What Is FG200 Material?

Cast iron

is an alloy of iron and carbon. I.e., FG200 that means grey cast iron with ultimate tensile strength 200 N/mm2.

What is FG cast iron?

Product Data

Standard Flake Iron

(FG) High Strength Flake Iron (HS) Spheroidal Graphite Iron or Nodular Iron (SG) Cast Iron. Page 1. Chemical composition. C Si Mn Cr Ni Mo Mg.

What is fg200?

According to Indian standard specifications, a Grey cast iron designated by ‘FG 200' means that the. A.

Carbon content is 2% Maximum compressive strength is 200 N/mm2 Minimum tensile strength is 200 N/mm2

Is designation of grey cast iron?

According to the European standard DIN EN 1561, grey cast iron (

EN-GJL

), also known more simply as “gray iron”) is a carbon-containing iron material; the carbon present in the material is almost entirely present as flake graphite (in lamellar form) in the microstructure.

Is 210 a material property?

What are the four types of cast iron?

• white iron.
• gray iron.
• ductile iron.
• malleable iron.

Which of the materials has maximum strength?

Tungsten

– With the highest tensile strength of any naturally occurring metal, tungsten is often combined with steel and other metals to create even stronger alloys. Tungsten is brittle, however, and shatters under impact.

Can I use cast iron for everything?

Cast-iron heats and cooks your food evenly, you can use it

in the oven or on the stove

, and, if it's properly seasoned, it works just as well (if not better) than a cheap, non-stick skillet. … There are special ways to cook with, clean, and store it, and if you know what you're doing, it can last your whole life.

What are the three types of cast iron?

• #1) Gray Cast Iron. The most common type, gray cast iron features a graphite microstructure consisting of many small fractures. …
• #2) White Cast Iron. While not as common as gray cast iron, white cast iron is another type worth mentioning. …
• #3) Ductile Cast Iron. …
• #4) Malleable Cast Iron.

Why is pig iron called pig iron?

The iron produced is called “pig iron”

because originally the molten iron was poured into sand pits and the resulting solid iron resembled a pig!

Another story is that the system looked like piglets feeding from a sow.

What are the advantages of grey cast iron?

• Low Cost. …
• Good Vibration/Damping Capability. …
• Excellent Compressive Strength. …
• Ability to Withstand Thermal Cycling. …
• Tensile Strength. …
• Deformation Resistance. …
• Low Melting Point. …
• Oxidation Resistance.

What reduces ductility of a grey cast iron?

Large graphite flakes

reduce the strength and ductility, so inoculants are used to promote fine flakes. Gray cast iron is named after its gray fractured surface, which occurs because the graphitic flakes deflect a passing crack and initiate countless new cracks as the material breaks.

How can I tell if my cast iron is GREY?

If you use a powerful microscope you can

see the graphitic microstructure

that makes grey iron so easily identifiable. In a grey iron casting, you can see little black flakes of graphite. These flakes cause fractures and cause the material to have a grey appearance.

What are the material properties of Steel?

Steel has a number of properties, including:

hardness, toughness, tensile strength, yield strength, elongation, fatigue strength, corrosion, plasticity, malleability and creep

.

Is 226 a material specification?

This standard was formerly known as IS 226. Now IS 2062 has replaced this specification. This grade is

for “Steel for general structural purposes”

. … This grade is also commonly known as IS 2062 – GRE 250(Fe – 410 – W)A, broadly, specifications of this grade Fe gllow A are as under.

What is the hardness of stainless Steel?