| Drill Bit Hole Diameters | Metric Size Fractional Size | . 6 mm .0238 3/32 | .7 mm .0276 7/64 | .8 mm .0315 1/8 |
|---|
What is a 4mm drill bit in inches?
| Drill sizes to 1′′ diameter Legend Fractional Inch Letter Drill Millimeters Number Drill | Millimeters Inches Designation | 3.9688mm .15625′′ 5/32′′ | 3.9878mm .157′′ #22 | 4mm .1575′′ |
|---|
What size drill bit is 6mm?
| Tap Metric Drill US Drill | 5mm x 0.8 4.3mm – | 6mm x 1.0 5.2mm – | 7mm x 1.0 6.1mm 15/64′′ | 8mm x 1.25 6.9mm 17/64′′ |
|---|
What is a 5 32 drill bit in MM?
| Drill Bit Hole Diameters | Metric Size Fractional Size | 1 mm .0394 5/32 | 2 mm .0787 11/64 | 3 mm .1181 3/16 |
|---|
Is 3/8 drill bit the same as 10mm?
3/8′′ bits have a nominal size being just ever so
slightly under 10mm
. You can't drill a hole of any size and put something in it the same size. It must be a bit smaller than the hole you drill.
What size is a 3 mm drill bit?
| Drill sizes to 1′′ diameter Legend Fractional Inch Letter Drill Millimeters Number Drill | Millimeters Inches Designation | 3mm .1181′′ | 3.048mm .12′′ #31 | 3.175mm .125′′ 1/8′′ |
|---|
What is the closest drill bit to 5 16?
You should get around . 2583, which you then round up to the nearest drill bit size. In this case, the most relative drill bit size corresponding to the 5/16′′-18 tap is
17/64
, which corresponds to an F drill bit.
What is 12 mm to inches?
| MM Approximate Size In Inches Exact Size In Inches | 11mm 7/16 Inch 0.43307 Inches | 12mm Just short of 1/2 Inch 0.47244 Inches | 13mm Little over 1/2 Inch 0.51181 Inches | 14mm 9/16 Inch 0.55118 Inches |
|---|
What is the closest drill bit to 9 32?
| fraction in mm | 17⁄64 0.265625 6.746875 | 9⁄32 0.28125 7.14375 | 19⁄64 0.296875 7.540625 | 5⁄16 0.3125 7.9375 |
|---|
What is 3/8ths of an inch in MM?
| Dimensions — Inches to Metric | Decimal Inches Fractional Inches Metric | 0.375” 3/8” 9.53 mm | 0.438” 7/16” 11.13 mm | 0.500” 1/2” 12.70 mm |
|---|
What is an R drill bit?
Drill bit “R” is
.339′′ in diameter
. Hope that helps. danc46 , 09-14-2007 03:39 PM. Registered User. It's smaller than the Q drill bit and larger than the S drill bit.
What size TAP uses a 3/8 drill bit?
| To Tap This Size Screw Or Bolt: Use This Drill Bit: (Closest Fractional:) | 8mm-1.00mm 7.1mm – | 5/16-32 NEF 9/32′′ 9/32′′ | 9mm-1.25 mm 7.9mm – | 3/8-16 NC 5/16′′ 5/16′′ |
|---|
What standard size is closest to 10mm?
So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a
3/8 socket
. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.
What number is a 10mm drill bit?
Wilko 10mm Masonry Drill Bit Number
21
.
How do I know what size drill bit to use?
Typical drill bits have
markings somewhere on the shank above the threads
. It's small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.
What do drill bit sizes mean?
Bit size
reflects the diameter of the body
. Some projects call for specific drill bit sizes, but a bit set that includes sizes from 1/16 inch to 1/4 inch will work for many jobs around the home and workshop. You can add larger bits — 5/16-inch, 3/8-inch, 7/16-inch and 1/2-inch bits — if you need them.
