What Is An Adjustable Wrench Called?

by | Last updated on January 24, 2024

, , , ,

An adjustable wrench, also called

an adjustable spanner or an adjustable crescent

is a tool, which can be used to loosen or tighten a nut or bolt. It has a “jaw” (the part where the nut or bolt fits), which is of adjustable size [source: Websters]. … This will open the jaw of the wrench.

Is a crescent wrench the same as an adjustable wrench?

An adjustable wrench is larger than a fixed open-end or box-end wrench, but one adjustable alone can do the work of a number of fixed wrenches. The crescent has one jaw that is fixed and one that is adjusted by turning a worm screw.

What is another name for an adjustable wrench?

In the United States and Canada, the adjustable spanner (adjustable wrench) is synonymous with

“Crescent wrench”

due to the widespread Crescent brand line of adjustable wrenches; the former Crescent Tool Company was the assignee of the 1915 U.S. patent for the most familiar form factor of adjustable wrench.

What is an example of an adjustable wrench?

Adjustable wrenches include:

Pipe wrenches

. Crescent (TM) wrenches which have adjustable jaws set at a 30-degree angle from the handle. Although Crescent is a trade name, it is widely used to refer to any regular adjustable wrench with an angled jaw regardless of who manufactured it.

What wrenches are adjustable?

  • Our pick. Channellock 8WCB WideAzz 8-Inch Adjustable Wrench. Versatile and comfortable. …
  • Also great. Milwaukee 48-22-7508 8-Inch Wide Jaw Adjustable Wrench. Nice jaws, no padding. …
  • Also great. Irwin Vise-Grip 2078608 8-Inch Adjustable Wrench. …
  • Upgrade pick. Knipex 86 05 180 Pliers Wrench.

What is a 6 sided wrench called?

WRENCH TYPE: Hex-Key Wrench

Also called

Allen wrenches

(although “Allen” actually refers to specific brand known for making hex-key wrenches), these short six-sided bars of steel are characteristically L-shaped, with one side shorter than the other.

What is the biggest adjustable wrench?

30” Adjustable Wrench Cheater Wrench Cost $434.11 $129.37 Length

30 inches


15 inches

Should you push or pull a wrench?


Always pull, rather than push

, a wrench for greater control and balance. That way, if the nut or bolt should suddenly loosen, you’re less likely to go flying. Never try to get more torque from a wrench by using a cheater bar or other device to extend the leverage.

What is a 10 inch adjustable wrench used for?

Designed for heavy-duty applications, the TEKTON 10-inch adjustable wrench can take on

automotive and small farm equipment repair

. It also works well to secure back nut or bolt while tightening or loosening front nut or bolt with a socket or combination wrench.

What is the safest way to use a wrench?

  1. 1) Only use quality wrenches. …
  2. 2) Match your wrench size to the job. …
  3. 3) Always pull, never push. …
  4. 4) Keep wrenches clean. …
  5. 5) Never strike a wrench with a hammer. …
  6. 6) Do not attempt to add leverage with other objects. …
  7. 7) Never use a damaged wrench.

What is adjustable wrench use for?

wrenches. The adjustable pipe, or Stillson, wrench is

used to hold or turn pipes or circular bars

. This wrench has serrated jaws, one of which is pivoted on the handle to create a strong gripping action on the work.

What is an adjustable wrench good for?

What is the purpose of an adjustable wrench? An adjustable wrench, also known as an adjustable spanner or crescent, is

used to turn or loosen a nut or bolt

. This wrench has jagged jaws, one of which you can adjust to get the grip you need.

Why is the adjustable wrench important?

An adjustable wrench is useful because you do not need to worry about

the size of the nut and can easily fit it against a bolt head or nut and adjust it thoroughly

, ending with strong tightening.

What is the smallest adjustable wrench?


Mini Size 2.5′′ 2.5 inch

Adjustable Spanner Nut Wrench Tool Jaw Capacity 0~10mm Black – – Amazon.com.

Can you use a wrench instead of a socket wrench?

Wrenches perform the same function as ratchets and sockets — tightening and loosening fasteners — but there are differences and situations that call for one over the other. … A wrench with an open end fits around a

fastener

instead of over it, so you can slip it into an area where there isn’t room for a socket.

Is a wrench and a spanner the same thing?

Wrenches and spanners

are ultimately designed to do the same job

– tightening or loosening nuts and bolts. While this can sometimes lead to confusion between them, they’re actually two separate tools with their own characteristics and specific uses.

Diane Mitchell
Author
Diane Mitchell
Diane Mitchell is an animal lover and trainer with over 15 years of experience working with a variety of animals, including dogs, cats, birds, and horses. She has worked with leading animal welfare organizations. Diane is passionate about promoting responsible pet ownership and educating pet owners on the best practices for training and caring for their furry friends.