Backing – Moving the vehicle in reverse direction. Coasting – Level of braking in which releasing the accelerator stops the vehicle’s forward propulsion.
Controlled braking
– Level of braking done with sufficient pressure to slow the vehicle.
What is the key to smooth stopping?
What is the key to smooth stopping? Looking for enough ahead to begin slowing early, ease up on the accelerator,
apply the brake gently at first, then increase pressure gradually
as car is slowing as much as desired, ease up on the brake before coming to a stop.
What are the three levels of breaking?
The Breaking Program is a training-based education continuum that includes three levels of proficiency for each student to achieve (
Beginner, Intermediate, and Advanced level
).
How long does it take a driver to move their foot from the accelerator to the brake?
Studies have shown that it takes the average driver from
one-half to three-quarters of a second
to perceive a need to hit the brakes, and another three-quarters of a second to move your foot from the gas to the brake pedal.
What is the most common braking technique?
Unsourced material may be challenged and removed.
Threshold braking or limit braking
is a driving technique most commonly used in motor racing, but also practiced in road vehicles to slow a vehicle at the maximum rate using the brakes.
Why are both of your hands never kept at the 12 o’clock position on a steering wheel?
Simply reverse the process to bring the vehicle back to the desired path. Since your hands never cross over the steering wheel, there
is less chance of an injury to the face
, hands or arms induced by your hands or arms in the event of a frontal crash due to an air bag.
What is the 3 step braking process?
Coasting
– Level of braking in which releasing the accelerator stops the vehicle’s forward propulsion. Controlled braking – Level of braking done with sufficient pressure to slow the vehicle.
What are the 4 braking techniques?
- Controlled braking.
- Threshold braking.
- Cover braking.
How can I drive more smoothly?
- 1) THE RIGHT POSITION. You can’t be a safer and smoother driver if you cannot control the vehicle properly. …
- 2) ALWAYS LOOK FAR, FAR AHEAD. …
- 3) KILL DISTRACTIONS. …
- 4) DON’T LET EMOTIONS OVERCOME YOU. …
- 5) ALWAYS AVOID ALCOHOL.
How many car lengths is 3 seconds?
How to Measure a Safe Following Distance. Many drivers follow the “three-second rule.” In other words, you should
keep three seconds worth of space between your car and the car in front of you
in order to maintain a safe following distance.
What is one thing you should try if your brakes fail?
If your brakes go out, you want to do three things. First,
downshift to a lower gear
. Second, if you have regular brakes pump the brake pedal fast and hard to build up brake fluid pressure. If the brakes haven’t started working after three or four pumps go on the step three which is use the parking brake.
At what speed does hydroplaning occur?
Vehicle speed – always slow down when it’s wet. Hydroplaning can occur at any speed under the right combination of conditions, but some sources define higher speeds as
over 40 mph
.
What is the brake cover technique?
The cover braking technique involves
taking your right foot off the accelerator and holding it over the brake pedal
. … So, whenever you identify a hazard, cover the brake to prepare for sudden stops or slowing. When covering the brake, be careful not to rest your foot on the brake pedal (also known as riding the brake).
What is a braking drift?
For a braking drift you’re essentially
keeping the front tires on the hairy edge of their traction limit and making the rears exceed theirs
. The braking drift can be a very fast way to slide out a car that has initial oversteer on turn-in and understeer on sustained cornering.
