How Do I Program My Sharp Aquos Remote To My DVD Player?

Point the Sharp Aquos remote control directly at the Sony DVD player.

Press the “Function” button on the remote until the LED lights under the component to be programmed

. Press “FUNCTION” and “DISPLAY” at the same time to enter the device code mode. The “LED” under the device will blink once.

How do I find my Sharp TV remote code?

1. Sharp TV remote control codes.
2. The 3 digit codes for most programmable universal remote controls for Sharp televisions are: 002. 013. 014. 111. 502. 509. 712. 812. …
3. The 4 digit codes for most programmable universal remote controls for Sharp televisions are: 0039. 0093. 0165. 0386. 1004. 1009. 1011.

Can I program my TV remote to my DVD player?

How to program a universal remote to a DVD player, Blu Ray player, or TV: Turn on the device. On the remote control, press the corresponding

device button

– “TV”, “DVD” or “AUX.” … To obtain the first digit of the code press “1” on the remote number pad and then count the number of times the device button blinks.

How do I reset my Sharp Aquos remote?

If the remote control still does not work, reset the remote control by

removing the batteries

. Then press and hold the POWER BUTTON for 30 seconds. Insert the new batteries and press TV and POWER to turn “On” the television.

How do I pair my Sharp Aquos remote?

Press the button on the remote control

that corresponds to the type of device you are programming. At the same time, press and hold the Display button. For example, press TV and Display on the remote at the same time to activate the programming option for your television.

How do you connect a universal remote to a DVD player?

Power on the equipment you want to control.

Press and hold the button on the universal remote that matches the device you're

pairing (e.g. if it's a DVD player, press the DVD button). The light on the remote will blink once and then stay steady.

How do you program a universal remote to a DVD without the code?

Common method #4:

Press and hold the power button and device key

simultaneously until the LED blinks or remains lit, then release and repeatedly press the power button until the device turns on or off, then press the device key (sometimes the stop button) to save the setting.

How do you connect a one for all remote to a Sharp TV?

1. PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. ENTER the 3 digit code for your brand.
4. You should receive 2 quick flashes after entering your code.

How do I find my TV code?

1. Go to the “Universal Electronics Cable Remote Support” page online. …
2. Select the remote control model number you own; you can identify it by the look and design of the remote. …
3. Type in the brand and type of TV you own and submit to receive your device code.

How do I program my new Sharp TV remote?

1. Turn on the device you want to program your remote to work with.
2. Depress and hold the “Channel +” button on your remote; at the same time, depress and hold the “Cable/Sat” or “TV” button.
3. Release the buttons after waiting at least five seconds.

Why is my TV not responding to the remote?

A remote control that will not respond or control your TV usually means

low batteries

. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

How do I fix my sharp remote?

If the remote control still does not work, reset the remote control by

removing the batteries

. Then press and hold the POWER BUTTON for 30 seconds. Insert the new batteries and press TV and POWER to turn “On” the television.

How can I control my DVD player without a remote?

If you can't find your DVD player or Blu-ray player remote control, or it has stopped working, don't despair. You can often still play media using buttons on the device itself. You can also use

a universal remote

or, with some models, a smart phone app to control the player.

How do you pair a universal remote?

Turn on your TV or another device you wish to control. Press and hold the

corresponding DEVICE and POWER buttons on the remote

at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

Can I use my phone as a DVD remote?

The short answer:

Yes

. You'll need to download an app and purchase a few pieces of equipment, but using your phone as a universal remote is no longer a tech dream. TVs, DVD players, cable boxes and stereos use an infrared (IR) signal to know when to do things like change the channel or play the DVD.