Type 3.
Extended initial attack on wildland fires
. IC walks the line between a manager and a ‘doer’ Resources may vary from several single resources to several task forces or strike teams. Some Command/General Staff positions (ie, Division Supervisor, Unit Leader), may be filled.
What is a Type 3 incident?
A Type 3 IMT or incident command organization
manages initial action incidents with a significant number of resources
, an extended attack incident until containment/control is achieved, or an expanding incident until transition to a Type 1 or 2 IMT. The incident may extend into multiple operational periods.
What’s a Type 3 fire?
Type 3 Incident
b) Type 3 organizations
manage initial attack fires with a significant number of resources
, an extended attack fire until containment/control is achieved, or an escaped fire until a Type 1 or 2 team assumes command. c) Initial briefing and closeout are more formal.
What is a Type 3 wildland firefighter?
Type 3. A
water tender
with a minimum pump capacity of 200 GPM. 1000-2500 gallon tank. GVWR greater than 26,000 pounds.
What is a Type 4 fire incident?
Examples include a vehicle fire,
an injured person
, or a police traffic stop. Characteristics of a Type 4 Incident are as follows: Resources: Command Staff and General Staff functions are activated (only if needed). Several single resources are required to mitigate the incident.
What is a Type 4 fire engine?
Type 4 Fire Engine
Type 4 are
used to drive over rough terrain
and weighs 26,000 lbs, but it sacrifices a smaller pump and less hose for a larger 750-gallon tank. The Type 4 standard of pumping is 50 US gallons per minute at a pressure of 100 pounds per square inch.
What is Type 2 fire?
The Firefighter Type 2 serves on a hand crew, engine crew, or helitack crew,
performing fire suppression and fuels management duties
in the most adverse climate, fuel, and terrain conditions.
What is a Type 2 incident?
This type of incident
extends beyond the capabilities for local control
and is expected to go into multiple operational periods. A Type 2 incident may require the response of resources out of area, including regional and/or national resources, to effectively manage the operations, command, and general staffing.
What is a Level 2 incident?
Level 2 incidents are
complex either in size, resources or risk
. They are characterised by the need for deployment of resources beyond initial response, or sectorisation of the incident, or establishment of functional sections due to the levels of complexity (eg operations and planning) or a combination of the above.
What is a Type 2 team?
A Type 2 IMT is
a self-contained, all-hazard or wildland team recognized at the national and state level
. They are coordinated through the state, the Geographic Area Coordination Center (GACC), or the National Interagency Fire Center (NIFC).
What is a Type 3 hand crew?
Handcrews are
diverse teams of career and temporary wildland firefighters
. The crews typically consist of 18 – 20 men and women but can also contain 4 to 6 and 8 to 10. These crews have the responsibilities of constructing firelines – strips of land cleared of flammable materials and dug down to mineral soil.
What is a Type 3 engine?
Type 3—
An engine that features a high-volume and high-pressure pump
. The GVWR is generally greater than 20,000 pounds. Type 4—A heavy engine with large water capacity. Chassis GVWR is in excess of 26,000 pounds. Type 5—Normally an initial attack engine on a medium duty chassis.
What is a Type 2 wildland firefighter?
The “Firefighter Type 2 (Crewmember)” forms the
backbone of our efforts to manage or suppress wildland fire
. These entry-level positions frequently work long days in hot, smoky conditions to build fire lines across rugged terrain with hand tools and chainsaws.
What is a 6 alarm fire?
There are 3 engines and a ladder added after each alarm
. 18 Engine companies, 6 Ladders, 1 Rescue, and at least one Battalion Chief are included in a 6th alarm.
What is a Type 1 incident?
Type 1 –
Most complex, requiring national resources for safe and effective management and operation
. … Often requires the activation of response resources from outside the local area. Type 3 – Incident needs exceed onsite capabilities and additional resources from the local area may be brought in to support the response.
What is a Type 1 fire engine?
Type 1 fire trucks are purposefully
designed to support
urban, rural and suburban departments because they carry all of the required NFPA firefighting equipment. These versatile vehicles are often the first on scene because they support both structural firefighting and initial Emergency Medical Service (EMS) response.
