In case of a lab fire or explosion,
ensure your safety first and call emergency responders immediately for help
. Evacuate the building safely and pull fire alarms or notify nearby people, if possible. Don’t use elevators. Use stairs and locate the nearest exit.
How do you put out a fire in a lab?
Fire Emergency
Small fires:
Use a fire extinguisher or fire blanket
to extinguish the fire. After the fire has been extinguished, report the incident to the lab PI and the Building Manager right away.
What do you do if there is a fire in a lab?
should always
pull the fire alarm and call 911 to evacuate the building
and bring the fire department. ➢ Keep areas around all types of heating equipment clear of combustibles at all times. While working in a lab you notice that smoke is coming from a fume hood across the room.
What is the first thing you should do if you discover a fire in the lab?
- Pull the fire alarm and call for help. …
- Alert people in the area to begin evacuation. …
- Close doors to confine the fire.
- Go to your designated assembly area, away and upwind from the building.
What are the 10 lab safety rules?
- of 10. The Most Important Lab Safety Rule. …
- of 10. Know the Location of Safety Equipment. …
- of 10. Dress for the Lab. …
- of 10. Don’t Eat or Drink in the Laboratory. …
- of 10. Don’t Taste or Sniff Chemicals. …
- of 10. Don’t Play Mad Scientist in the Laboratory. …
- of 10. Dispose of Lab Waste Properly. …
- of 10.
Why is there no eating or drinking in a lab?
You should not eat in a chemistry lab
because of the threat of contamination
. This threat of contamination has two parts. The first part is that you never know where chemical residue may be and ingesting it could be dangerous. Many chemicals leave no visible trace of their presence.
What is a fire blanket used for in a lab?
A fire blanket is a versatile safety aid. It is used primarily as a
first aid measure for prevention of shock
rather than as a fire extinguisher for burning or smoldering clothes. It is also useful to contain and control chemical spills in the laboratory. The fire blanket is a one-use safety aid.
How would one put out an accidental ethanol fire in the lab?
Use
a CO2, halon, or dry chemical extinguisher
that is marked B, C, BC, or ABC. An alcohol-type or alcohol-resistant (ARF) foam may be used to effectively combat fuel ethanol fires.
What must you do before you leave the lab?
Before leaving the lab, you’ll need to make
sure it’s thoroughly cleaned
so it’s ready and safe to work in again. Make sure to clean all used glassware, return reagents to the storage area, dispose waste in the right containers and clean your workbench.
What patients should be evacuated first?
Patients in immediate danger should
be moved first. They should follow a lead nurse into a safe area. Move patients who are closest to danger first (non-ambulatory and ambulatory). Direct ambulatory patients toward a safe area.
What is the correct way to respond to a fire alarm?
- Immediately evacuate the building to the outside.
- NEVER go back to retrieve personal belongings.
- Move away from the front of the building to allow the fire fighters and their trucks to access the building.
What are the two golden rules to remember when fighting a fire?
- In the event of a fire or other emergency, remember four golden rules: …
- Emergency Services: Call no matter how small.
- Save these numbers on your cell phone: …
- Extinguish: Only try to extinguish if safe to do so. …
- Fire Action! …
- Using a Fire Extinguisher.
- P – Pull the pin. …
- EMERGENCY NUMBERS.
What are the 8 lab safety rules?
- Know locations of laboratory safety showers, eyewashstations, and fire extinguishers. …
- Know emergency exit routes.
- Avoid skin and eye contact with all chemicals.
- Minimize all chemical exposures.
- No horseplay will be tolerated.
- Assume that all chemicals of unknown toxicity are highly toxic.
What are the 5 safety rules?
- Your safety is your personal responsibility.
- Always follow the correct procedures.
- Never take shortcuts.
- Take responsibility and clean up if you made a mess.
- Clean and organize your workspace.
- Ensure a clear and easy route to emergency exits and equipment.
- Be alert and awake on the job.
What are the basic safety rules?
- STAY ALERT – and stay alive. …
- WEAR THE RIGHT CLOTHES – work clothes should fit properly. …
- USE THE RIGHT TOOLS – if you need a hammer, get a hammer. …
- LEARN HOW TO LIFT – Lifting takes more than muscle; it is an art.
What is the most important lab safety rule?
The most important lab safety rule is
to know the location of and how to use safety equipment
, such as a fire extinguisher.
