What Are The Steps Of Pass?

by | Last updated on January 24, 2024

, , , ,
  • Scan for hazards, e.g., oncoming vehicles, vehicles approaching from rear, merging vehicles;
  • Check for blind spots;
  • Signal your intention and accelerate into passing lane;
  • Accelerate quickly to an appropriate speed;
  • Concentrate on the path ahead;
  • Check the mirror for following cars.

What is pass technique?

A simple fire extinguisher training technique to use with employees is the PASS method: P

ull the pin on the extinguisher

. Aim the hose nozzle low toward the base of the fire. Squeeze the handle to release the extinguishing agent. Sweep the nozzle from side to side at the base of the flames until extinguished.

What are the four steps to follow when using any fire extinguisher quizlet?

When using an extinguisher, use the

PASS system – Pull, Aim, Squeeze, Sweep

. Pull the pin on the extinguisher. Aim the extinguisher.

How do you use a fire extinguisher hint pass?

  1. Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism.
  2. Aim low. Point the extinguisher at the base of the fire.
  3. Squeeze the lever slowly and evenly.
  4. Sweep the nozzle from side-to-side.

What is step one of the pass technique?

PASS Stands for:

Pull the pin

. Aim low at the base of the fire, pointing the hose, nozzle or horn. Squeeze the handle or trigger to release the extinguishing substance. Sweep from side to side.

What are the four steps for the pass system?

  • Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …
  • Aim. Approach the fire standing at a safe distance. …
  • Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …
  • Sweep.

What does the A stand for in pass?

It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for

Pull, Aim, Squeeze, and Sweep

.

What are the 3 methods of extinguishing a fire?

All fires can be extinguished by

cooling, smothering, starving or by interrupting the combustion process

to extinguish the fire. One of the most common methods of extinguishing a fire is by cooling with water.

What is full form of pass?

The wording includes the RACE acronym of “Rescue, Alarm, Confine, Extinguish” for firefighting procedures as well as the PASS acronym of “

Pull the pin, Aim at base of fire, Squeeze handle, and Sweep side to side

” for extinguisher usage.

What’s the immediate step to do if your clothes catch fire?

  1. Stop what you’re doing.
  2. Drop to the ground and cover your face if you can.
  3. Roll over and over or back and forth until the flames go out. Running will only make the fire burn faster.

What are 2 methods you can use to correctly identify a patient?

  • Name.
  • Assigned identification number (e.g., medical record number)
  • Date of birth.
  • Phone number.
  • Social security number.
  • Address.
  • Photo.

What are 4 safety precautions that must be followed while using solutions?

List four safety precautions that must be followed while using solutions .

Do not operate until you have been instructed

, read and follow operating instructions, do not operate if your constructer is not in the room, report any damage or malfunction.

What does the ABC type of fire extinguisher stand for?

Dry Chemical Extinguishers come in a variety of types. You may see them labeled: • “DC” short for “dry chem” • “ABC” indicating that

they are designed to extinguish class A,B,and C fires

, or • “BC” indicating that they are designed to extinguish class B and C fires.

What is fire Class C?

Class C. Class C fires involve

energized electrical equipment

. Extinguishers with a C rating are designed for use with fires involving energized electrical equipment.

What is the first step of the fire response?


RACE: Remove, Alarm, Confine and Extinguish or Evacuate

This easy to remember acronym is our University procedure in the case of a fire. Particularly in the hospital, every staff member is trained to recognize and respond appropriately in the case of a fire using this term.

What does the final S stand for in pass?

To use a fire extinguisher correctly, experts say that one should remember the acronym P.A.S.S. — P: Pull the pin. A: Aim at the base of the fire. S: Squeeze the trigger. S:

Sweep side to side

.

David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.