucet is something almost anyone can do!
How do you replace a Kohler faucet stem?
How do you take apart a Kohler faucet?
Slip a flat-head screwdriver under this oval tab to pop it off and reveal the hex nut. Use an Allen wrench to remove that nut and the handle. Next, twist the neck counterclockwise to remove it from the handle. Use an adjustable wrench to remove the kitchen faucet nut holding the cartridge down.
Do Kohler faucets have a lifetime guarantee?
Kohler faucets, both kitchen and bathroom fixtures, come with a limited lifetime warranty
that protects their components. The company ensures that all faucets manufactured after January 1, 1997, will be leak and drip-free during everyday residential use.
How do you remove a Kohler bathroom faucet without screws?
Locate & Remove The Button Or Cap
See if you can locate one on the top or side of the handle. If you find one, you can
use a flathead screwdriver to remove it
. Simply work it into the gap around the button or cap and work it around the button or cap, gently lifting as you go.
Where is the model number on a Kohler sink?
The model number is located
on the underside of the sink, either molded into the sink material or stamped with ink
. Typically the model number starts with a K, such as K-5942. In some cases, the model number is preceded by 97 or 87. For example, 975942 contains the model number 5942.
How do I know what bathroom faucet I have?
How do you fix a Kohler faucet?
How do you take apart a Kohler faucet head?
How do I stop my Kohler faucet from leaking?
Temporary leak solution:
Remove the aerator from the end of the spout and soak it in a 50/50 solution of warm water and white vinegar
. This solution will help break down any hard water build up that has occurred within the aerator. Rinse the aerator with water prior to reinstalling.
How do you fix a loose Kohler faucet handle?
- Turn off the water supply.
- Rotate the handle to the “ON” position.
- Using a 3/32′′ or 2.5 mm hex wrench, tighten the handle setscrew by turning it clockwise. …
- Rotate the handle to the “OFF” position.
- Turn on the water supply.
- Rotate the handle to the “ON” position to confirm proper operation.
How do I remove the bonnet from my Kohler faucet?
- Turn the water supply OFF.
- Turn the handle to the ON position to relieve pressure.
- Loosen the setscrew and remove the handle.
- Use a flat-blade screwdriver to lift and remove the bonnet from the faucet body.
- The valve is now accessible for servicing.
How do you remove a stuck faucet stem?
If the stem or nut is stuck, use some penetrating oil, and let it sit for about 15 minutes. Then, use the pliers to loosen the nut. Finish unscrewing the nut counterclockwise by hand and lift it up to remove it. You’ll now be able to see the faucet cartridge.
How do you take apart a Kohler single handle faucet?
- Turn off the water to the faucet.
- Remove the plug button from the handle (Fig. …
- Loosen the screw underneath the plug button to remove the handle (Fig. …
- Unscrew the bonnet counterclockwise to expose the valve and the mounting nut; the bonnet should remove easily by hand (Fig.
How do you remove a Kohler single handle bathroom faucet?
- Using a bladed screwdriver, gently pry off the plug button under the handle, taking care to protect all finished surfaces.
- Using a 1/8′′ hex wrench, loosen the setscrew securing the handle to the valve stem.
- Lift off the handle.
- Unthread the bonnet to expose the valve.
How do you remove a Kohler faucet spout?
How do I claim my KOHLER warranty?
TO OBTAIN WARRANTY SERVICE: Original retail consumer must
bring the engine to an authorized Kohler dealer found by visiting www.KohlerEngines.com or telephone 1-800-544-2444 (U.S.A. and Canada)
.
What faucets have lifetime warranty?
- Delta Faucets and Fixtures. …
- Moen Plumbing Fixtures. …
- Danze Plumbing Products. …
- American Standard Kitchen and Bathroom Fixtures. …
- ROHL Plumbing Fixtures. …
- KOHLER Plumbing Fixtures. …
- Jacuzzi Whirlpool Tubs and Fixtures. …
- Toto Plumbing Fixtures.
How do you take apart a bathroom faucet handle?
How do you fix a broken bathroom faucet handle?
How do you change a bathroom faucet cartridge?
How do I know if my sink is porcelain or enamel?
When it comes to appearance, porcelain and ceramic are almost impossible to tell apart. The best way to determine what your bathroom sink is made of is to
locate the model number and do some digging on the internet
.
What is my Kohler sink made of?
KOHLER® Enameled Cast Iron baths and sinks are built strong enough to withstand the test of time, no matter what. Made in Kohler, Wisconsin, all products are crafted from
at least 80% recycled material
and come with a Limited Lifetime Warranty so you can enjoy your favorite fixtures and designs with peace of mind.
What are Kohler bathroom sinks made of?
Enameled Cast Iron
The thickness of KOHLER
®
enamel provides outstanding protection against dents, chipping, and scratching while offering deep color integrity. Enameled cast iron is available in a wide variety of colors and can be formed into unique shapes.
