What Does The Spanner Light Mean?

by | Last updated on January 24, 2024

, , , ,

The Vauxhall Corsa spanner light on the dash is essentially

a warning light

. It looks like a car with a spanner through it and remains it illuminated when you’ve started the ignition to signify that your car is due for a service. In this case, you should book your car in for servicing as soon as possible.

How do I reset my car with spanner light?


Hold trip reset button

in. turn ignition so all the lights on the dash come on… Keep button pushed in untill the inspection symbol turned off.. basically the EML (car/spanner) will reset after 40-odd successful restarts with no fault recurring in that time.

What does the spanner light mean on a Ford?

The wrench warning light on Ford vehicles is

the powertrain malfunction indicator light

. When it illuminates, it means that the computer has detected an issue with your vehicle’s powertrain or four-wheel-drive system.

What does the wrench warning light mean?

When the wrench light illuminates,

it is letting you know it is time to make an appointment for your next service

. This mostly serves as a warning or a reminder to make the appointment now.

Can you drive with wrench light on?

It is suggested that you have your car towed into a mechanic’s garage, or, if you are one of the lucky few who still have your car on and able to drive, you drive your vehicle to a garage immediately.

It is unsafe to drive with this light on for long as it may stall and won’t come back on at any given moment

.

Why is there a spanner symbol on my dashboard?

Many cars will monitor the time and mileage covered since the previous service and alert you when the next is due with a spanner symbol. … They

monitor wear and tear on components

, and then calculate when the next service is needed.

How do I reset my car with spanner light Corsa?

1)

hold down your trip reset button

, whilst doing this turn the ignition on. 4) then hold the trip button in for a third time, turn the ignition on and then start the engine. Your service light should now be reset.

What does car and spanner light mean on Astra?

This car with a spanner warning light illuminates yellow to

signify that the Astra needs servicing

. A warning message or a specific warning code ( such as code 82 informing you that the engine needs a oil and filter change for example) may also be displayed to inform what issues the vehicle has.

Is it bad to drive with maintenance light on?

It’s

a light that remains active permanently

, letting you know that you need to go for an oil change in a certified auto shop. … It’s important to know that the light itself doesn’t mean that your car is damaged, so you can still safely use your vehicle while the light is on in your dashboard.

What does the orange wrench light mean?

What does an orange wrench mean? It means you need to

change car oil and oil filter

. Below the percentage indicating remaining oil life, icons indicating other maintenance service items may also appear. the light is a reminder that your maintenance is due. oil change & tire rotation and a schedule check on the vehicle.

What does oil can and wrench light mean?

This is a

signal that the oil needs changing

. If that has been done, then the computer may not have been reset, after it was changed. If that is the case, then turn the switch on, do not crank engine. push the fuel pedal three times, quickly and it should flash, letting you know it has reset.

Is the wrench light serious?

The wrench light is similar to the “Check Engine” light,

but more serious

. A Check Engine light could mean something as simple as, “It’s time for a routine oil change.” A Wrench light, however, means that there has been some sort of powertrain fault with your Ford Escape.

Can you turn off service light?

Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

What causes the brake warning light to come on?

When this light comes on, it means one of two things. Either

the hydraulic fluid (brake fluid) in the master cylinder is low

, or the parking brake is engaged. … When you press on the brake pedal, you actuate the master cylinder and put pressure on the fluid in the brake lines.

Are dashboard warning lights an MOT failure?

Dashboard lights indicating potential failure of your car’s engine, ABS & traction systems, headlight mainbeam, brake fluid level, power steering and seatbelts can all lead to an

MOT failure

.

Jasmine Sibley
Author
Jasmine Sibley
Jasmine is a DIY enthusiast with a passion for crafting and design. She has written several blog posts on crafting and has been featured in various DIY websites. Jasmine's expertise in sewing, knitting, and woodworking will help you create beautiful and unique projects.