What Are The R Codes?

by | Last updated on January 24, 2024

, , , ,

The R-Codes is

a State Planning Policy that sets out the basis of design and assessment for single houses, grouped dwellings

, and multiple dwellings (in areas coded less than R40) in Western Australia.

What is R code in construction?

In simple terms, R codes

tell you how many dwellings or lots can be created on a 1 hectare (10,000 square metres) parcel of land

provided you meet the minimum and average lot size for each newly created lot. Generally, the higher the R code number, the more lots can be created.

What is r in planning?

The

Residential Design Codes

(also known as the R-Codes) is a state-level planning policy that forms the basis for residential development control in Western Australia. All residential development is to comply with the requirements of the R-Codes.

What does R20 R30 mean?

For example, if a property is coded R30 and is 683m2 in size, then 2 dwellings could potentially* be constructed on that property. An R-Code of R20 means

that an average of 450m2 is required per dwelling

. The table below is a guide as to how.

What do R codes mean?

Posted 9 April 2019. If you’re looking to capitalise on the profit potential of your land by subdividing, it won’t be long before you come across the term ‘R-Code’. R-Code stands for ‘

Residential Design Code

‘ and essentially controls the quantity and type of residence/s that can be built on a certain home site.

How do R codes work?

In simple terms, the R-Codes

tell you how many residences can go on a 1-hectare (10,000 square metre) parcel of land

. … For example, an R-Code of R20 means you could have up to 20 dwellings per hectare of land, with each dwelling requiring an average site area of 450m

2

and a minimum site are of 350m

2

.

What does R zoning mean?

This zone is a

residential zoning district

, … Districts designated for residential use, RR, RS, R-1, R-2 and R-3, are limited to dwellings and the uses normally associated with residential neighborhoods. Such uses include schools, churches and parks.

What does Zone R 30 mean?

(R-30)

Residential Zoning District

. Page 1. (R-30) Residential Zoning District. At this time, low-density residential land use has been provided in the majority of the southern half of the county, “in-filling” areas where there are no existing or planned water or sewer services.

How is plot ratio calculated?

How to calculate plot ratio? Plot ratio is

the total floor area of a development divided by the size of the land

. … Total floor space which could be developed = 1000 sq ft (land size) X 5 (plot ratio) = 5,000 sq ft.

What does R25 40 zoning mean?

The codes R25 and below are

considered low-density

, while the medium density codes are R30 through R60. The codes R80 and above are therefore high-density areas. Most Perth suburbs and regional areas are zoned R20, but as you would expect, the suburbs closer to Perth CBD are R30 and R40.

What does zoned R5 mean?

The R5

Large Lot Residential Zone

. The R5 Large Lot Residential zone is described by the NSW Department of Planning, Industry and Environment (the Department) as providing ‘residential housing in a rural setting, often adjacent to towns or metropolitan areas’. This zone is a significant land use in the MidCoast.

Can R20 be subdivided?

So when we’re looking at for instance R20, which is the most common R-Code throughout WA, you’ll see that in order to subdivide you need to have an

average of 450sqms

. That’s the first criteria that you need to ensure that you meet. So if you’re looking at a duplex that’s two lots and they need to both average 450.

What does R60 mean?

Acronym Definition R60 Retention After 60 Minutes

What does R5 mean?

R5 districts

allow a variety of housing at a higher density than permitted

in R3-2 and R4 districts. … With a height limit of 40 feet, R5 districts provide a transition between lower- and higher-density neighborhoods and are widely mapped in Brooklyn, Queens and the Bronx.

What does Zone 50 mean?

R-50.

Permitted Uses

.

Community residences for developmentally disabled

6 to 15. Community residences for victims of domestic violence 6 to 15.

How do I find out my property zoning in WA?

In Western Australia, property information such as land zoning is listed on a property’s zoning certificate, which can be obtained

from most local government councils

for a fee.

David Martineau
Author
David Martineau
David is an interior designer and home improvement expert. With a degree in architecture, David has worked on various renovation projects and has written for several home and garden publications. David's expertise in decorating, renovation, and repair will help you create your dream home.