You can unlock the radio in your Ford Mondeo from
the seven digit serial number beginning with M or V
. You will find the serial number printed on a label or by pressing 1 & 6 on the radio. All Ford Mondeo Radio Codes are shown instantly on screen.
How do I get the code for my Ford radio?
You can get the code for your Ford car radio, required after a power interruption (battery change, dead fuse, etc) very easy by
providing the serial number
. If you have a 2004 or newer radio, you can find this serial on screen by holding the buttons 1 and 6 or sometimes 2 and 6.
How do you unlock a Ford radio without the code?
Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio.
Press and hold down the audio power button together with the SEEK button for about 50-60 minutes
. Then, it will turn on without entering the radio code.
How do I get the code for my Ford Fiesta radio?
To find the radio code for your ford fiesta you
must first turn on the radio and hold the preset buttons 1 and 6 for 3 seconds
. A code cycle will start and then display the serial number.
How do I get my Ford Mondeo radio code?
You can unlock the radio in your Ford Mondeo from
the seven digit serial number beginning with M or V
. You will find the serial number printed on a label or by pressing 1 & 6 on the radio. All Ford Mondeo Radio Codes are shown instantly on screen.
How do I reset my Ford radio code?
Press the
hour button
, and release it when a 4-digit code is shown. Press the mode button and put on the stereo deck. Make sure the radio is on and press and hold buttons 1 and 6 for a few seconds. Wait about 20 seconds before you can see the serial number on the screen.
Can I get radio code from VIN number?
The code is located on a card that comes with the original purchase of the vehicle, which we don't have. A person can call the dealership with the serial number of the radio and Vehicle Identification Number (VIN) of the vehicle
and ask for the radio code
.
Where can I find my radio code?
The best place to locate a radio code is in the owner's manual of your car. In most cases, the owner's manual will be located in your glove box and will include general automotive service and maintenance tips, along with instructions on how to operate each system on the vehicle.
How do I find my radio serial number?
Before you can unlock your radio we require the radio's serial in most cases to locate your serial number you will need to
remove the radio and find the radio label
which is located on the top or side of the radio casing. In some cases the radio's serial number will be engraved into the unit.
How do you enter radio codes?
Turn your vehicle and car radio on. The word “Code” or “Locked” may appear.
Enter your serial code using the numbered stereo buttons
. For example, if your code is 24367, enter the numbers “2-4-3-6-7” using the numbered buttons on your stereo system or touch screen.
How do you set the radio in a Ford Fiesta?
- Choose your Source by pressing AM, FM or Sirius.
- Press Direct Tune.
- Enter the desired station or channel, and press Enter.
- Press a Preset Bank to add the station, and then press and hold one of the Memory Preset buttons to save it.
How do I get the code for my Ford Focus radio?
You can unlock the radio in your Ford Focus car from
the seven digit serial number beginning with M or V
. You will find the serial number printed on a label or by pressing 1 & 6 on the radio. All Ford Focus Radio Codes are shown instantly on screen.
How do I reset my Ford Focus radio code?
You can't reset the radio key-code for your Focus, but, you can retrieve the
original code for it through this website from the unit serial number
. For example, if you have a 2008 or newer model, you can find the serial on the radio screen by pressing button 1 and 6 for a few seconds.
How do I unlock my car radio?
Go to a car dealership
. Take your car to its manufacturer dealership to get the stereo unlocked. For example, if your car is a Honda go to a Honda dealership. Once you have proven that you are the owner of the car, the dealership will be able to retrieve the code from the manufacturer and activate the radio for you.
Why is my car radio asking for a code?
Every time the battery is disconnected or becomes completely dead the radio will
ask for the code. In most cases, you can just press and hold the power button for 2 seconds and the radio will automatically reset and start working properly without entering the code.
What are the radio ten codes?
- 10-1 = Receiving poorly.
- 10-2 = Receiving well.
- 10-3 = Stop transmitting.
- 10-4 = Message received.
- 10-5 = Relay message to ___
- 10-6 = Busy, please stand by.
- 10-7 = Out of service, leaving the air.
- 10-8 = In service, subject to call.
