- If a chisel is used as a screwdriver, the tip of the chisel may break and fly off, hitting the user or other employees.
- If a wooden handle on a tool, such as a hammer or an axe, is loose, splintered, or cracked, the head of the tool may fly off and strike the user or other employees.
What are the most common hazards associated with the use of hand tools?
The two most common hazards associated with the use of hand tools are
misuse and improper maintenance
. Misuse occurs when a hand tool is used for something other than its intended purpose. (An example would be using a screwdriver as a chisel. This may cause the tip to break and strike someone).
What is the hazard that is caused by powered tools or manual use of tools equipment or machine?
Hazards to the user include
projectiles, contact, noise, vibration and entanglement
. Always wear appropriate PPE to protect you from the specific hazards presented by power tools, such as dust exposure and projectiles. PPE such as goggles, dust mask, gloves, hard hat, and safety boots should be worn where appropriate.
What safety hazards are present when using hand tools such as wrenches?
- The wrench slips off of the work,
- The work piece may suddenly break free causing you to lose balance,
- The wrench or work piece may break, or.
- Turning the handle quickly or with pressure may create stress and strains on the hand or arm.
What are the hazardous activities in the maintaining tools and equipment?
Employees who use hand and power tools and who are exposed to the hazards of
falling, flying, abrasive and splashing objects
, or exposed to harmful dusts, fumes, mists, vapors or gases must be provided with the particular personal equipment necessary to protect them from the hazard.
What is the importance of maintaining tools and equipment?
If you take care of your tools, they will return the favor. Proper care and routine maintenance of your hand tools and power tools makes
any home improvement or repair project easier
, safer and more successful. Proper tool care also saves you money because the better they’re cared for, the longer they’ll last.
How do you maintain tools and equipment?
Clean, Inspect and Care for Tools
Make it a habit to clean tools after each use before you return them to storage. Wipe them down with a rag or
old towel
and be sure they are free of dust, grease and debris before you put them into their proper places. This is also an opportunity to look for any damage or defects.
What are the hazard of using hand tools?
What are the main health concerns in working with hand tools? Along with common injuries such as cuts, lacerations, and bruises, the frequent and prolonged use of hand tools can cause
soreness, aches, pains, and fatigue
, which, when ignored, can lead to chronic musculoskeletal injuries (MSIs) of various kinds.
What is the meaning of safety rules are your best tools?
Safety Quote: Safety Rules are your best tools.
The greatest tool you can equip employees with is knowledge
. You can’t expect workers to follow safe practices on the job if you haven’t invested time in safety training.
Are hand tools a hazard?
Some typical risks from hand tools
flying. Iron or steel hand tools can be
a dangerous ignition source around flammable substances
.
What are the tools equipment?
Tools and Equipment means
all hand tools, implements, camp equipment, drawing office and survey instruments, medical and surgical instruments and all articles of similar nature
, whether or not they are of an expendable nature, which are not normally issued to officers personally for use in carrying out their official …
How do you conduct the checking of tools and equipment?
- Inspect tools for any damage prior to each use.
- Check the handle and body casing of the tool for cracks or other damage.
- If the tool has auxiliary or double handles, check to see that they installed securely.
What are the examples of mechanical hazards?
- Chain drives.
- Feed rollers.
- Gears.
- Sprockets.
- Belt drives.
- Pulley drives.
- Conveyors.
What are the safety procedures in using hand tools and equipment?
- Inspect regularly. Regularly inspect your tools to make sure that they are in good condition.
- Wear gloves. …
- Carry with care. …
- Don’t pocket sharp objects. …
- Be aware of your surroundings. …
- Use the right tools. …
- Follow instructions. …
- Clean and return.
What is the connection between tools and PPE?
The type of personal protective equipment (PPE) you need when using hand tools depends on the tool being used and the hazard(s) created by use of the tool. At a minimum, eye
protection
in the form of safety glasses or goggles must be worn at all times for eye protection.
How will you avoid hazards in the use of hand tools?
- Ensure Wooden Handles are Not Cracked, Loose, or Splintered.
- Ensure the Wrench’s Jaws are Not Sprung.
- Direct Sharp Tools Away from Other People, and Aisle Areas.
- Do Not Use Mushroomed Heads with Impact Tools, such as Chisels and Wedges.
- Use Spark Resistant Tools.
