What Goes First Drywall Or Flooring?

by | Last updated on January 24, 2024

, , , ,


Install before flooring

. Drywall gives your walls a smooth surface that you can paint or wallpaper to suit your taste. … When you're hanging drywall and installing new flooring, it's usually best to hang the drywall first and then save the floor for last.

Does drywall go down to the floor?


Always leave a 1/2-inch gap at the floor

. This allows for floor and wall expansion without cracking the drywall. It also helps prevents moisture wicking if the floor floods.

What comes first flooring or drywall?

In standard home construction, the contractor

installs the subfloor

before installing the drywall. In fact, the subfloor is one of the first features of construction, whereas drywall installation takes place toward the end of the project.

Should you tile floor before drywall?


Sheetrock should be up

, second coat taped, sanded, and preferrably atleast primed, if not painted, prior to installing the floor tile. … All that should be left when the tile floor goes in is to install the wood base.

Do baseboards go in before flooring?

Baseboards are

usually installed before flooring

with a reservation gap left at the bottom of the baseboards for the flooring to be slid underneath. The gap left under baseboards for flooring is dependent on the width of the flooring being installed.

Should drywall touch the concrete floor?


Drywall should definitely not touch concrete

as moisture will wick (ie flow up the surface as in a candle/lamp wick) into the drywall and encourage mold growth.

How do you layout drywall?

  1. 1 – Bound Edges should pair with Bound-Edges and Butts with Butts. The bound edge is the long edge of a sheet of drywall. …
  2. 2 – Hang Drywall Sheets Perpendicular to Studs. …
  3. 3 – Stager the Butt Joints. …
  4. 4 – Ceiling to Floor and Left to Right.

How do you seal a gap between drywall and floor?

  1. Remove the baseboard, if present, to expose the gap between the subfloor and the wall face. …
  2. Clean dust or debris from the gap between the wall and subfloor, using a vacuum fitted with a slant nozzle.
  3. Insert a tube of caulking into the caulk gun.

Does underlayment go under drywall?

You need

underlayment grade plywood

. Normally the drywall sits 1/2′′ above the floor to prevent wicking up of liquids.

Do walls go on top of subfloor?


The studs are erected over the subfloor

. Normally you just cut out up to the wall and then install your replacement piece of plywood. A lot depends on how bad and how far under the wall the damage is.

Do you install shower before drywall?

If you're unsure whether the drywall in your bathroom has such a membrane,

it is important to install one before you install your shower surround over drywall

.

What comes first carpet or trim?

You want

to install your trim before the carpet

. This will make it much easier to paint or stain the baseboards without worrying about dripping on or ruining the carpet. The good news is that people actually install carpeting and trim in either order, so there isn't any big reason to worry about it.

Do you paint or put flooring down first?

Most people think that painting should be done first to prevent any spills from marring brand-new flooring. However, experts agree that

new flooring should always be installed before you have any interior painting done

.

Can you install flooring without removing baseboards?


Installing hardwood floors without removing the baseboards is possible

, and it's a suitable option for other types of flooring as well. If your baseboards have been glued to the wall and would cause damage if you tried to remove them, it may be best to leave them.

What should I put between drywall and concrete?

The solution is covering concrete with a vapor barrier, which acts like a resistant cell membrane instead. With a shield in place, the drywall is safe. Typically, a

stud wall

is then installed against the concrete, but furring strips are quick, easy and take up less space.

Is it OK to hang drywall vertically?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so

the drywall must be hung vertically

. … For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.

David Martineau
Author
David Martineau
David is an interior designer and home improvement expert. With a degree in architecture, David has worked on various renovation projects and has written for several home and garden publications. David's expertise in decorating, renovation, and repair will help you create your dream home.