What Brand Is ILo TV?

Launched in 2004, iLo technologies is

a Wal-Mart consumer electronics house brand

. Wal-Mart sells many low cost, entry-level consumer electronics products under the iLo name in stores and on Walmart.com.

How to factory reset iLO TV?

1. From the System Utilities screen, select System Configuration > iLO 4 Configuration Utility > Set to factory defaults, and press Enter. …
2. Select YES, and press Enter.
3. When prompted to confirm the reset, press Enter. …
4. Resume the boot process:

How do I program my RCA remote to my iLO TV?

1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. …
5. Press the TV button to store the 3, 4, or 5 digit code.

How do I reset my iLO 4 to factory settings?

1. From the System Utilities screen, select System Configuration > iLO 4 Configuration Utility > Set to factory defaults, and press Enter. …
2. Select YES, and press Enter.
3. When prompted to confirm the reset, press Enter. …
4. Resume the boot process:

What does resetting iLO do?

Rebooting (Resetting) iLO

Using the Reset option does

not make any configuration changes, but ends all active connections to the iLO firmware

. If a firmware file upload is in progress, it is terminated. If a firmware flash is in progress, user cannot reset iLO until the process is finished.

What is default iLO username and password?

Re: ILO default password

As far as I know, the default iLO

username is usually Administrator

and the password is a random alphanumeric string – but it might have been a standard string with older models.

How do I use HP iLO 4?

1. Connect iLO to the network.
2. If users are not using dynamic IP addressing, use the ROM-based setup utilities to configure a static IP address.
3. If user will use the local accounts feature, use the ROM-based setup utilities to configure user accounts.
4. Optional: Install an iLO license.

Does updating iLO reboot the server?

Re: Does iLO upgrade require host server reboot? … If you upgrade via the iLO web interface,

the host server does not require a restart

. The iLO will restart itself for the changes to take effect.

What are the possible reasons to use the iLO service port?

• Downloading the Active Health System Log to a supported USB flash drive.
• Connecting a client (such as a laptop) with a supported USB to a Ethernet adapter in order to access the iLO web interface, remote console, CLI, iLO RESTful API, or scripts.

How do I find my iLO server IP?

you can

go into System Management Homepage-> Management processor link

, then when you click it on the left from the task pane you must be forwarded to a link for iLO and you can see the IP address.

How do I find my iLO username and password?

iLO default credentials

The default information is on the serial label pull tab attached to the server that contains the iLO management processor. Use these values to access iLO remotely from a network client by using a web browser.

DNS name – ILOXXXXXXXXXXXX

, where the X characters represent the server serial number.

How do I find my iLO password?

Re: iLO4 default password

There should be

a “toe tag” on the front of the server that has the serial number

. The iLO password is also listed on this tag.

How do I get my iLO password?

1. Reboot the host.
2. Watch the console closely while the host is rebooting. …
3. On the iLo menu, select User.
4. Select Edit for Administrator user. …
5. Make sure that all the other options for Administrator are set to Yes. …
6. On the iLo menu, select File.
7. Select Exit.

What is HP iLO used for?

Integrated Lights-Out (iLO) is a

remote server management processor

embedded on the system boards of HP ProLiant and Blade servers that allows controlling and monitoring of HP servers from a remote location.

What is the iLO port for HP?

Integrated Lights-Out, or iLO, is a proprietary embedded server management technology by Hewlett-Packard Enterprise which provides out-of-band management facilities. The physical connection is an

Ethernet port

that can be found on most ProLiant servers and microservers of the 300 and above series.

How do I find my iLO?

1. Select the System Configuration option.
2. On the next screen, select the iLo Configuration Utility.
3. Select the Network Options entry.
4. On this screen, you will be find out the HP iLo interface IP address.