YELLOW LINES
mark the center of a two-way road used for two-way traffic
. You may pass on a two-way road if the yellow centerline is broken. When a solid and a broken yellow line are together, you must not pass if you are driving next to the solid line.
What does yellow street paint mean?
The time is usually shown on a sign next to the green zone, or may be painted on the curb. Green curb can also be used for student loading zones, if accompanied by the appropriate signs. Yellow:
Stop only long enough to load or unload passengers—no longer than posted.
What is the purpose of the yellow lines painted on the road?
Explanation: These lines are often found on the approach to a roundabout or a dangerous junction.
They give you extra warning to adjust your speed
. Look well ahead and do this in good time.
What do yellow lines on the edge of the road mean?
There are various types of yellow lines that are marked on the road or edge of the pavement/kerb that indicate
waiting restrictions
. Yellow lines are provided where there is a need to restrict parking for the following reasons: … Improve road safety for motorists, pedestrians and cyclists. Improve visibility at junctions.
What lines can you cross when driving?
Solid White Line
You should not cross this line to change lanes unless necessary and safe to do so. In some states, it is illegal to cross a solid white line; in California, it is legal to do so. Only cross a solid white line if it is safe to do so; solid white lines are meant to discourage you from changing lanes.
What do road lines mean?
Solid white lines define
lanes of traffic going in the same direction
, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes. • Yellow lines show you where traffic is going in different directions.
What do the colors on the street mean?
RED: Electric Power Lines, Cables
, Conduit and Lighting Cables. YELLOW: Gas, Oil, Steam, Petroleum or Gaseous Materials. ORANGE: Communication, Alarm or Signal Lines, Cables or Conduits. BLUE: Potable, Water.
What is the APWA color code?
Red
: Electric power lines, cables or conduit, and lighting cables. Yellow: Gas, oil, steam, petroleum, or gaseous materials. Orange: Communication, alarm or signal lines, cables or conduits, and fiber. Blue: Potable water.
Can you cross a single yellow line?
When there is a
single
broken
yellow line
running down the middle of a street, this is a best-case scenario for drivers on both sides of the road when it comes to passing other drivers. This
yellow line
means that people are free to
pass
other people
if they
wish to
do
it.
Can you enter the area with diagonal lines?
Explanation: Diagonal stripes or chevrons are painted on the road to help separate traffic lanes or vehicles turning right. When bordered by a solid white line,
you shouldn’t enter the area except in an emergency
. If the line is broken, you shouldn’t enter the area unless it’s necessary and you can see that it’s safe.
What is the difference between a single yellow line and a double yellow line?
Single yellow lines mean you can’t wait there between certain hours. Double yellow lines
mean you cannot wait there at all
.
Can I stop on single yellow line?
Single yellow lines mean no waiting or parking during the times shown on nearby signs or at the entrance to a controlled parking zone. …
You can usually stop to drop off or pick up passengers unless signs say otherwise
or there are small yellow lines marked on the pavement at right angles to its edge.
What are the four steps to successful passing?
- Scan for hazards, e.g., oncoming vehicles, vehicles approaching from rear, merging vehicles;
- Check for blind spots;
- Signal your intention and accelerate into passing lane;
- Accelerate quickly to an appropriate speed;
- Concentrate on the path ahead;
- Check the mirror for following cars.
What is the rule to avoid tailgating?
Most rear-end collisions are caused by tailgating. To avoid tailgating, use the
“Three-Second Rule
.” When the vehicle ahead of you passes a certain point, such as a sign, count “one-thousand-one, one-thousand-two, one-thousand-three.” If you pass the same point before you finish counting, you are following too closely.
Is it ever OK to cross a double yellow line?
The NSW Roads and Maritime Services state that
drivers are allowed to cross a single or double line if the driver wants to enter or leave a property “by the shortest route
“.
What are the 4 types of road signs?
- Guidance (white characters on blue in general – on green in expressways),
- Warning (black characters and symbols on yellow diamond),
- Regulation (red or blue circle, depending on prohibition or regulation),
