Press the Menu button on your handset and select the Handset Setup menu. Next, select the Language submenu, move the cursor to your language choice, using the arrow key. Once selected, press the Select button to confirm. You will then be required to establish the date and time settings.
How do you change the time on a Uniden phone?
- Press the “Select” button on the phone base once to enter time setting mode.
- Use the up and down arrow buttons to switch between “12h,” for 12-hour display, and “24h,” for 24-hour display. …
- Change the hours unit by pressing the up or down arrow buttons and press “Enter.”
How do I sync my Uniden phone with base?
On the base station,
press the HANDSET LOCATOR button for at least four seconds
, and then release the button. Both LEDs on the base station begin to flash. Press the # key on the handset to begin registration. The process takes up to 10 seconds to complete.
What does T coil mean on Uniden phone?
T-coil Reduce noise on hearing aids equipped with a
telecoil
(T-coil) feature. It shortens talk time, so keep your battery fully charged. Ringer Tones Choose the handset's ring tone. As you highlight each ring tone, you hear a sample.
How do you reset a Uniden phone?
- Remove the batteries. Turn the phone handset over. …
- Enter the key code combination. Hold down the “#” and “*” keys at the same time, while re-inserting the batteries.
- Press the right-side menu button. …
- Place the handset on the base.
How do I setup my Uniden Xdect phone?
1) Press MENU/SELECT to display the handset's main menu. 2) Select the
Bluetooth Setup
menu, then select the Add Mobile phone submenu. The base goes into pairing mode when the handset displays Search & select from Mobile XDECT 8315 PIN: 0000. 3) On your Bluetooth phone, start a search for other Bluetooth devices.
How do I register my DECT phone?
Press and hold HANDSET LOCATOR
(or FIND HANDSET), located on the base, for about four seconds, until the IN USE light on the base turns on. Press # on the handset. It will first display Registering, followed by Registered.
How do you reset a Uniden cordless phone?
- Disconnect the Battery.
- Press and Hold the Star and Pound key.
- Reconnect the battery while holding down both keys.
- Wait for the long beep.
- De-register and Re-register the handset, if this doesn't resolve the issue.
- Clear the memory of the handset.
Why does my Uniden phone keep flashing?
How can I make it stop? The flashing/beeping
indicates you may have voice mail messages
. Voicemail is provided by your telephone company and they would be able to assist you with retrieving those messages. Once you have listened to the new messages, the blinking light will stop.
How do I take my home phone off Do Not Disturb?
- Dial *78# on your home phone to activate the Do Not Disturb feature. When activated, callers hear “The party you called is not currently accepting calls. Please try again later.”
- Dial *79# to deactivate the feature when you are ready to receive calls.
The DECT button is located on
either the back or side of your gateway
.
What is T-coil setting on phone?
T-coils can
link up to a sound system
–like a television, a public announcement system, or a cell phone–by acting as a receiver for a loop sound system. When you use your cellphone, the t-coil in your hearing aid switches off the microphone so you are only hearing the sound you want to hear – your phone conversation.
How do I setup my Uniden answering machine?
- Press Menu and select Ans. Setup.
- Select Line 1 or Line 2, then select Record Greeting.
- Press Start. Wait for the system to say “Record greeting”, then begin your recording.
- When you're finished, press Stop. The system plays back your new greeting.
- To keep this greeting, press Stop again.
How do I retrieve voicemail on my Uniden phone?
- Press the “Menu” key on your Uniden handset. Scroll through the menu until you locate the voicemail icon. …
- Press the “Select” key to access the feature. Wait for the phone to dial your voicemail number.
- Enter your password when prompted to do so. …
- Follow the prompts to check your messages.
How do I connect my router to my DECT phone?
The next step is simple and requires you to connect the analog home phone to the back of your router through a cable. You will have to
look for a phone adapter port at the back of your router
and sometimes it is labeled as “Phone 1”. Congratulations your landline is now connected to your Wi-Fi and ready to use.
How does a DECT phone work?
How does DECT work? … A DECT system
always contains two components that constantly communicate with each other
. The two components are a base station, also called the fixed part, and at least one handset, or portable part. The base station forms the bridge between the telephone and Internet connection and the handsets.