Yes
, all you can do now is caulk it. If there is an inspection involved they have the final word. As for caulking to seal air leaks continue up where the wall meets the sill and catch all butt joints both sill and framing.
What do you put between bottom plate and concrete?
Construction Adhesive
: Construction adhesive, such as Quikrete (link to Amazon), can be used to secure a wood bottom plate to a concrete floor.
Is a sill plate gasket necessary?
Yes
, all you can do now is caulk it. If there is an inspection involved they have the final word. As for caulking to seal air leaks continue up where the wall meets the sill and catch all butt joints both sill and framing.
How do you keep water from going under a sill plate?
A filler
, similar to caulk, is generally used to seal these gaps between the sill plate and foundation when the home is constructed. Over time it can crack and chip, allowing water to seep — or even pour — into the basement.
Should you use pressure treated wood for a sill plate?
Sill Plate is a tough, versatile pressure-treated lumber. Like borate-treated lumber, it’s guaranteed to stop termites and prevent decay, plus it’s compatible with carbon steel (black iron) fasteners.
What is the difference between a sill plate and a sole plate?
Sill plate is PT lumber used on top of a concrete foundation on the bottom of a wall. Bottom plate is standard lumber on wood on the bottom of a wall. Sole plate is PT lumber on a concrete floor as used in a basement partition wall.
When would you use a sill gasket?
Sill seal is ribbed polyethylene foam used
to seal the gap between the sill plate and the foundation
. Lightweight and resilient, it is easy to cut to length and installs without tools. The ribs effectively seal out air currents, moisture and insects, leaving you worry free to enjoy your home.
How do you secure a sill plate to concrete?
One option for installing sill plates is the
use of Wedge Anchors
. This type of anchor is a post-installed anchor, meaning that it is placed in concrete after it is fully cured. These fasteners are designed for use in solid concrete only. Wedge anchors are available from 1/4′′ to 1 1/4′′ in diameter.
Can wood post sit on concrete?
First rule, gang:
Do not set wooden posts in concrete
. … The concrete creates a collar around the post, and because different materials expand and contract with mosture and temperature at different rates, inevitably a little space develops around the post. Water loves to seep into little spaces.
How do you attach a sill plate to concrete?
- Position the sill plate in place on the concrete slab or foundation. …
- Drill holes through both the sill plate and into the concrete, using a concrete masonry drill-bit. …
- Insert one wedge anchor bolt set into each drilled hole and hammer it into place with a hammer.
How do floor joists attach to sill plate?
1 Answer. The floor joists are secured to the sill joists by
installing wall sheathing (plywood or OSB board) that laps from the sill plate up the wall to the double top plate
. When the sheathing is nailed to the sill plates, rim joists, studs and double top plate, then all the components are secured in place.
How do you replace a section on a sill plate?
- Remove weight from the sill.
- Remove the sill (and any other damage).
- Re-design a sill and/or stud system that meets current code and fits the needs of the space.
- Install.
- Inspect.
- Insulate.
Why would you make the bottom plate out of pressure-treated wood?
It’s meant to be an air-sealing gasket, but it also is working as a
capillary break
because it keeps water in the concrete from wicking up into the wood. … Pressure-treated bottom plates deal with the symptoms of the problem when a capillary break between wood and concrete deals with the cause.
Is sill seal a moisture barrier?
Easy to install and a quality product
Very easy to install and adds a good moisture barrier between the concrete foundation and the wood sill plate along with sealing out any air infiltration between the two as well.
What type of wood is used for bottom plate?
In single and multi-family housing when a stud wall is placed on top of a subfloor or other wood substrate, a bottom plate is typically some version of a stress-graded dimensional lumber,
either 2×4 or 2×6 in most cases
, but occasionally greater if necessary.